Verbatim 66817 External Slimline CD DVD Writer USB 2.0 User Manual

External Slimline
CD/DVD Writer USB 2.0
User Manual

Thank you for choosing this Verbatim product. Please read this manual carefully prior to use so as to fully understand the product and its correct usage.

Package Contents:

• EXTERNAL SLIMLINE CD/DVD WRITER USB 2.0
• USB-A to DC POWER CABLE
• USB-A to USB-B (USB 2.0) CABLE
• USER MANUAL

Product Specifications:

CD-R: 24x; CD-RW: 16x; DVD-RAM: 5x
Read types| DVD+R / DVD+RW / DVD-ROM; DVD-R / DVD-RW / DVD-ROM; DVD+R9 (double layer); DVD-R9 (dual layer); CD-R / finalized CD-RW / CD-ROM;
DVD-RAM; Video CD, Data / CD-DAE;
Burn types| DVD+/-R; DVD+/-RW; DVD+/-R DL; CD-R ;
CD-RW; DVD-RAM
Burning mode| For CD-R / RW DVD-R / DVD-RW disc:
1. Disc At Once (DAO)
2. Session At Once (SAO)
3. Track At Once (TAO)
4. Variable Packet Write
5. Fixed Packet Write
Supported OS| Windows 11 /10 / 8.1 / 7; MacOS X v 10.6 or
higher; Linux
Minimum hardware requirements| •USB 3.0 or USB 2.0 port*
•At least 2GB of free hard disc space (10GB recommended)
Power supply| USB Powered
Power Input| 5 V, Reading / Writing 1.1/1.5 A

How to use

Step 1

Connect “USB-A to USB-B CABLE” & “USB-A to DC Power CABLE” to the port of your PC. (1) USB-A (power transfer) (2) USB-A (data transfer) For most computers, power through the data transfer port alone will be sufficient. If the USB bus on your computer does not provide enough power to run the drive, connect (1) USB power cable “USB-A to DC Power CABLE” to the PC or a 5V/1A power adapter (preferred way to get more power, separately purchase). Please avoid using an adapter with power over 1A that may cause damage to the device. Step 2

Connect the USB cables to the writer.
Windows Connection Setting

1. Connect the external writer to the USB port of your PC via a connecting cable. An alert will pop up on the system tray at the bottom right of the screen. Driver installation will commence automatically.

2. If you click on the “Windows” shortcut, the optical drive icon can be found in “Removable Storage”.

3. Double click the optical drive icon, or choose “Pop Up” from the menu by right-clicking the icon, a pop-up window prompt you to insert a disc.
   

4. Insert a disc into the pop-up tray. The indicator light will turn on to signal that the writer is functioning.

5. Burning software installation is required to perform the disc-burning functions.

Remarks:

1. If the external writer performs below expectation, please try with 5V/1A power adapter (Purchase Separately);
2. Playback software & burning software not included. To be purchased or downloaded separately.

Troubleshooting

If the writer is not working as described, please check the following:

1. Ensure the driver is properly installed. Turn off anti-virus software during installation.

2. Switch to other USB ports.

3. Connect the writer directly to the PC without connecting through the hub or an extension cable.

4. If your writer fails to read: check if the disc is placed properly;
   Clean dirt or dust on the disc recording side with a lint-free cloth; replace with a new disc; confirm if the disc format is supported by the writer.

5. If your writer fails to playback: Check the compatibility of the player software.

6. Noise: Replace with another disc to ensure that poor disc quality is not the underlying issue.

7. Hardware issues: Check if your system meets the minimum 0S & hardware requirements.

8. Connection Issues e-Check if the cable is connected properly to your computer and the writer.

• Check if your writer has power. Try ejecting the disc to see if the writer is getting power.

• Check if your OS recognizes the writer. If not, try inserting a disc into the drive to re-establish a connection.

• Check if your USB port is working. If not, try another USB port or check your Universal Serial Bus Controllers in your Device
  Manager. Be sure to:

• Ensure your USB driver is up-to-date.

• Check your USB selective suspend settings. Advanced power settings may disable power to your USB port.

• If you’re using Windows, check if the Fast Startup is turned off.
  In Windows 10 and higher, Fast Startup disables some USB connections. Check your power options to ensure it is disabled.

• Check if the writer is enabled. In Windows, check your device manager to ensure the writer is enabled.

Caution

• Do not stare directly into the laser beam.
• Do not alter, modify or disassemble the device. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazards.
• Do not drop or subject the device to strong mechanical shock or strong electromagnetic fields.
• Keep the device away from heat sources, direct sunlight, combustible sources, gas, humidity, water or other liquids.
• Do not insert any objects into the ports or openings of the device.
• Do not operate the device if it has been dropped or otherwise damaged in any way.
• Contact your Verbatim Customer Service Centre if you have any issues when using this device.

FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,  which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CE Declaration

Complied the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EC) and Low Voltage Protection 2006/95/EC.
This declaration applies to all specimens manufactured identical to the model submitted for testing/evaluation.

