Dyson UP13 Ball Animal Corded Vacuum Cleaner User Manual

Dyson UP13 Ball Animal Corded Vacuum Cleaner

**In The Box

**

Some tools and accessories may not be included.

You can buy additional tools and accessories at www.dyson.com.

Combination Tool

Two tools in one – brush and nozzle, for versatile cleaning around your home.

This tool has a combination of brush head and crevice tool together in one unit. The brush head slides down the crevice tool when needed.

Stair Tool

For vacuuming narrow or difficult-to-reach carpeted areas, such as stairs and corners.

A wide mouth tool with a lint edge.

Tangle-Free Turbine Tool

Counter – rotating brush heads remove hair from carpets and upholstery.

No tangles.

A small cleaner head with a body housing the motor and an electrical connector to attach to the wand or directly to the machine.

Soft Dusting Brush

Enclosed in a skirt of soft nylon bristles for gentle, vacuum-assisted dusting of delicate objects and surfaces.

Soft bristles are on the underside of this tool.

Fabric And Mattress Tool

Removes dust, dirt and allergens from mattresses and upholstery.

A wide, triangular shaped nozzle.

Articulating Hard Floor Tool

Swiveling brush head with an ultra-slim profile to reach difficult spaces. With soft nylon bristles to remove dust and allergens.

A long rectangular tool with a jointed connection and soft bristles on the underside.

Pet Groom Tool

A spring – loaded head with metal  bristles on the underside.

Captures loose hair and dander as you brush your pet. Flexible bristles self- clean in an instant.

Getting Started

Assembling Your Machine

Fit The Cleaner Head

Lay your machine on its back.

Slide your Motorbar™ cleaner head into position on the front of the ball. Push upwards until the red button on the underside of your machine clicks securely in place.

Stand your machine upright.

Fit The Wand

Slide the handle onto your machine until it clicks into position.

Position the wand into the end of the hose. Press the wand release button on the end of the hose and slide the wand all the way down.

Position the wand and hose in the handle recess on your machine. Slide the wand down into the handle until it clicks into position.

Close the wand end cap.

Fit The Tool Holder

Slide the tool holder into position on the side of your machine.

Fit your combination tool onto the holder.

Wrap the cable around the top and bottom cable hooks and secure with the cable clip.

**Caring For Your Floors

**

Check that the underside of the cleaner head or tool is clean and free from any objects that may cause damage.

Before vacuuming your flooring, rugs, and carpets, check the manufacturer’s recommended cleaning instructions.

The brush bar on your machine can damage certain flooring. Some rug materials may fuzz if a rotating brush bar is used when vacuuming. If this happens, we recommend vacuuming without the motorized floor tool and consulting with your flooring manufacturer.

Using Your Motorbar™ Cleaner Head

Your cleaner head has a motor-driven brush bar with suction control.

Check the manufacturer’s recommended cleaning instructions for your flooring type.

Slide the suction control to suit your floor type. Select the right cleaning mode for the right task.

Position the slider to the left for use on deep- to medium-pile carpets, delicate flooring and rugs.

Position the slider in the center for low-pile carpets and large debris.

Position the slider to the right for hard floors and ground in dirt.

If your machine is hard to push, use the mode on the left.

**Using Your Tools

**

Attach To The Wand

Open the cap on the handle and slide the wand upwards until both the wand and hose release from the machine.

Push the tool into the end of the wand.

Remove From The Wand

Remove the tool and slide the wand back into the hose. Position the wand and hose in the recess on the handle of your machine.

Attach To The Hose

Open the cap on the handle and slide the wand upwards until both the wand and hose release from the machine.

Press the button on the end of the hose to release the wand.

Fit the tool into the end of the hose.

Remove From The Hose

Remove the tool from the end of the hose.

Push the wand into the end of the hose until it clicks into position. Slide the wand down into the hose.

Close the wand end cap.

**Emptying Your Bin

**

Empty as soon as the dirt reaches the MAX level – don’t overfill. Using your machine when the dirt is above the MAX line may affect the performance and require more frequent filter washing.

Remove Your Bin

Turn off and unplug your machine.

Press the button on the bin handle to detach the bin from your machine.

Release The Dirt

Hold your bin, with the bin base pointing down, over your trash can.

