tuya 80×60 WiFi Smart Home Sensors User Manual
- June 10, 2024
- Tuya
Table of Contents
tuya 80×60 WiFi Smart Home Sensors User Manual
LIGHT SWTICH INSTRUCTION
Thanks for
Choosing our WiFi Smart Home Sensors
Product Configuration
Specifications
Rated Voltage: AC 85-250V, 50/60Hz Max Current:1 outputs – Max 5A*1 Wireless Type: 2.4GHz
Wireless Standard: IEEE 802.11b/g/n Wireless Distance: 40m (max)
Operate Temper: 0°C～40°C (32°F～104°F)
Operating Humidity: 20%～85% non-condensing Storage Temper: 0°C～60°C (32°F -140°F)
Storage Humidity: 0%～90% non-condensing
Product Type: EU- 1 / 2 / 3 Gang;US- 1 / 2 / 3 Gang Product Size:86mm(L) x 86mm(W) x 34mm(H) Support: Amazon Alexa, Google Assistant
LED State
| Device Status | LED State |
|---|---|
| Smart Wi-Fi | Indicator flashes quickly |
| AP mode | Indicator flashes slowly |
| Triggered | LED will rapidly blink,and OFF |
after scheduled time
Sleeping mode| Indicator OFF
Reset
| Indicator lights up for 4s and after 2 seconds lights off, device goes
into configuration mode
How to reset?
- Press the reset button for 6 seconds till the indicator flash Then device turns to smart wifi mode.
Press the reset button again for 6 seconds till the indicator flash slowly.
The device turns to AP mode
Get Started with Tuya Smart App
- Download APP
Download the “Smart life” app from APP Store or Google Play to your mobile .
- Register and Login
Launch the “Smart life” app.
To register,enter your mobile phone number or email address,create a password
,then login to the app.
Login if you have an account already.
- Add Device
Power on the smart sensor which default’s mode is
Smart WiFi mode .
Select the “ + ” symbol on the top right-hand corner . Select your
product type and follow the instructions of the app.
If the connecting fails,try using AP Mode
On the “ Add device ” page select “ AP Mode ” on the top right-hand
corner and follow the instructions of the app. Finally,have fun!
What’s the App User Interface Like ?
Experience Advanced Features
You can experience the various advanced features of the product with the app, just try and do it yourself.
Main fuction
Working status: on/off: press one button only, the button in the app will turn
to green when it is ON; All on or All off: press the “All open” or “All close”
Timing switch, can be timed single or Multiple switch, and can set repeat
cycle (30s delay)
Linkage alarm setting
To connect two Sensors via scene setting.
Device sharing
Allow others to control the device
Push notification
Open / close push notification
Remove device
Restore default settings; Delete and add the device again to clear the record by APP.
Make Your Home Smarter
Read More About This Manual & Download PDF: