TEAM CORALLY C-00285 RTR Blue Brushless Power

INSTRUCTION MANUAL

Download the latest colour version of the manual from www.corally.com

INTRODUCTION

QUICK START GUIDE

• Thank you for purchasing a Team Corally car. This manual describes the instructions for using the model and the electronic components. You will also find some tips on how to  maintain your RC model so that you can enjoy it for years to come. You have purchased one of the most efficient models available on the market that has been designed by a team of professionals. You will also benefit from the best after-sales support. All Team Corally models guarantee a high quality of manufacture and performance that guarantees you a high satisfaction of use and services provided by the Team Corally. Always take the time to read the instructions carefully in order to follow all the procedures to use your RC model safely  for you and for other people and property in the area. This will allow you to take full advantage of all the performance of your RC model.
• Please also check the website www.corally.com/Downloads/ to check if you have the latest version of this instruction manual. (Version: see bottom cover of this manual)
• If you have any questions about the model and its components, you can send a message to info@corally.com
• We also recommend that you get help from an experienced model maker or your dealer.
• You will find all the references of the spare parts on the website www.corally.com
• TERM OF USE
• The user is responsible for the use of your model. The user assumes all risks associated with the use of the model. This model is not intended for use by children under 14 years of age without the supervision of a responsible adult who is familiar with the dangers of using a RC model. Team Corally / JSP Group Intl bvba, its manufacturers, distributors and resellers cannot control the use and load of the model and therefore cannot be held responsible for any damage to property and damage caused to persons resulting from the use of this product. You must accept these conditions and consider yourself fully responsible for the use of this product. If not, do not use this product.
• Due to the continuous development of our products, the exact specifications of the kit may vary. If you have a problem with your new kit, please contact the store where you purchased it, indicating the part number(s).
• Team Corally / JSP Group Intl bvba reserves the right to change any specification without notice. All rights reserved.

READ FIRST

QUICK START GUIDE
This owner’s manual is designed for use with your vehicle and contains the instructions you will need to operate and maintain your vehicle.

• We know you want to start driving immediately after unpacking, but it is very important that you take the time to read this manual carefully, even if you are an experienced R/C driver.
• Read carefully and follow all instructions in this manual. Failure to comply with the instructions will be considered as abuse and/or negligence which may result in the cancellation of the warranty.
• Your vehicle is designed to operate on uneven terrain. However, dust, sand, water and carpet fibres can get into your car’s workspaces and can damage your vehicle if they are not removed quickly. We do not guarantee any warranty on your vehicle against damage caused by external elements such as sand, dirt or water. Users are responsible for the maintenance and safe operation of this vehicle.
• This product is not a toy. It is not suitable for users under 14 years of age, unless they are supervised by adults.
• Never attempt to disassemble electronic components. These have been carefully calibrated at the factory.
• Only improve your car with parts made for your car. If you upgrade performance, replace the entire system (such as the motor, inverter, battery, etc.) so that all components are properly adapted. Any malfunction resulting from a custom modification will void your warranty.
• Before driving your vehicle, please read this manual in its entirety and examine your vehicle and radio control system for any defects.
• For better performance, some adjustments may be necessary.
• This vehicle requires a battery (included in the car or in the packaging). Make sure the vehicle’s battery is sufficiently charged before driving, otherwise you may lose control of the vehicle.
• The radio transmitter requires 4 AA batteries (not included)
• Always remove or disconnect the battery from the vehicle to the inverter when not in use.
• Please drive your car in a spacious place. Never drive your car on the street or in traffic. Public places are subject to specific legislation by country, city, municipality, please  comply with the legislation for the use of RC models in your region.
• This product is fully assembled in the factory. We accept no liability for damage and/or accidents resulting from custom modifications and/or malfunctions.

SAFETY PRECAUTIONS

• For your safety, always use wear gloves and goggles when assembling and maintaining your model.
• Always take all necessary precautions when handling products (silicone oil, grease, thread lock, cyanolyte glue, fuel) for the operation of the model. (Refer to the manufacturer’s instructions)
• For your safety, to keep the warranty and obtain the best performance, always use original CORALLY genuine parts.
• Contains: LEAD (CAS 7439-92-1) ANTIMONY (CAS 7440-36-0)
• WARNING: This product contains a chemical known to the state of California to cause cancer and birth defects or other reproductive harm.
• CAUTION: CANCER HAZARD
• Contains lead, a listed carcinogen. Lead is harmful if ingested. Wash thoroughly after using.
• DO NOT use product while eating, drinking or smoking.

