NATIONAL INSTRUMENTS FP-1000 Network Interface User Guide
- June 10, 2024
- NATIONAL INSTRUMENTS
Table of Contents
FP-1000 Network Interface
User Guide
NOTE TO USERS
FP-1000 Network Interface
UPDATING YOUR FIRMWARE AND SOFTWARE FOR USE WITH THE FP-CTR-500 AND FP-PWM-520
To use the FP-CTR-500 counter module or FP-PWM-520 pulse-width-modulated
output module with a Field Point FP-1000 or FP-1001 network module, the
network module must have a firmware revision of 20 or greater. Network modules
of revision letter D or greater are shipped with a firmware revision of 20 or
greater. The revision letter of the network module is printed on the bottom of
the module—it is the letter in the part number. For example, a revision D
FP-1000 has a part number of 184120D-01, while a revision C has a part number
of 184120C-01.
You can also determine the firmware revision using the Field Point Explorer
program by typing Revision as the device name for a network module in the
Device Configuration window. The current firmware revision number of the
network module is displayed.
If you have a network module that does not have a firmware revision of at
least 20, you must upgrade the firmware of the network module to use it with
the FP-CTR-500 or FP-PWM-520. National Instruments supplies an update utility,
Pupate, to update the firmware to the latest version. You can download the
utility from this National Instruments FTP site:
ftp.natinst.com/support/fieldpoint/Update
In addition, if you are using the Field Point Explorer or Field Point Server
with the FP-CTR-500, you need version 1.7 or later of the software. Version
1.7 of the software is also recommended for the FP-PWM-520. The latest
released versions of these programs are shipped with the Field Point Software
and Documentation Kit (National Instruments part number 777520-01) or may be
downloaded from this FPT site:
ftp.natinst.com/support/fieldpoint/Server
Beta versions of these programs may also be available for downloading from
this FTP site:
ftp.natinst.com/support/fieldpoint/Beta
COMPREHENSIVE SERVICES
We offer competitive repair and calibration services, as well as easily accessible documentation and free downloadable resources.
SELL YOUR SURPLUS
We buy new, used, decommissioned, and surplus parts from every NI series. We
work out the best solution to suit your individual needs. Sell For Cash Get
Credit , Receive a Trade-In Deal
OBSOLETE NI HARDWARE IN STOCK & READY TO SHIP
We stock New, New Surplus, Refurbished, and Reconditioned NI Hardware.
Request a Quote FP-1000
Bridging the gap between the manufacturer and your legacy test system.
0 1-800-915-6216
www.apexwaves.com
sales@apexwaves.com ,
All trademarks, brands, and brand names are the property of their respective
owners.
Field Point ™ is a trademark of National Instruments Corporation. Product and
company
names mentioned herein are trademarks or trade names of
their respective companies.
322312A-01
© Copyright 1998 National Instruments Corp. All rights reserved.
December 1998
References
- Test and Measurement Systems, a part of Emerson - NI
- FP-1000 National Instruments Network Interface | Apex Waves
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>