FRIGIDAIRE FHWH084WB1 Window Air Conditioner User Guide
- June 10, 2024
- Frigidaire
Table of Contents
FRIGIDAIRE FHWH084WB1 Window Air Conditioner
Product Information
Room Air Conditioner
The Room Air Conditioner is a cooling device that can be easily installed in any room. The unit comes with an installation manual that must be followed during installation, and the RESET button on the Current Device must always be pressed when plugging in the unit.
The unit has a control panel with various buttons for setting the timer, changing the mode, adjusting fan speed, activating the child lock, and more. It also has an Eco mode that turns off cooling once the set temperature is reached, and a PureAirTM Premium Allergen Filter (sold separately) that captures household dust, dust mite debris, pet hair, dander, smoke, and other fine particles.
Product Usage Instructions
- Installation: Follow the supplied installation instructions carefully. Press the RESET button on the Current Device when plugging in the unit.
- To Get Started: Press the On/Off button to start the unit in Eco mode with auto temperature setting. Press – or + button to adjust the temperature.
- To Change Mode: Press the Mode button to choose the desired mode.
- To Clean the Dust Filter: After 250 hours of use, the Dust Filter light will illuminate to remind you to clean dust filter. Press and hold the Fan button for 5 seconds to turn off the light.
- To Activate Child Lock: Press and hold the Mode button for 3 seconds to activate the Child Lock state. In this state, the control panel will be locked. Press the Mode button for another 3 seconds to deactivate.
- To Set Timer: Press the Timer button and enter up to 24 hours for automatic turn on or shut off. When unit is On, the value entered is the time that the unit will shut off. When unit is Off, the value entered is the time that the unit will turn on. Press and hold the Timer button for 2 seconds to cancel the timer setting.
- To Change Temperature Unit: Press and hold the – and + buttons together for 3 seconds to change the display temperature unit.
- To Adjust Fan Speed: Press Fan button to increase fan speed. You may also select Auto Fan, which will speed up or slow down fan speeds automatically based on significant changes in room temperature.
- To Go to Sleep: Press the Sleep button to set the temperature at an elevated level for 7 hours.
Before you start
- Only install unit according to the supplied Installation Instructions.
- When plugging unit in, always press the RESET button on the Current Device.
You’re in control
To Get Started
- Press On/Off button. That’s it!
- The unit is programmed to start in Eco mode, with auto fan speed and a temperature setting of 72°F. To change the temperature setting press – or + button.
- In Eco mode (Energy Saver mode), cooling will turn off once the set temperature is reached. Every 10 minutes fan will run so room temperature can be sensed.
To Change Mode
- Press Mode button to choose the desired mode.
To Adjust Fan Speed
- Press Fan button to increase fan speed.
- You may also select Auto Fan, which will speed up or slow down fan speeds automatically based on significant changes in room temperature.
To Go to Sleep
- Press the sleep button. Temperature increases 4°F or 2°C over 1 hour and then holds this elevated setting for 7 hours.
To Activate Child Lock
- Press and hold the Mode button for 3 seconds. In the Child Lock state, the control panel will be locked. Press the Mode button for another 3 seconds to deactivate.
To Set the Timer
- Press the Timer button. Then enter up to 24 hours for automatic turn on or shut off.
- When unit is On, the value entered is the time that the unit will shut off. When unit is Off, the value entered is the time that the unit will turn on.
- Press and hold the Timer button for 2 seconds to cancel the timer setting.
To Change Temperature Unit
- Press and hold the – and + buttons together for 3 seconds to change the display temperature unit between °F and °C.
To Clean the Dust Filter
- After 250 hours of use the Dust Filter light will illuminate to remind you to clean dust filter.
- Press and hold the “Fan” button 5 seconds and the light will go off.
PureAirTM Premium Allergen Filter (sold separately)
- If the PureAirTM Premium Allergen Filter is installed, the PureAirTM Filter light will illuminate white.
- After 1440 hours of use the light will illuminate red to remind you to replace a new Filter. Press the Sleep button for 5 seconds to reset light.
More Information
Upgrade your AC with a PureAirTM Premium Allergen Filter
- Your air conditioner has a reserved space for PureAirTM Premium Allergen Filter (sold separately).
- Enjoy fresher room air with the PureAirTM Filter that captures household dust, dust mite debris, pet hair, dander, smoke, and other fine particles.
scan to learn more!
Remember
- Your Use & Care Guide has complete descriptions of all these features and more.
- Please read it carefully and keep in a safe place.
We are here for you
- Have a question?
- Want help?
- Need service?
Scan the QR Code
- Scan the QR Code to the right or visit frigidaire.com frigidaire.ca for owner support
16122000A73821
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>