AMIO 02892 Headlight Restoration Kit User Manual
- October 30, 2023
- AMiO
Table of Contents
AMIO 02892 Headlight Restoration Kit
FEATURES
- Designed to restore clarity to headlight lenses that have become yellowed, cloudy or hazy.
- Headlight lens restoration kit improves the performance of the headlight.
- Three easy steps: sand, polish and protect.
- Easier than replacing an old headlight.
- Comes with easy-to-use instructions.
- Car headlight restoration kit does not include household polishing machine.
- Restores headlights, tail lights, fog lights or directional lights.
- This kit is intended to restore 2 headlights.
CAUTION: Avoid any contact with eyes, skin and the body of the vehicle. KEEP OUT OF REACH OF CHILDREN!
INSTRUCTIONS
Prepare: Clean the headlight lens with water. Shield the area surrounding the lens to avoid scratches on nearby painted surfaces.
- SANDING: Wet the sanding disc and attach it to the backer pad. Sand with three different grits to completely remove the heavy yellowing, fading and corrosion. NOTE: Use the sanding discs from coarse to fine: P800, P1200, P2000. Otherwise will result in restoration failure.
- POLISHING: Attach the wool polish disc to the backer pad and apply the polish paste. Polish the lens until shine is restored to its original condition. NOTE: For best results, use an electric buffer or polisher. If polishing by hand, polish with no less than 200 circular strokes clockwise.
- PROTECTION: Clean the headlight lens and make sure the lens is dry before continuing this step. Make sure the headlight is not under sunlight (VERY IMPORTANT). Using the white sponge disc provided in the kit, evenly apply a layer of the protective liquid on the surface of the lens. Allow the protective liquid to sit and dry for 15 minutes. Then, allow the liquid to cure in direct sunlight for 1 of 2 hours.
- AFTER STEP 3: Keep the lens dry and do not allow it to be ex-posed to moisture. Do not wash the car for 24 hours. NOTE: Please must avoid any sunlight when apply the protect liquid on headlight (VERY IMPORTANT)
ENVIRONMENTAL PROTECTION
To prevent damage during transport, the appliance is packed. This packaging is raw material that can be reused or recycled. The appliance and its accessories consist of various materials, such as metal and plastic. Please take damaged appliance parts to a recycling collection point. Recycling as an alternative to the obligation to return the appliance: As an alternative to the obligation to return the appliance at the end of its useful life, the owner is obliged to participate in its proper disposal. The end-of-life unit may also be taken to a recycling collection point, which will dispose of it in accordance with the national regulations concerning waste and the use of secondary raw materials.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>