HyVibe System2 Sound Amplifying Device User Manual
- June 13, 2024
- HyVibe
Table of Contents
User Manual – HyVibe System 2
www.hyvibe.audio
System2 Sound Amplifying Device
Copyright 2023 HyVibe. All rights are reserved. No one is permitted to
reproduce or duplicate this manual, in any form, or any part thereof without
permission from HyVibe.
HyVibe™® is a registered trademark of HyVibe, 2023.
If you have any questions regarding HyVibe products or services, please
contact us at: info@hyvibe.audio
HyVibe
51 Rue de Maubeuge
75009 Paris
The HyVibe System 2 is a sound amplifying device that uses a vibration control
system composed of actuators, a high-speed processor, and a Bluetooth module
to turn acoustic instruments into its own amplifier, connected speaker,
recorder, looper, and multi effect processor.
COMPLIANCE STATEMENTS
FCC COMPLIANCE NOTICE Model Numbers: HyVibe System 2
FCC ID: 2AR2L-H2
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This Class [B]
digital apparatus complies with Canadian ICES-003. CAN ICES-3 (B) / NMB-3 (B)
This device complies with FCC and Industry Canada RF radiation exposure limits
set forth for general population. It must not be co-located or be operating in
conjunction with any other antennas or transmitters.
NOTE: HyVibe is not responsible for unauthorized equipment modifications
that could violate FCC rules, and/ or void product safety certifications.
EU Declaration of Conformity CE: Hereby, HyVibe declares that the HyVibe
System 2 is in compliance with the essential requirements and other relevant
provisions of Directive 2014/30/EU. The Declaration of Conformity can be found
at: www.hyvibe.audio/cedoc
HyVibe System 2 complies with:
IEC 61000-6-1
2005 Electromagnetic compatibility (EMC)
Part 6-1: Generic standards
Immunity for residential, commercial and light-industrial environment
SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this device near water.
- Clean only with a dry cloth.
- Only use attachments/accessories specified and/or included by the manufacturer.
- Refer all servicing and installations to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNINGS
-
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
-
Do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to spill liquids into any part of the product.
Exposure to liquids may create a failure and/or fire hazard. -
Do not place naked flame sources, such as lighted candles, on or near the product.
-
Do not subject batteries to mechanical shock.
-
In the event of a battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
-
Do not use any charger other than that specifically provided for use with the equipment.
-
Do not leave a battery on prolonged charge when not in use.
-
After extended periods of storage, it may be necessary to charge and discharge the batteries several times to obtain maximum performance.
-
Batteries give their best performance when they are operated at normal room temperature 68°F (20°C) ± 9°F (5°C).
-
The battery provided with your system is not user serviceable. Contact HyVibe for all battery related issues.
BATTERY WARNINGS
TERY WARN
Only use the included 2200mAh / 7.4V Li-ion battery.
Do not open or mutilate the batteries. Released electrolyte from the batteries
is corrosive and may cause burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
Exercise care when handling the batteries. Do not allow conductive materials
such as rings, bracelets or keys to touch the batteries, otherwise a short
circuit may cause the batteries and / or conductive material to overheat and
cause burns.
Expected battery life: 8 hours of full use.
INSTALLATION
Refer all installations to qualified service personnel. Contact HyVibe (info@hyvibe.audio) for more information.
USER INSTRUCTIONS
CONTROL BUTTONS/KNOBS
TURNING ON/OFF
To turn the HyVibe System 2 on, quickly press the volume knob. To turn the
HyVibe System 2 off, press the volume knob for 2 seconds.
EFFECTS
The HyVibe System 2 is equipped with preloaded guitar effects. To enter
effects mode, scroll the function menu with the Button 1 or 3 until ‘Effects’
appears on the OLED screen. Click on Button 2 to enter ‘Effect’ mode. The OLED
screen will then display the name of the effect that is activated. You may
scroll through the different effects by pressing Button 1 or 3.
Effect parameters can be altered with Button 4,6 and the volume knob. The
volume of the effect can be raised or lowered with the volume knob.
LOOPER
HyVibe System 2 is equipped with a recorder and looper. To enter Record and
Loop Mode, scroll the function menu with Button 1 or 3 until ‘Looper’ appears
on the screen. Click on Button 2 to enter ‘Looper’ mode.
Click Button 3 to activate the recorder and looper. After pressing Button 3
you will hear a 4 beat countdown. After the countdown, the recording begins
and will record 4 measures of playing from the guitar. The recording will
automatically stop and replay. To stop the playback, press Button 1. To replay
the playback, press Button 1. The time signature of the recording can be
adjusted in the Metronome mode.
SPEAKER MODE
The HyVibe System 2 can function as a Bluetooth Speaker. To enter Speaker
mode, scroll the function menu with Button 1 or 3 until ‘Speaker’ appears on
the screen. Click Button 2 to enter ‘Speaker’ mode and move the cursor to the
ON position.
