Knightsbridge GU5KW Smart 5W LED RGB and CCT GU10 Lamp User Guide

June 4, 2024
Knightsbridge

GU5KW Smart 5W LED RGB and CCT GU10 Lamp
User Guide

| Download the
SmartKnight App
On Google Play (AndroidTM ) or App Store®  (Apple®).
Open the app, tap “Register” and follow the on-screen instructions
---|---
| Add Device
(2.4 Ghz only)
To add a device tap the “+” on top right corner, select the product category and follow the on-screen instructions
| Enjoy
Enjoy your connected product. For more in-depth instructions, please see section titled “Wi-Fi Control” in this leaflet

Setting up Voice Assistants

Knightsbridge GU5KW Smart 5W LED RGB and CCT GU10 Lamp - icon
4

Enable the “SmartKnight” skill in either voice assistant and follow the app instructions to control your device(s) with your voice.
Visit http://www.mlaccessories.co.uk for further assistance

INSTALLATION & MAINTENANCE MANUAL GU5KW/CL5KW/GLS9BCKW/GLS9ESKW

WI-FI CONTROL

We recommend enabling Bluetooth to facilitate faster pairing. Please note that due to the limitations of Bluetooth only one lamp can be added at a time. If more lamps are to be added to the app this must be done within the time the lamps are in pairing mode, which is approximately 2 minutes.

  • Download the SmartKnight app on Google Play or the App Store®
  • Once the app is downloaded, open the app and tap “Register” then follow the on-screen instructions
  • To add a lamp to the app, switch on the power to the lamp and tap “+” on the top right corner
  • Select “Lighting (Wi-Fi)”
  • If the light is flashing rapidly and Bluetooth is enabled, the app will prompt to add the lamp to the app and follow the on-screen instructions to do so. If the light is not  flashing, follow the on-screen instructions to reset it
  • Connect to the desired Wi-Fi network, tap “Confirm” and the app will start searching for devices. Please note only 2.4 GHz networks are supported and make sure your  device is connected to the same Wi-Fi network
  • After the light has been added successfully to the app, the lamp can be named and added to a room. After naming the lamp, tap “Done”

WARNING
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed.
GENERAL
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where suitable facilities exist.

WARRANTY

This product has a warranty of 2 years from the date of purchase. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations (857671). improper use. or removal of the batch code will invalidate the warranty. If this product should fail within its warranty period. it should be returned to the place of purchase for a free-of-charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve the right to alter product specification without prior notice.
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Google, Android, and Google Play are trademarks of Google LLC.

INTERNATIONAL CONTACT DETAILS

https://www.mlaccessories.co.uk/contact-usKnightsbridge GU5KW Smart 5W LED
RGB and CCT GU10 Lamp - icon 5

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Knightsbridge User Manuals

Related Manuals