JIECANG JCHR35W3C3 Hand-held LCD Remote Controller User Manual
- June 10, 2024
- JIECANG
Table of Contents
JCHR35W3C3/C4/C5
Hand-held LCD Remote Controller
User Manual
Product Info
Buttons
Parameters(more info please refer to the nameplate)
Electricial Specification | Standard |
---|---|
Battery Type | AM battery*2 |
Working Temperature | -10t-50t |
Radio Frequency | 433.92M±100KHz |
Transmit Distance | >=30m indoor |
Caution!
- The transmitter should not be exposed to moisture or impact, so as not to affect its life
- During use, when the remote control distance is significantly shorter or less sensitive, please check whether the battery needs to be replaced.
- When the voltage is too low, the LCD screen digital display will be weak, prompting to replace the battery.
- Please properly dispose of used batteries according to the local garbage classification and recycling policy.
Instructions
a. Channels & Groups Toggling
Note: Channel 0 is the group control for all the channels.
Note: Max & Min number is 16&1 when it’s set under channel 1-16
c. Number of Groups Setting
Note: Max & Min number is 6&0 when it’s set under channel 0.
d. Channel in Group Setting
Note: Channel in groups setting is under GROUP 1-6.
e. Check the Channels in Groups
f. Prohibit Dual-key Operation
Repeat the above, dual-key operation activated
Note: When dual-key operation prohibited, these programming setting
functions are not allowed.
g. Position Percent Setting
Note: All the shades under same group will run to same position after
percent setting.
h. For other operations, please refer to the motor operation instruction