IAdea XMP-7500 Digital Signage Player User Manual
- October 30, 2023
- IAdea
Table of Contents
IAdea XMP-7500 Digital Signage Player
Introduction
The XMP-7500 is a media player unit that supports various video and image formats, audio codecs, and dynamic content. This document provides information on the hardware of the XMP-7500.
Package contents
The package includes the following:
- Media Player Unit
- AC Adapter (with select power plug)
- Wireless Antenna
- HDMI Cable
- Velcro (2 sets)
- Power & micro SD card brackets
- NOT INCLUDED: A USB mouse is required for
system setup
Installation
Attach wireless antenna
Attach the wireless antenna as shown below, and then screw the antenna clockwise onto the post.
(Image of attaching wireless antenna)
Mounting options
Option 1: Attach on the back of the monitor using Velcro
To mount the player on the back of the monitor using Velcro, follow these steps:
- Separate the Velcro pads, and stick on the bottom of player as shown in right.
- Stick the other Velcro pads onto the back of monitor, and then attach the player to it.
- Use HDMI cable to connect player and the monitor.
(Image of mounting option 1)
Option 2: Built-in wall mount bracket
To mount the player with the built-in mount bracket, refer to the drawing below for mounting hole and its dimension. The mounting hole is highlighted in RED, screw thread: M4. (Image of mounting option 2)
Physical View
(Image of physical view of the XMP-7500)
Technical Data
Specifications
- Video format support: H.265 (up to 4K@60p), H.264 (up to 1080p,10Mbps), VC-1 (up to 1080p,10Mbps), MPEG-4 ASP (up to 1080p,10Mbps)
- MPEG-2 (up to 1080p,10Mbps), POPAI Screen Media Standards: S6 to S12, E4,E7,E8
- Image format support: JPEG, PNG up to 4K, POPAI Screen Media Standards: S1 to S3, E1 to E3
- Audio codec support: MP3 up to 320Kbps, POPAI Screen Media Standards: S4, S5
- Dynamic content: W3C HTML5 (HTML, CSS, JavaScript), W3C SMIL 3.0 instructions (sub-set)
- Physical I/O connectors: HDMI 2.0, USB 2.0 x 2, RJ45 Ethernet port (Giga LAN), Wireless antenna port, Micro USB for ADB, Micro SD card slot, Audio out (3.5mm Analog), LED: Power(green)/Status(orange)
- Local storage: 16 GB eMMC, Micro SD card expansion slot
- Accessories: AC adapter(UL/CB/PSE certified power supplies), HDMI cable, Wireless antenna, Velcro ( 2 sets ), Micro SD card slot bracket/screw x1, Power jack bracket/screw x1
- Power requirement: 12V 1.5A DC
- Power consumption: 7.0 W
- Environmental: CE/FCC/IC
- Dimensions: Top housing: 166 x 99 x 25mm (6.54 x 3.90 x 0.98 inches), Base: 166 x 125 x 27mm (6.54 x 4.92 x 1.06 inches)
- Weight: 445 g (0.98 lbs)
- Certifications: CE/FCC/IC
- Warranty: One-year limited parts & labor
Overview
This document describes the hardware of the XMP-7500.
Package contents
NOT INCLUDED
A USB mouse is required for system setup.
Installation
Attach wireless antenna
Attach the wireless antenna as shown below, and then screw antenna clockwise
onto the post.
Mounting Option
[Attach on the back of the monitor using Velcro] Separate the Velcro pads,
and stick on the bottom of player as shown in right. Stick the other Velcro
pads onto the back of monitor, and then attach the player to it. Use HDMI
cable to connect player and the monitor.
Mounting Option
[Built-in wall mount bracket] Mount the player with the built-in mount
bracket, refer to below drawing for mounting hole and its dimension, mounting
hole is highlighted in RED, screw thread: M4.
Physical view
Physical features (left to right in above illustration)
- 3.5 mm jack audio out
- Ethernet port for network content update
- HDMI 2.0 connector for digital video and audio combined output
- DC input port
- Micro USB for ADB , Android debug console port
- Power(green) and Status(orange) LED indicator
- USB ports for USB content update and configuration
- Reset button to perform factory reset
- Kensington lock hole
- Wireless antenna post
- Micro SD card slot
Technical Data
Specifications
| XMP- 7500
---|---
Video format support| H.265(up to 4K@60p)
H.264 (up to 1080p,10Mbps) VC-1 (up to 1080p,10Mbps)
MPEG-4 ASP (up to 1080p,10Mbps)
MPEG-2 (up to 1080p,10Mbps)
POPAI Screen Media Standards : S6 to S12, E4,E7,E8
Image format support| JPEG,PNG up to 4K
POPAI Screen Media Standards : S1 to S3, E1 to E3
Audio codec support| MP3 up to 320Kbps
POPAI Screen Media Standards : S4, S5
Dynamic content| W3C HTML5 (HTML, CSS, JavaScript)
W3C SMIL 3.0 instructions (sub-set)
Physical I/O connectors| HDMI 2.0
USB 2.0 x 2
RJ45 Ethernet port (Giga LAN) Wireless antenna port
Micro USB for ADB Micro SD card slot
Audio out (3.5mm Analog)
LED: Power(green)/Status(orange)
Local storage| 16 GB eMMC
Micro SD card expansion slot
Accessories| AC adapter(UL/CB/PSE certified power supplies) HDMI cable
Wireless antenna Velcro ( 2 sets )
Micro SD card slot bracket/screw x1 Power jack bracket/screw x1
Power requirement| 12V 1.5A DC
Power consumption| 7.0 W
Environmental| Operating temperature: -20 – 50°C / -4 – 122°F Humidity:
5 – 85% @ 45 °C / 32 – 113°F non-condensing
Dimensions| Top housing: 166 x 99 x 25mm (6.54 x 3.90 x 0.98 inches)
Base: 166 x 125 x 27mm (6.54 x 4.92 x 1.06 inches)
Weight| 445 g
0.98 lbs
Certifications| CE/FCC/IC
Warranty| One-year limited parts & labor