Firmly push the button on the bin handle, until the bin base opens.

Minimize Dust Contact

Cover your bin tightly in a dustproof bag while you empty. Remove

your bin carefully, seal the bag tightly and dispose.

Replace Your Bin

Push the bin base up until it closes, clicking into place.

Position the bottom of your bin on your vacuum cleaner and then push the top into your machine until it clicks securely into place.

**Storing Your Machine

**

Carry your machine using the bin handle.

Push your handle into the upright position.

Push your handle firmly forward and listen for two clicks to lock in  upright position.

The stabilizer wheels will drop into position when the handle is locked  in the upright position.

Clearing Blockages

If any part of your machine becomes blocked, it may automatically cut out and the power will stop.

Unplug and leave your machine to cool before checking for blockages.

Remove Cleaner Head

Lay your machine on its back.

Push down the red button on the bottom of the ball and then slide your cleaner head down and off your machine.

Check The Wand

Open the cap on the handle and slide the wand upwards until both the wand and hose release from the machine.

Press the button on the end of the hose to release the wand.

Look through the wand to check for blockages.

Check The Hose

Open the cap on the handle and slide the wand upwards until both the wand and hose release from the machine.

Press the button on the end of the hose and remove the wand.

Press the button on the bin handle and remove the bin. Press the tab on the base of the hose to remove it from your machine.

Check for blockages in the hose, be careful of any sharp objects.

Check Airways For Blockages

Recline your machine and remove the outer cover of the ball.

Press the button on the handle of the bin and lift it away from your machine. Locate the clear inspection panel at the bottom of the bin recess on your machine and lift it to one side. Remove any debris.

Remove the cleaner head and look for blockages in the airway.

Check all the airways, removing any debris before reassembling your machine.

Clearing Obstructions From Your Motorbar™ Cleaner Head

Your Motorbar™ cleaner head doesn’t have a washable brush bar.  To maintain optimum performance, check your brush bar regularly and clear any obstructions.

Unplug and leave your machine to cool before checking for blockages.

Remove Cleaner Head

Lie your machine on its back.

Push down the red button on the bottom of the ball and then slide your cleaner head down and off your machine.

Remove Your Brush Bar

Press the button on the back of the Motorbar™ cleaner head and push upwards 90° to release the end cap.

Pull the brush bar out of the cleaner head.

Remove any hair, thread or debris from around the brush bar.

Be careful of any sharp objects when clearing blockages.

Replace Your Brush Bar

Push the brush bar firmly back into the cleaner head.

Make sure the brush bar is pushed fully into the cleaner head. Rotate the end cap until it clicks back into the locked position.

Reassemble The Cleaner Head

Slide your Motorbar™ cleaner head into position on the front of the ball. Push upwards until the red button on the underside of your machine clicks securely in place.

Washing Your Filters

Wash your filters at least once a month to maintain optimum suction power.

For more information and support videos for your machine go online: www.dyson.com/support

Washing Filter A

Remove your filter

Press the button on the bin handle to detach the bin from your machine.

Wash Your Filter

Push up the catch on the front of the bin handle and lift out the filter.

Only wash the filter with cold water. Hold the open end of the filter under a running tap, until the water runs clear.

Turn the filter upside down and tap to remove excess water.

Run water over the outside of the filter until the water runs clear.

Squeeze and twist with both hands to make sure the excess water is removed.

Dry Your Filter

Squeeze the excess water out of your filter.

Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.

Don’t dry your filter in a tumble dryer, microwave or near a naked flame.

Important: your filter must be completely dry before you put it back into the machine. Your machine could be damaged if used with a damp filter.

Reassemble Your Filter

Drop your filter back into your machine. Close the handle and make sure it clips into place.

Place the base of your bin onto your machine and then push the top into position until it clicks.

Washing Filter B

Remove Your Filter

Lay your machine on its side with the filter cover facing upwards.

Turn the lock in the center of the ball until the filter cover is released. Lift off the filter cover.

Twist the filter counter-clockwise until it is released and lift it off your machine.

Wash Your Filter

Wash the filter in a rotating motion.

Repeat until the water runs clear.

Tap the filter to remove excess water.

Dry Your Filter

Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.

Don’t dry your filter in a tumble dryer, microwave or near a naked flame.