Search for and pair with ‘HyVibe’ on your Bluetooth device. Once connected,
your media can be streamed from your Bluetooth device through the HyVibe
System 2.
AUX OUT
The HyVibe System 2 can be connected to an amplifier when in auxiliary mode.
To access ‘auxiliary out’ mode, connect a ¼” guitar cable from the
amplifier/pa to the output jack.
TUNER
The HyVibe System 2 contains a tuner function. To enter the Tuner mode, scroll
the function menu with Button 1 or 3 until ‘Tuner appears on the OLEO screen.
Click on Button 2 ‘Tuner’ mode.
When a guitar string is played, the note that it is closest to will appear on
the OLEO screen. When the indicator is to the right of the note, this
indicates that it is ‘sharp’.
BATTERY
CHARGING INSTRUCTIONS
There is a battery level indicator on the OLED screen. To charge the HyVibe
System 2, connect the provided USB-C connector to the Charging Port. Only use
the provided charger (5 volt, 2.5a).
Refer to the LED on the HyVibe System 2 – the LED will blink when charging is
taking place and will be solid when the device is fully charged. Disconnect
charger when device is fully charged. Contact dealer for replacement charger.
WARRANTY
Your product is covered by a limited warranty. Details of the limited warranty
are provided on the product registration card in the carton. Please refer to
the product registration card for instructions on how to register. Failure to
register will not affect your limited warranty rights. The warranty
information provided with this product does not apply in Australia or New
Zealand.
Contact your dealer for details of the Australia and New Zealand warranty.
NOTES
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HyVibe is under license.
Please refer to
www.hyvibe.audio/usermanuals for
updates to this manual. For any product questions or safety issues, contact
us by email at contact@hyvibe.audio.
CE STATEMENT
Herby, Shenzhen Sun chip Technology Co., Ltd declares that this HyVibe System
2，H2 is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.
In accordance with Article 10(2) and Article 10(10), this product allowed to
be used in all EU member states.
Use the HyVibe System 2 in the environment with the temperature between -20 ℃
a nd 25℃,
Use careful with the earphone maybe possible excessive sound pressure from
earphones and headphones can cause hearing loss.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
The product shall only be connected to a USB interface of version USB-C
Operation Frequency:
For BT: 2402MHz~2480MHz
For BLE: 2402MHz~2480MHz
Max Output Power:
For BT: 0.0045W
For BLE: 0.0071W
Manufacturer：Shenzhen Sun chip Technology Co., Ltd
Address：2nd -3rd Floor, Building 4, Faun Industry Area Phase 2, Dayan
Development Zone,
Flying, Baan, Shenzhen, China.
E-mail: jenny@sunchip-tech.com
Importer：HyVibe
Address：51 Rue de Maubeuge, 75009 Paris, France
DECLARATION OF CONFORMITY
l hereby declare that the product
Product:
Product Name: HyVibe System 2
Model: H2
Brand Name: 114 HyVibe Hardware Version. HyVibe-H2-V.3.1
Software Version: V1.3.0
Accessories:
Battery information:
Model: 18650-2S
Specification: 7.4V. 2200mAh.16.28Wh
Manufacturer: Dongguan Shunning Energy Technology Co.,Ltd.
USB Cable Information:
Model: Type-C USB cable Length: 1.0 M
Manufacturer: Shenzhen Yanwangxing Technology Co.,Ltd
Name of product. type or model, batch or serial number I
satisfies all the technical regulations applicable to the product within the
scope of Council Directives 2014/53/EU. 2014;35/EU and 2014130/EU. And declare
that the same application has not been lodged with any other notified body. EN
IEC 62368-1:2020+A11:2020
EN 50663:2017
EN 62479:2010 ETSI
EN 301 489-17 V3.2.4 (2020-09) ETSI
EN 301 489-1 V2.2.3 (2019-11) ETSI
EN 300 328 V22.2 (2019-07)
EN 5503220154112020+M 2020
EN 550352017+A112020
EN IEC 610003-22019+Al2021
EN 61000332013412019+A22021
(Title(s) of regulations. standards. etc
All essential radio test suites have been carried out.
NOTIFIED BODY Mincom Labs Inc Address
575 Boulder Court.
Pleasanton. California94566 USA
Identification Number: 2280
MANUFACTURER or AUTHORISED REPRESENTATIVE.
Address
Shenzhen Sun chip Technology Co Ltd
2nd -3rd Floor, Building 4, Faun Industry Area Phase 2. Dayan Development
Zone, Flying, Baan. Shenzhen. China.
This declaration is issued under the sole responsibility of the manufacturer
and, if applicable, his authorised representative.
Point of contact:
Jenny Yao, 18689215591)0755 23086272
(Name telephone and fax number)
2023-09-12
(place date of issue)
(Signature)
Jenny Yao. Sales manager
(Name and title in block letters)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>