ZEBRA ZT111 Entry Level Industrial Printer User Guide
- June 4, 2024
- ZEBRA
Table of Contents
- Install the Printer Driver
- Remove the Printer from the Box
- Connect the USB Cable
- Plug the Printer into an Electrical Outlet
- Turn on the Printer Power
- Open the Media Cover
- Release the Printhead Assembly
- Remove Damaged Labels
- Load Media
- Load Ribbon
- Support and information
- Prepare for Printing
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZT111
Quick Start Guide
Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA
zebra.com
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp.,
registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. © 2022 Zebra Technologies Corp. and/or
its affiliates. All rights reserved.
Install the Printer Driver
IMPORTANT
Go to zebra.com/zt111-info and install the
driver for your printer.
The driver MUST be installed before connecting the printer to the computer, or
it will cause complications. If your Microsoft Windows-based computer does not
have the driver installed for this printer, download it from
zebra.com/zt111-info and install it before continuing.
https://www.zebra.com/gb/en/support-downloads/printer-software/printer-setup-
utilities.html
Remove the Printer from the Box
Save the box and packaging materials in case you need to store or ship your printer in the future.
Connect the USB Cable
a – Remove the port blocker label.
b – Connect the USB cable to the printer and your computer.
Plug the Printer into an Electrical Outlet
Turn on the Printer Power
Open the Media Cover
Release the Printhead Assembly
Rotate the printhead latch (a) to release the printhead assembly (b).
Remove Damaged Labels
Remove and discard any dirty or torn labels.
Load Media
a – Fold down the media guide.
b – Hang the roll of media on the media hanger.
Watch the video
https://me-qr.com/VtKSub
Feed the media as shown:
a – Under the black media dancer
b – Inside the gap sensor
c – Under the inner media guide
Adjust the outer media guide until it almost touches the edge of the
media.
Load Ribbon
Place the ribbon on the ribbon supply spindle as shown. Push the roll back as far as it will go.
Place an empty core on the ribbon take-up spindle as shown.
Push the core back as far as it will go.
Feed the ribbon as shown.
Wrap the ribbon around the core several times, and then rotate the spindle to
tighten and align the ribbon.
Support and information
| View user documentation and how-to videos.
https://me-qr.com/RNuqy
---|---
| Need to design a label?
www.zebra.com/zebradesigner
| Learn about genuine Zebra supplies.
www.zebra.com/supplies
| Need to manage your printer?
zebra.com/profilemanager
| View Quick Answers and Knowledge Base.
www.zebra.com/knowledge
| Join Community Connection of Zebra users and ambassadors.
www.zebra.com/supportcommunity
| Contact Zebra about your printer.
www.zebra.com/contact
| Need to secure your printer?
www.zebra.com/printsecure
Prepare for Printing
Rotate the printhead lever down to close the printhead.
Press PAUSE
– The printer auto-calibrates and several labels feed.
– The ribbon tightens and aligns on the printhead.
Close the media cover.
References
- Zebra Support Community
- PrintSecure | Security Software | Zebra
- Printer Profile Manager Enterprise | Zebra
- Zebra Support Community
- ZT111 Industrial Printer Support & Downloads | Zebra
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>