USE PRECAUTIONS

Failure to operate your model in a safe and responsible manner may result in injury to yourself, others or damage to property around you.

• Do not use your model on public roads or in areas where you may encounter pedestrians or riders.
• Do not operate in a congested area or in crowds.
• Do not operate in areas where loud noises can disturb others, such as hospitals and residential areas.
• Do not operate your model with obstructed line of sight, at night or near water.
• Your model is radio controlled, it is subject to possible radio interference. Radio interference can cause loss of control of your model. Be careful.
• Take care not to injure yourself while using tools to adjust or upgrade your model.
• Since the model contains small parts, keep out of reach of children while assembling and/or disassembling your model.
• If your model becomes stuck against an object, release the throttle and retrieve it by hand
• Do not continue to apply the throttle when your model is stuck. This may damage the motor and/or ESC/Receiver unit.
• Turn OFF your model and don’t use it if it runs erratically. Please do not use your model again until the problem has been solved.
• Keep the wheels of the model off the ground when checking the operation of the radio equipment.
• When learning to operate your model, go to an area that has no obstacles that can damage your model.
• Before and after each use, check all the screws on the model.
• To maintain the best performance, check that all moving parts move freely.

Take all necessary precautions before, during and after using your model. You are responsible for the safe assembly, maintenance and use of your model.
In case of any questions, contact your local reseller or contact Team Corally support for assistance.

LIPO BATTERY SAFETY PRECAUTIONS

• Follow and respect the manufacturer’s instructions for use

• It is important to check that your ESC is set to LIPO if you are using a LIPO battery. Failure to comply with this instruction will result in increased battery dis-charge and may cause fire and damage to persons and property.

• When charging or storing LiPo batteries always use LiPo Safety Bag (Flame retardant).

• Always respect the maximum rate and voltage specified by the battery manufacturer.

• Charge the LIPO battery outdoors or in a ventilated area away from flammable objects and surfaces.

• NEVER leave your LiPo battery unattended while charging.

• If the battery swells during charging, stop charging immediately and disconnect the battery from the charger. Leave the battery outside for a few hours and observe. Then recycle the battery according to the instructions of your country/region. Never dispose of a LIPO battery with domestic waste.

• Before recycling your defective battery, it must be neutralized. Take a plastic container, fill it with water and add a lot of salt until the water becomes opaque. Place the LIPO battery in the water and leave for 24 hours. Check with a voltmeter that the voltage is 0.0V. Then recycle the battery according to local regula-tions.

• Never charge a damaged or inflated battery.

• Never discharge the battery cells below 3.2V.

• Always use the appropriate balancer/charger when charging your LiPo battery pack.

• When the battery is empty, check the temperature of the battery before charging it.
  If the battery is very hot, wait until it cools before charging it.

• Never charge a very hot battery as this may cause an explosion or fire.

• When the battery is empty, recharge it immediately. Do not store an empty battery, the battery will continue to discharge, it will fall below the minimum voltage and become  unusable.

WARRANTY

• If material defects or manufacturing faults should arise in a product distributed or manufactured by Team Corally / JSP Group Intl bvba, and purchased by a consumer, we Team Corally / JSP Group Intl bvba acknowledge the obligation to correct those faults or defects within the limitations described below. This manufacturers warranty is in addition to, and does not affect, the legal or contractual rights of the consumer which arise from the purchase of such products. Team Corally / JSP Group Intl bvba guarantees the consumer that its products are free from material, manufacturing, and construction faults, as determined by the general state of knowledge and technology valid at the time of manufacturing.
• The fault responsible for causing the damage must be proven to have been present in the product at this time. Claims for compensation arising from consequential damage or product liability will not be considered valid unless they fall under peremptory provisions of the law. If material defects or manufacturing faults should arise in a product distributed or manufactured by Team Corally / JSP Group Intl bvba in the European community (EC) and purchased by a consumer, then Team Corally / JSP Group Intl bvba undertakes to correct those defects within the limitations described below. This manufacturer’s declaration does not affect the consumer’s legal or contractual rights regarding defects arising from the purchase contract between the consumer and the dealer or reseller. Extend of the Warranty
• If a claim is made under warranty, we take at our discretion to repair or replace the defective goods. We will not consider supplementary claims, especially for reimbursement of costs relating to the defect (e;g. installation / removal costs) and compensation for consequent damages unless they are allowed by statute. This does not affect claims on legal regulations, especially according to the product liability law.

