Kommander KA02 Stainless Steel 200W In 2U Rack Amplifier User Guide
- June 10, 2024
- Kommander
Table of Contents
Kommander KA02 Stainless Steel 200W In 2U Rack Amplifier
Product Information
The Kommander-KA02 is an amplifier unit that can be mounted on any surface with any orientation. It comes with a K-BRK assembly mounting kit that includes screws and a bracket for easy installation. The unit has lateral screws positioned at the center for easy access to its internal components.
The following are the dimensions of the mounting kit:
- Distance between two holes: 70mm (2.8in)
- Torx T10 screw size
- Plate dimensions: 16mm (0.6in) x 32mm (1.3in)
- K-BRK bracket dimensions: 140mm (5.5in) x 18mm (0.7in)
Product Usage Instructions
- Identify a comfortable position for the amplifier on the mounting surface and make two holes at a distance of 70 mm (2.8 in) to each other.
- Install the K-BRK bracket on the surface using the provided mounting kit.
- Focus on the Kommander-KA02 unit and unscrew the lateral screws positioned at the center of the unit.
- Remove the plates from the bottom of the amplifier and keep the screws aside for further use.
- Position the amplifier unit on the bracket and use the screws to secure it.
Note : Use Torx T10 screwdriver to unscrew and secure the screws.
Mounting Kits
The Kommander-KA02 amplifier is designed to be controlled remotely, with no need of direct access the unit. This makes the devices easy to install, either in a recess or on top of a shelf or inside of a rack cabinet.
Two mounting kit are available:
- K-BRK bracketing system for single KA02 unit
- K-RACK2 rack mount 1U for three KA02 units.
K-BRK Assembly
- The Kommander-KA02 amplifier unit can be mounted on any surface with any orientation. Identify a comfortable position for the amplifier on the mounting surface and make two holes at the distance of 70 mm (2.8 in) to each other. Install the K-BRK bracket on the surface with the provided mounting kit.
- Focus on the Kommander-KA02 unit: unscrew the lateral screws positioned at the center of the unit and remove the plates from the bottom of the amplifier. Keep the screws aside for further use
- Position the amplifier unit on the bracket and use the screws to secure it.
Read User Manual Online (PDF format)
Loading......