Solo Stove mesa XL Tabletop Fire Pit User Guide

: June 10, 2024
: solo stove

Table of Contents

**WHAT’S INCLUDED
GETTING STARTED
LIGHTING WOOD:
LIGHTING PELLETS:
ACCESSORIES
Fire up s’mores night, ANY NIGHT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Solo Stove mesa XL Tabletop Fire Pit User Guide

Must read before use. Failure to do so can result in serious injury or death.

SCAN HERE

https://eu.solostove.com/getting-started

WARNING! FOR OUTDOOR USE ONLY!

USER WARNINGS Do Not use until you have read the operating instructions and user warnings. Serious injury, and /or property damage may occur

The Mesa XL fire pit (“Mesa XL:”) is for outdoor use only. Do NOT use inside any enclosed area or under overhanging structures or trees.
Do not use Mesa XL for indoor heating. Toxic carbon monoxide can accumulate and cause asphyxiation and possibly death.
CHILD SAFETY HAZARD. This product is not intended for use by children. Adult use only. Mesa XL is not a toy. Exercise the same caution you would with an open fire.
Mesa XL will be extremely hot when in use. Never attempt to touch or move Mesa XL during use or before it has completely cooled down. Any direct contact may lead to serious injury whether accidental or otherwise. Do not lean any objects against Mesa XL.
Mesa XL must always be used with its included stand, especially when placed directly on wood, grass, PVC, or composite materials.
Exercise extreme caution when using Mesa XL on or around combustible surfaces. Use on wood, plastic, composite, or other combustible surfaces is at your own risk and can lead to charring or ignition if not adequately elevated, insulated, or misused. Even when using the stand, wood and other combustible materials differ significantly in quality and have varying heat resistance ratings. Further elevate or insulate Mesa XL if needed to avoid potential damage.
Do not use gasoline, lighter fluid, or other flammable liquid to light or relight Mesa XL. Doing so can lead to serious injury or property damage, in particular if the flammable liquid pools in the bottom of the fire pit.
Never leave Mesa XL unattended while in use, hot or while cooling off, especially if used near combustible surfaces.
Do not leave on combustible surfaces overnight after use even if you believe it has cooled off.
Be aware of potential damage to people and property from embers.
Mesa XL is designed for use with natural fuel sources (wood, pellets) and may not function properly with other fuel sources.
Do not alter or modify Mesa XL in any manner.
Do not store or use gasoline or any other flammable vapors or liquids in the vicinity of Mesa XL.
Do not wear flammable or loose clothing when operating Mesa XL.
Do not use Mesa XL in windy conditions.
Keep all electrical cables away from Mesa XL.
Do not lean over Mesa XL when lighting or when they are in use.
After a period of non-use, check your Mesa XL for signs of damage and creosote build-up. Do not operate until the necessary repairs and/or clean-up is done
Do not use water to extinguish the fire as this could cause damage to the Mesa XL as well as injury to the user.
Dispose of ashes properly, in an ash-safe metal bin. Ashes can
maintain heat and combustion can occur even after several hours.
Serious injury, death and/or property damage may occur if the above instructions are not followed exactly. User assumes all responsibility for safety

**WHAT’S INCLUDED

**

GETTING STARTED

Read all instructions and warnings prior to use.
Unfold the stand legs until they lock into place
. Place the stand on a level surface with the black feet facing down. Make sure you are always using the stand whenever you light Mesa XL to reduce risk of damage to your surfaces.
Place Mesa XL in the center of the stand
Place Mesa XL’s flame ring on top, facing up. This will direct your flame upwards for the best secondary burn.
Light it up! Use Mesa XL with your choice of pellets, sticks, chunk wood,or kindling

LIGHTING WOOD:

Place your fire starter in the middle of Mesa XL’s burn chamber.
Start adding sticks, chunk wood, or kindling slowly. As your pieces of wood catch fire, add more as needed. (fig. 2)
Use a long lighter to light the fire starter. (fig. 1)
Never stack wood higher than Mesa XL’s interior vent holes. Doing so willcut off airflow, and will cause your fire to smoke. Make sure wood is resting under the holes, and that they are clearly visible after fueling. (fig. 3)
Fuel your fire as often as you need to keep Mesa XL’s flame burning bright all night!

LIGHTING PELLETS:

Add pellets to the burn chamber until they are resting right below Mesa XL’s interior vent holes. Never add pellets higher than Mesa XL’s interior vent holes. Doing so will cut off airflow and cause your fire to smoke. (fig. 4)
. Place a fire starter on top and in the center of the pellets. (fig. 5)
Use a long lighter to light the fire starter. (fig. 6)
Allow the fire starter to ignite the pellets. Add small amounts of pellets as needed. NOTE: Adding too many pellets all at once can choke your fire, which can cause it to smoke. Be sure to add small amounts (approx. 1/4 cup) at a time.