Provisions of the Warranty

• The purchaser is required to make the warranty claim in writing, and must enclose original proof of purchase (e.g. invoice, receipt, delivery note) and the appropriate warranty  card. He must send the defective goods to our local representatives or directly to Team Corally / JSP Group Intl bvba, Geelseweg 80, 2250 Olen, Belgium at his own risk and cost.
• The purchaser should state the material defect or manufacturing fault, or symptoms of the fault, as accurate as possible, so that we can check if our warranty obligation is applicable. The goods are transported from the consumer to us, and from us to the consumer, entirely at the risk and cost of the consumer.

Invalidation of the Warranty

• The consumer cannot make a claim under warranty when the fault is affecting the use of the product arising from natural wear, competition use, or improper use (including installation) or external forces. The consumer’s adherence to the building and operating instructions relevant to the model, including the installation, operation, use of, and maintenance of, model-related components cannot be supervised by Team Corally / JSP Group Intl bvba. Therefore Team Corally / JSP Group Intl bvba is in no way liable for loss, damage, or costs resulting from improper use, or behaviour in any way connected to the above described provisions. Unless otherwise required by law, Team Corally / JSP Group Intl bvba is in no way whatever liable to provide compensation for damages arising from the improper use of the model (including personal injury, death, damage to buildings, loss of turnover, loss of business, or interruption of business, or any other direct, or indirectly caused, consequential damage).

Duration of Validity

• The claim period is 24 months from the date of purchase of the product by the consumer from a dealer in the European Community (EC) counted from the date of purchase. The claim period is 12 months from the date of purchase of the product by the consumer from a dealer outside the European Community (EC) counted from the date of purchase. If a defect arises after the end of the claim period, or if evidence or documents required according to this declaration in order to make the claim valid are not presented until after this period, then the consumer forfeits any rights or claims from this declaration. The guarantee period is not prolonged by the granting of any claims within the framework of this warranty, especially in the case of repair or replacement. The guarantee period also does not restart in such cases.

Warranty Expiration

• If we do not acknowledge the validity of a claim based on this declaration within the claim period, all claims based on this declaration will expire after six months from the time of registering the claim; however this cannot occur prior to the end of the claim period.
• For any support, contact us at support.corally.com

TECHNICAL SPECIFICATIONS

KIT CONTENT (Depends on the selected colour)

• 2.4gHz 2-Channel
  Digital Remote Control System

• 1/8 Scale Brushless Powered XTREME BUGGY

• Instruction manual
  Colour version available on www.corally.com

• KURON 825

  • 4-Pole
  • 2050KV
  • 4-6S Sensorless Brushless Motor

• TOROX 185 Sensorless ESC

  • Waterproof
  • 150A Cont. Current
  • 2-6S LiPo
  • HV BEC
  • Programmable

• CR-HV 7225

  • HV Digital Servo
  • Torque 25kg/cm
  • Metal Gears

REQUIRED FOR OPERATION (Not included)

BATTERIES AND CHARGER

• LiPo Power Pack 4S min. capacity 5000mAh
• XT90 connector
• LiPo Power Pack 6S min. capacity 4500mAh
• XT90 connector
• 4 pcs AA-Size Dry Cells for the Transmitter –
• Battery Charger (LiPo)

FOR MAINTENANCE

• Hex Drivers 1.5 – 2.0 – 3.0mm-
• Nut Drivers : 5.5mm (M3 Nut) – 7.0mm (M4 Nut)
• Wheel Wrench 24mm
• Silicone Oil for Differentials ans Shocks
• Threadlock to secure screws
• Brush and Cloth for cleaning

C-16250

Team Corally – RC Car Tool Set Tool Bag with 16 pcs Tools

CAR COMPONENTS

QUICK START GUIDE

SPEED GEAR CHART

With Spur Gear 46T – Gear Ratio 3.31

• Note: The speed indicated in the table is a theoretical speed for information purposes. The real speed varies according to the type of terrain, electronic equipment, atmospheric conditions and other driving parameters.

MOTOR PINION MOD1.0

• You can choose a different pinion size to change the speed or acceleration. The car is equipped with a 13-tooth pinion from the factory, which is the best ratio of power to speed and battery life. Adapt the pinion to the type of terrain (off-road = small pinion, speed = large pinion). If the motor gets too hot or the controller shuts down (safety), the motor makes too much effort, reduce the pinion size.

M1.0 PINION – Hardened Steel – for 5mm diameter shaft

• High-performance pinions gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity and vibration-free operation. Each pinion is marked with the tooth number for easy and quick identification. Fits all cars with MOD1 gears (1/8 Scale)
• C-72711 – Pinion 11 Teeth
• C-72712 – Pinion 12 Teeth
• C-72713 – Pinion 13 Teeth
• C-72714 – Pinion 14 Teeth
• C-72715 – Pinion 15 Teeth
• C-72716 – Pinion 16 Teeth
• C-72717 – Pinion 17 Teeth

GEAR MESH ADJUSTMENT

• If the gear mesh is not correct, you wear out the spur gear prematurely, the transmission will make noise, give unnecessary load on the motor (higher consumption, heating of the transmission).

1. Loosen the screws.

2. Insert the paper strip.

3. Push the motor against the spur gear

4.  Turn the spur gear to run the paper through the teeth.
   Stop when the paper is in the middle.
   Make sure that the motor pinion is against the spur gear.

5. Maintain and tighten the fixing screws.

SHOCK ABSORBER MAINTENANCE
It may be necessary to replace the silicone oil in the shock absorbers every 40 runs (depends on how you drive and the type of terrain you drive on).

ALWAYS USE SILICONE OIL, NEVER USE ANY OTHER TYPES OF OIL

• Fill the shock with silicone oil.
• Move the piston up & down (3-4x) to release the air bubbles in the silicone oil.
• Pull the Shock shaft down and wait until the bubbles rise to the surface.
• Screw in the shock absorber cap at 50%.
• Gently move the piston  in upper position, the oil excess will flow out.

| FRONT| REAR|
---|---|---|---
SILICONE OIL| SPRING TENSION| SILICONE OIL| SPRING TENSION| SHOCK PISTON
TRACK USE| 450CPS| 4mm| 400CPS| 0mm| 4 Holes
OFF-ROAD| 600CPS| 4mm| 500CPS| 0mm| 4 Holes
FACTORY| 500CPS| | 500CPS| | 4 Holes

SHOCK ABSORBER

Do not overtighten the Shock Cap to prevent deformation of the silicone Shock Bladder.

• 00180-768 Shock Piston (8pcs)

• Shock Piston – 6 Holes 1.4

• Shock Piston – 8 Holes 1.2 (Factory installed)

• Place all small parts on a screwdriver (Ø3mm) and push them into the shock body. All parts will be properly aligned.

DIFFERENTIAL MAINTENANCE

• It may be necessary to replace the silicone oil every 50 runs (depends on how you drive and the type of terrain you drive on).
• To dismount and maintain the differentials, follow the steps on these pages. To reassemble the differentials, repeat the steps in reverse.

Use the correct grade of silicone oil according to the operation. Use only Silicone Oil, never use any other types of oil.

FRONT DIFFERENTIAL

REAR DIFFERENTIAL

CENTRE DIFFERENTIAL

FRONT & REAR DIFFERENTIAL

OPTION

• OPTION Aluminium 7075 Hard Anodisec Made in Italy
• For FRONT or REAR
• OPTION Aluminium 7075 Hard Anodisec Made in Italy For FRONT or REAR

