SONY XS-680GS 16 x 20 cm 6 x 8 Inch 2 Way Coaxial Speakers Installation Guide
- June 15, 2024
- Sony
Table of Contents
SONY XS-680GS 16 x 20 cm 6 x 8 Inch 2 Way Coaxial Speakers
Product Information
Specifications
- Peak Power: 230 W
- RMS Power: 40 W
- Rated Power: 38 W
- Effective Frequency Range: 50-24,000 Hz
- Output Sound Pressure
- Impedance (Ohms): 4
- Woofer Type: Cone
- Woofer Diaphragm Material: Composite PP
- Woofer Surround Material: Foam Rubber
- Woofer Magnet Material: Ferrite
- Tweeter Type: Soft Dome
- Tweeter Diameter: 13/16 (2.0 cm)
- Tweeter Diaphragm Material: Silk
- Tweeter Magnet Material: Neodymium
- Weight: 700 g
- Speaker System Configuration: Coaxial, 2-way
- Size: 6 x 8 (16 x 20 cm)
Product Usage Instructions
Installation
- Choose a suitable location in your vehicle to install the speakers.
- Remove any existing speakers or grilles from the installation location.
- Connect the speaker wires to the corresponding terminals on the speakers. Ensure proper polarity (+/-) for each wire.
- Mount the speakers securely using the provided mounting hardware.
- Test the speakers to ensure they are functioning properly before finalizing the installation.
Speaker Positioning
For optimal sound quality, place the speakers in a location that provides
balanced coverage and minimizes reflections. Consider the following tips:
- Position the speakers at ear level for the best listening experience.
- Ensure that the speakers are securely mounted to reduce vibrations and rattling.
- Avoid placing the speakers too close to corners or walls, as this can cause excessive bass response.
- Experiment with speaker placement to find the position that produces the desired soundstage and imaging.
Frequently Asked Questions (FAQ)
- Q: What is the peak power of the XS-680GS speakers?
- A: The peak power of the XS-680GS speakers is 230 W.
- Q: What is the effective frequency range of these speakers?
- A: The effective frequency range of the XS-680GS speakers is 50-24,000 Hz.
- Q: What is the impedance of these speakers?
- A: The impedance of the XS-680GS speakers is 4 Ohms.
- Q: What is included in the package?
- A: The package includes the XS-680GS 2-way coaxial speakers and a warranty card.
- Q: What is the weight and size of these speakers?
- A: The XS-680GS speakers weigh 700 g and have a size of 6 x 8 inches (16 x 20 cm).
Bullets
- Composite polypropylene cone woofer
- Foam rubber surround
- Silk soft-dome tweeter
- Progressive height rate spider
- Dynamic Air Diffuser
- Easy installation
- Environment in mind
Features
-
Composite polypropylene cone woofer
Optimally designed polypropylene diaphragm gives deep bass while suppressed peaks and dips in the mid and high frequency smooth integration with the tweeter. -
Foam rubber surround
The woofer surround material is made of foam rubber, manufactured with an air- filled matrix structure that is light-weight and durable, providing optimal damping characteristics for responsive bass notes. -
Silk soft-dome tweeter
Based on technology developed for our premium speaker designs, the soft-dome tweeter boasts a flat frequency response and wider dispersion. In addition, its silk diaphragm contributes to natural and smooth sound with good internal loss. -
Progressive height rate spider
The acoustically optimized spider allows for higher power handling and airflow, with a profile designed for more rapid and precise cushioning of the speaker cone. -
Dynamic Air Diffuser
The integrated Dynamic Air Diffuser ensures efficient air circulation for smooth cone travel and cooling of the voice coil. -
Easy installation
The smaller tweeter chassis and shallow woofer basket decrease physical interference with factory grilles, enabling easy installation in a wider variety of vehicles. -
Environment in mind
Our products are not only designed to be stylish but also with the environment in mind. For the individual packaging of the XS-680GS, 98% of the cushions are made of paper materials, and compared to the prior model, printed information has been carefully considered for simplicity and length to reduce printer ink usage by approximately 90%, reflecting Sony’s commitment to reducing environmental impact.
Specification
General Features
| PEAK POWER | 230 W |
|---|---|
| RMS POWER | 40 W |
| RATED POWER | 38 W |
| EFFECTIVE FREQUENCY RANGE | **** |
50-24,000 Hz
OUTPUT SOUND PRESSURE| ****
89 dB ±2dB SPL (1W,1m)
IMPEDANCE (OHMS)| 4
Woofer
| TYPE | Cone |
|---|---|
| WOOFER DIAPHRAGM MATERIAL | **** |
Composite PP
WOOFER SURROUND MATERIAL| ****
Foam Rubber
WOOFER MAGNET MATERIAL| ****
Ferrite
Tweeter
| TYPE | Soft Dome |
|---|---|
| DIAMETER | 13/16″ (2.0 cm) |
| TWEETER DIAPHRAGM MATERIAL | **** |
Silk
TWEETER MAGNET MATERIAL| ****
Neodymium
Summary
| WHAT’S IN THE BOX | Warranty Card |
|---|
Size & Weight
| WEIGHT | 700 g |
|---|
Speaker System
| CONFIGURATION | Coaxial, 2-way |
|---|---|
| SIZE | 6 x 8″ (16 x 20 cm) |
©2023 Sony Electronics, Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony and the Sony logo are trademarks and or registered trademarks of Sony Corporation. Bluetooth and the Bluetooth logo are trademarks of Bluetooth SIG, Inc. All other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>