EN 55032:2012+ AC:2013 (Class B)
EN 61000-3-2:2014
EN 61000-3-3:2013
AS/NZS CISPR 32:2013
EN 55024:2010
IEC 61000-4-2: 2008
IEC 61000-4-3: 2006+ A1:2007+ A2:2010
IEC 61000-4-4: 2013
IEC 61000-4-5: 2014
IEC 61000-4-6: 2013
IEC 61000-4-8: 2009
IEC 61000-4-11: 2004

RoHS Compliance
This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 18 December 2006, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (ROHS) and its amendments.
Substances of Very High Concern (SVHC) including 169 substances contained in the Candidate List of June 20th, 2016 are not present in this product range above permitted levels.

Note
Verbatim may at any time revise the content of this user guide without further notice.

Rights
Copyright © 2022 Verbatim. No part of this document may be reproduced in any form or by any means, for any purpose, without the express written permission of Verbatim. All rights reserved.
All other brands and product names referenced herein are property of their respective owners,

Verbatim Australia Pty Ltd (ABN 39 005 706 374)
Warranty Statement
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Verbatim Australia Pty Ltd (ABN 39 005 706 374) (“Verbatim”) provides the following warranty in relation to its goods (“Product”). The benefits of this warranty are in addition to any rights and remedies imposed by Australian State & Federal legislation that cannot be excluded. Nothing in this warranty is to be interpreted as excluding, restricting or modifying any State or Federal legislation applicable to the supply of goods and services which cannot be excluded, restricted or modified.
Verbatim warrants that, subject to the exclusions and limitations below, the Product will be free from defects in materials and workmanship for the period specified on the product packaging and/or the website from the date of purchase. If a defect appears in the Product before the end of the warranty period and Verbatim finds the Product to be defective in materials and workmanship, Verbatim will at its own discretion repair or replace the Product free of charge.
If goods presented for repair are capable of retaining user-generated data, repair of these goods may result in loss of the data.
Proof of Purchase shall be required to be eligible for this warranty and to establish the commencement date of this warranty. This warranty is valid for the original purchaser only and is not transferrable to a subsequent customer if the Product is sold by the original customer during the warranty period. The term of your warranty period shall commence from the purchase date appearing on your purchase receipt from an authorized distributor, reseller, or retailer and extends only for the time set forth in the Product documentation. This information can be obtained from the packaging and/or the Verbatim Australia website.

Returned Merchandise Authorisation
No product may be returned to Verbatim Australia without first contacting us for an RMA (Returned Merchandise Authorisation) number. If it is determined that a Product may be defective, you will be given an authorization number and instructions for Product return. An unauthorized return, i.e. one for which an RMA number has not been issued, will be returned to you at your expense.

Authorized returns are to be shipped prepaid and insured to our
Head Office in qualified packaging.

Warranty Claims

1. If a fault covered by warranty occurs, the customer must first:
   a)Contact Verbatim Australia Head Office using the contact details provided below; or
   b) Return the Product to the retailer from which the Product was purchased.

2. Any warranty claim must be accompanied by:
   a) Proof of purchase; and b)Full details of the alleged defect.

3. If Verbatim or the retailer from which the Product was purchased finds no defect in the Product after inspection and testing, the customer must pay Verbatim’s usual costs  of service work and testing.

4. The customer must bear the cost of the transport to Verbatim or to and from the retailer to make the warranty claim including all insurance of the Product. Verbatim will bear the cost of the return transport to the customer once the claim has been.

Exclusions
The warranty will not apply where:

1. The Product has been repaired, altered or modified by someone other than Verbatim or an authorized repair agent;
2. The alleged defect in the Product is within acceptable industry variances;
3. Verbatim cannot establish any fault in the Product after testing and inspection;
4. The Product has been used other than for the purpose for which it was designed;
5. The defect in the Product has arisen due to the customer’s failure to properly use and maintain the Product in accordance with Verbatim’s instructions, recommendations  and specifications (including applicable maintenance schedules);
6. The Product has been subject to abnormal conditions or use, including environment, temperature, water, fire, humidity, pressure, stress or similar;
7. The defect has arisen due to abuse, misuse, neglect or accident.

The warranty does not extend to:

1. Damage or defects caused by normal wear and tear;

2. General, consequential, punitive, incidental or special damages.
   These include loss of recorded data, interruption of use, the cost of recovery of lost data, lost profits and the cost of the installation or removal of any Products, the installation of replacement Products, and any inspection, testing or redesign caused by any defect or by the repair or replacement of Products arising from a defect in any Product.

3. Incompatibility or poor performance due to specific computer or hardware used.
   Limitations
   Verbatim makes no express warranties or representations other than set out in this warranty.
   The replacement of the Product or part of the Product is the absolute limit of Verbatim’s liability under this express warranty.
   Contact Details

Verbatim Australia Pty Ltd
Unit 6, 450 Princes Highway, Noble Park, Victoria 3174, Australia
Tel: +61 39790 8999 Fax:+61 3 9790 8955
Email: support@verbatim.com.au
Website: www.verbatim.com.au

1 Year Limited Warranty — for further details visit
www.verbatim.com/warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>