CENTRE DIFFERENTIAL

FRONT DRIVE TRAIN

REAR DRIVE TRAIN

CHASSIS

CHASSIS  SCREWS DESCRIPTION

SERVO SAVER  SAUVE-SERVO

SPARE PARTS

• C-00180-004-1 Battery Strap – Hook & Loop – 2 pcs

• C-00180-005-2 Wing Mount – Adjustable – Composite – 1 Set

• C-00180-008 Hub – Rear – Composite – 1 pc

• C-00180-009-1 HD Steering Block (1pc) – Pillow Ball Cup (2pcs) – Composite

• C-00180-018 Centre Diff Bulkhead – Composite – 1 Set

• C-00180-023 Motor Mount Centre Diff Insert – Composite – 1 pc

• C-00180-032 Bumper – Front – Rear – Composite – 1 set

• C-00180-033 Gearbox Case Set – Composite – 1 Set

• C-00180-036 Steering Bellcrank – Parts A-B-C – Composite – 1 Set

• C-00180-055 Suspension Arm Shim – Composite – 1 Set

• C-00180-089 Anti-Roll Bar Ball Cups – Composite – 4 pcs

• C-00180-117 Pivot Ball Adjusting Nut – Aluminium – 4 pcs

• C-00180-122 Pin 2.5x17mm – Steel – 10 pcs

• C-00180-123-1 Pivot Ball – Steel – 4 pcs

• C-00180-127 Hinge Pin – Outer – Steel – 2 pcs

• C-00180-145 Servo Saver Shaft w/ Nut – Aluminium – 1 pc

• C-00180-147 Servo Saver Post – Steel – 2 pcs

• C-00180-148 Shock Screw – Steel – 4 pcs

• C-00180-149 Ball – 5.8mm – Steel – 4 pcs

• C-00180-150 Ball Shouldered – 6.8mm – Steel – 4 pcs

• C-00180-170 Ball – 6.8mm – Steel – 2 pcs

• C-00180-171 Threaded Ball – 6mm – Steel – 2 pcs

• C-00180-176 Motor Bulkhead – Aluminium – 1 pc

• C-00180-177 Motor Mount – Aluminium – 1 pc

• C-00180-195 Anti-Roll Bar – 2.6mm – Front – 1 pc

• C-00180-220 Ball End 5.8mm – for Anti Roll Bar – Steel – 4 pcs

• C-00180-226-B

• Wing – Composite – 1 pc

• C-00180-230 Wheel Nut – Aluminium – Ribbed – 4 pcs

• C-00180-231 Collar – for Anti-roll Bar – Aluminium – 1 pc

• C-00180-242 Side Guards – Left-Right – Composite – 1 Set

• C-00180-293 Ball 6.8mm – Steel – 4 pcs

• C-00180-321-4 Chassis – Buggy – Aluminium 3mm – Black – 1 pc

• C-00180-322 Suspension Arm Pivot Pin – Lower Inner – Fr/Re – Steel – 2 pcs

• C-00180-329 Wheel Hex Adapter – Wide RTR – Aluminium – 2 pcs

• C-00180-360 Universal Joint Drive Shaft – Buggy – Front – 1 pc

• C-00180-369-1 Dogbones – Short – Rear – Steel – 2 pcs

• C-00180-370-X PRO Drive Axle – Buggy – Rear – Swiss Spring Steel – 2 pcs

• C-00180-372 Servo Arm – Steering – Alu – 1 pc

• C-00180-531 HDA Suspension Arm Insert – Inner – Aluminium – Red – 2 pcs

• C-00180-535 Wing Washer – Large – Composite – 1 Pc

• C-00180-555-1 Steering Links – 77mm – Composite – 2 pcs

• C-00180-556-1 Camber Links Rear – 93mm – Composite – 2 pcs

• C-00180-615 Battery Tray – Large – Composite – 1 Pc

• C-00180-714 Drive Shaft – Centre – Rear – 110mm – Steel – 1 pc

• C-00180-715 Drive Shaft – Centre – Front- 85,5mm – Steel – 1 pc

• C-00180-811 Shock Tower – Buggy – 4mm – Aluminium – Front – 1 pc

• C-00180-812 Shock Tower – Buggy – 4mm – Aluminium – Rear – 1 pc

• C-00180-831 Steering Rack – Dual Stiffener – Aluminium – 1 Pc

• C-00180-934 Suspension Arm – Lower – Rear – Composite – 1 pc

• C-00180-935 Suspension Arm – Lower – Front – Composite – 1 pc

• C-00180-936 Suspension Arm – Upper – Front – Composite – 1 pc

• C-00180-965 Chassis Brace – Buggy – Rear – Composite – 1 pc

• C-00180-966 Chassis Brace – Buggy – Front – Composite – 1 pc

• C-00180-967 Body Post – Composite – 2 pcs

• C-00180-969 Center Diff Plate – Pinion Gear Cover – XB – Composite – 1 pc

• C-00180-970 Chassis Brace – Buggy – Alu-minium 3mm – 1 pc

