JIECANG JCHR35W1C 16-Channel LCD Remote Controller User Manual
- June 10, 2024
- JIECANG
Table of Contents
JIECANG JCHR35W1C 16-Channel LCD Remote Controller
Product Info
The 16-channel LCD Remote Controller is available in two models Wall-Mounted and Hand-held. The controller is used to control the channels of a connected device.
Models & Parameters (more info please refer to the nameplate)
The Wall-Mounted and Hand-held models have the following parameters. Please refer to the nameplate for more information.
- Model: Wall-Mounted 16-channel LCD Remote Controller
- Model: Hand-held 16-channel LCD Remote Controller
Buttons
The controller has multiple buttons that allow the user to control the channels of the connected device.
Caution!
Use the controller as per the instructions mentioned in this manual. Improper usage may lead to damage to the device.
Instructions
Note : Channel 0 is the group control for all the channels. To add a channel to the group:
- Short press the button corresponding to the channel number. The channel number will be steady-lit.
- Short press the button again, if you want the Channel not in the group, and the Channel number will be flashing.
To set limits
- Press and hold the button corresponding to the channel number for 3 seconds.
- Stop on the desired percentage down and wait 3 seconds. The shades will move to the chosen percentage down position.
Product Information
Buttons Function
- front
- back
Models & Parameters (more info please refer to the nameplate)
Caution!
Product Instructions
Note: Channel 0 is the group control for all the channels.
Note : Max & Min number is 16&1 when it’s set under channel 1-16
Note : Max & Min number is 6&0 when it’s set under channel 0.
Note : Channel in groups setting is under GROUP 1-6.
Note : LCD will show “EC” if there is no detailed channel.
Note : When dual-key operation prohibited, these programming setting functions are not allowed, such as limits setting.
Note : All the shades under same group will run to same position after percent setting. h For other operations, please refer to the motor operation instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>