Important: your filter must be completely dry before you put it back into the machine. Your machine could be damaged if used with a damp filter.

Reassemble Your Filter

Place the filter back into position in the ball.

Twist the filter clockwise until it clicks into position.

Refit the filter cover and turn the lock until it clicks securely into the closed position.

Looking After Your Machine

To always get the best performance from your machine, it’s important to clean it regularly and check for blockages.

Look After Your Machine

If your machine is dusty, wipe with a damp lint-free cloth.

Check for blockages in the cleaner head, tools, and main body of your machine.

Wash your filter regularly and leave it to dry completely.

Don’t use detergents or polishes to clean your machine.

Your Serial Number

You can find your serial number on your machine, behind the bin. Use your serial number to register your machine.

Frequently Asked Questions

Does the Ball Animal Corded Vacuum Cleaner have a HEPA filtration system?

Yes, the Ball Animal Corded Vacuum Cleaner is often equipped with a HEPA (High-Efficiency Particulate Air) filtration system. This system is designed to capture fine particles, allergens, and pet dander, helping to improve indoor air quality.

Is the Ball Animal Corded Vacuum Cleaner suitable for people with allergies?

Yes, the Ball Animal Corded Vacuum Cleaner with its HEPA filtration system is particularly suitable for people with allergies or sensitivities. The HEPA filter helps trap allergens, reducing the amount of airborne particles during the cleaning process.

What is the capacity of the dust collection bin in the Ball Animal Corded Vacuum Cleaner?

The capacity of the dust collection bin can vary depending on the specific model of the Ball Animal Corded Vacuum Cleaner. Typically, the bin can hold a decent amount of dirt and debris before needing to be emptied.

What is the Dyson UP13 Ball Animal Corded Vacuum Cleaner?

The Dyson UP13 Ball Animal is a powerful corded vacuum cleaner designed specifically for pet owners. It is designed to effectively remove pet hair and dander from various surfaces.

What are the key features of the Dyson UP13 Ball Animal Corded Vacuum Cleaner?

Some key features of the Dyson UP13 Ball Animal include powerful suction, a self-adjusting cleaner head, advanced Radial Root Cyclone technology, a HEPA filtration system, and a ball technology for easy maneuverability.

Can I use the Dyson UP13 Ball Animal on different floor types?

Yes, the Dyson UP13 Ball Animal is designed to be versatile and can be used on a variety of floor types including carpets, hardwood, tile, and laminate.

Does the Dyson UP13 Ball Animal Corded Vacuum Cleaner come with attachments?

Yes, the vacuum cleaner typically comes with several attachments and accessories, such as a combination tool, a stair tool, and a tangle-free turbine tool for removing pet hair from upholstery and furniture.

How do I empty the dustbin of the Dyson UP13 Ball Animal?

To empty the dustbin, press the release button on the vacuum cleaner's body, separate the bin from the main unit, and dispose of the contents into a waste bin. Avoid contact with dust and allergens during this process.

Is the Dyson UP13 Ball Animal suitable for allergy sufferers?

Yes, the Dyson UP13 Ball Animal features a HEPA filtration system that captures allergens and microscopic particles, making it suitable for allergy sufferers.

What is the cord length of the Dyson UP13 Ball Animal Corded Vacuum Cleaner?

The cord length of the Dyson UP13 Ball Animal is typically around 35 feet (10.7 meters), providing a good range for cleaning large areas without frequent unplugging.

How often should I clean or replace the filters in the Dyson UP13 Ball Animal?

The frequency of filter cleaning or replacement may vary depending on usage and environmental factors. It is generally recommended to clean the filters every 3-6 months or as needed, and replace them if they are damaged or no longer functioning effectively.

Can I adjust the suction power of the Dyson UP13 Ball Animal?

Yes, the Dyson UP13 Ball Animal typically offers adjustable suction power settings, allowing you to customize the level of suction based on the cleaning task and surface.

Does the Dyson UP13 Ball Animal come with a warranty?

Yes, Dyson typically provides a warranty for the UP13 Ball Animal Corded Vacuum Cleaner. The duration and terms of the warranty may vary, so it's important to check the specific warranty information provided by Dyson or consult the user manual.

Download this PDF Link:Dyson UP13 Ball Animal Corded Vacuum Cleaner User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>