• C-00180-973 Suspension Arm Mount – XB – Front – 4mm Aluminum – 1 set

• C-00180-975 Suspension Arm Mount – XB – Rear – 4mm Aluminum – 1 set

• C-00180-977 Suspension Arm Mount Covers – Front – Composite – 1 Set

• C-00180-979 Suspension Arm Mount Covers – Rear – Composite – 1 Set

• C-00180-997 Servo Mount – Receiver Box – Composite – 1 Set

• C-00180-1020 Servo Steering Link – Compos-ite – 1 pc

• C-00180-1040 HDA Susp. Arm Insert – Outer – Spacer 2.5mm – Alum – Red – 2 pcs

• C-54011 Speed Controller – TOROX 185 – Brushless – 2-6S

• C-52022 Digital Servo – CRHV-7225-MG – High Voltage – Metal Gear

• C-00180-1168 SPARK XB6 – Body – Clear – Buggy – 1 pc

• C-00180-1169-R Red – 1 pc C-00180-1169-B

• Blue – 1 pc C-00180-1169-G

• Green – 1 pc

• C-00180-1168-R  Red – 1 pc C-00180-1168-B

• Blue – 1 pc C-00180-1168-G

• Green – 1 pc

• C-00180-614 Body Clip Retainer w/ Body clip – Black – 6 pcs

• C-00180-611 Off-Road 1/8 Buggy Tires – Xprit – Low Profile – Rims – 1 pair

• C-54055 Brushless Motor – Kuron 825 – 4-Pole – 2050 KV – Sensorless

• C-72713 M1.0 Pinion – Hardened Steel – 13 Teeth – Shaft Dia. 5mm

• C-00180-770 HD Shock End – Short – Composite – 4 pcs

• C-00180-164 Shock Shaft – 66mm – Rear – Steel – 2 pcs

• C-00180-165 Shock Shaft – 55mm – Front – Steel – 2 pcs

• C-00180-768 Shock Piston Heavy Duty – 4mm thick – 1 Set

• C-00180-078 Shock Body Insert – Washer – Composite – 1 set

• C-00180-188 O-Ring – Silicone – 4x8mm – 5 pcs

• C-00180-189 Shock Bladders – Silicone – 4 pcs

• C-00180-190 Shock Washer – 2.5x6x0.5mm – Steel – 10 pcs

• C-00180-138 Shock Cap – Lower – Composite – 2 pcs

• C-00180-136

Shock Collar – Aluminium – Hard Anodised – 2 pcsC-00180-136 Shock Collar – Aluminium – Hard Anodised – 2 pcs

• C-00180-192
• O-Ring – Silicone – 16.2×19.8mm – 5 pcs
• C-00180-191 O-Ring – Silicone – 9x12mm – 5 pcs
• C-00180-135 Shock Body – Front – Aluminium – Hard Anodised – 1 pc
• C-00180-137 Shock Body – Rear – Aluminium – Hard Anodised – 1 pc
• C-00180-133 Shock Cap – Aluminium – Hard Anodised – 2 pcs
• C-00180-658 Shock Cap Cover – RTR – Com-posite – 2 pcs
• C-00180-029 Shock Spring Cup – Composite – 4 pcs
• C-00180-628 Shock Spring – Hard – 1.8mm – 75/77mm – 2 pcs
• C-00180-291 Shock Spring – Hard – 1.8mm – 84/86mm – 2 pcs
• C-3101-25-6 Steel Nylstop Nut M2.5 – Black Coated – 10 pcs

SPARE PARTS

• C-00180-090-1 Center Diff set – Case + diff internals – 1 set
• C-00180-156 Bevel Pinion 13T – Steel – 1 pc
• C-00180-178 Diff. Bevel Gear 43T – Steel – 1 pc
• C-00180-179 Planetary Diff. Gears – Steel – 1 Set
• C-00180-184 Gear Diff. Pin – Steel – 2 pcs

• C-00180-205 Diff. Outdrive Pin – 2×11,8mm – Steel – 4 pcs
• C-00180-098 Diff Case – FR-RE – Composite – 1 pc
• C-00180-182 O-Ring – Silicone – 5x8mm – 5 pcs
• C-00180-183 Diff. Gasket – 4 pcs
• C-00180-153-X PRO Diff. Outdrive Cup – Swiss Spring Steel – 2 pcs
• C-00180-155-X PRO Pinion Outdrive Cup – Swiss Spring Steel – 2 pcs
• C-00180-154-X PRO Centre Diff. Outdrive Cup – Swiss Spring Steel – 2 pcs
• C-00180-686 Diff Case – Centre – Aluminium. – 1 pc
• C-00180-091 Spur Gear 46T – Steel – 1 pc
• C-00180-179 Planetary Diff. Gears – Steel – 1 Set
• C-00180-684 Gear Diff Pin – 3.5×29.8mm – for C-00180-686 – Steel – 4 pcs
• C-00180-183-1 Central Diff. Gasket – 4 pcs
• C-00180-182 O-Ring – Silicone – 5x8mm – 5 pcs

OPTION PARTS

• C-00180-626 Shock Spring – Soft – 1.4mm – 75/77mm – 2 pcs
• C-00180-627 Shock Spring – Medium – 1.6mm – 75/77mm – 2 pcs
• C-00180-289 Shock Spring – Soft – 1.4mm – 84/86mm – 2 pcs
• C-00180-290 Shock Spring – Medium – 1.6mm – 84/86mm – 2 pcs
• C-00180-410 Xtreme Diff Case – 30mm – FR / RE – Made in Italy – 1 pc

Anti-Roll Bar – Front – Rear

Front

• C-00180-199
• – 2.0mm C-00180-198
• – 2.2mm C-00180-197
• – 2.4mm C-00180-196
• – 2.5mm C-00180-195
• – 2.6mm

Rear

• C-00180-200
• – 2.4mm C-00180-201
• – 2.6mm C-00180-202
• – 2.8mm C-00180-203
• – 3.0mm

C-00180-376
Off-Road 1/8 Buggy Tires – Glued on Black Rims – 1 pair

• M1.0 Pinion – Hardened Steel – Shaft Diameter 5mm
• C-72713
• 13 Teeth (factory) C-72715
• 15 Teeth
• C-72717
• 17 Teeth

C-00180-1017
Motor Wire Holder – Composite – 1 Set

STEEL SCREWS

DECLARATION OF CONFORMITY

• (in accordance with ISO/IEC 17050-1)
  Description : SPARK XB6 – BUGGY 4WD – 1/8 -RTR

• Item Number: C-00285

• This declaration is issued under the sole responsibility of the manufacturer.

• Product(s)
  The object of declaration described above is in conformity with the relevant Union harmonization Legislation, specifically the requirements of the specifications listed below, following the provisions of the European RED Directive 2014/53/EU:

  • EN 300 440 V2.1.1:2017
  • EN 301 489-3 V1.6.1:2013
  • EN 301 489-1 V2.1.1:2017
  • EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
  • EN 62479:2010
  • EN 55024:2010+A1:2015
  • EN 55032:2015
  • EN 61000-3-3:2013
  • EN 61000-3-2:2014

• JSP GROUP INTL

  • Geelseweg, 80
  •  2250 Olen
  • Belgium

• Signed for and on behalf of

• Place and Date Data : Olen, Belgium, 09 June 2023

• Name: Stefan Engelen Signature=

• Title : Ceo

FEDERAL COMMUNICATIONS COMMISSION

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE JSP GROUP INTL BVBA / CORALLY, and is VALID ONLY for the equipment identified hereon for use under the Commission’s Rules and Regulations listed below.

• FCC IDENTIFIER : 2ASFS-C59060
• Name of Grantee : JSP GROUP INTL BVBA / CORALLY
• Equipment Class : Part 15 Low Power Communication Device Transmitter
• Notes : Corally CT2R – C-59060
• FCC Rules : 15C
• Frequency Range (MHZ) : 2410.0 – 2480.0

DISCOVER THE HIGH QUALITY TEAM CORALLY PRODUCTS

Discover all these products and more on the website www.corally.com  Website www.corally.com

This manual is an edition of Corally, a division of JSP GROUP INTL nv, Geelseweg 80, B-2250 Olen, Belgium. This manual is protected by a copyright and nothing from this edition may be reproduced or used without any prior written authorisation. Whilst every effort has been made to ensure the accuracy of the information in this manual, errors creep in and Corally can accept no responsibility for failures, wrong specifications, accuracy of colours, losses or damages caused. Corally denies any responsibility claims or damages caused by use of our products. Corally is not responsible for product / parts / specifications / Colour changes or availability of these products.

WWW.CORALLY.COM Team Corally Is a registered trademark license to JSP Group Intl bvba

• Geelseweg 80
• 8-2250 OLEN
• Belglum Tel: +32 14 25 92 94
• Info@corally.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>