Globe Electric 91002296 Bowie 1-Light Galvanized Steel LED Integrated Outdoor Wall Lantern Sconce Instruction Manual
- June 10, 2024
- Globe Electric
Table of Contents
Globe Electric 91002296 Bowie 1-Light Galvanized Steel LED Integrated
Outdoor Wall Lantern Sconce
Product Information
The Globe electric product is a lighting solution for homes that offers high- quality lighting with a level of service unparalleled in the industry. The product complies with part 15 of the FCC rules and is subject to specific conditions that ensure it does not cause harmful interference and accepts any interference received, including interference that may cause undesired operation. The product comes with a cleaning guide and safety instructions that must be followed for safe and proper functioning.
Product Usage Instructions
To ensure the safe and proper functioning of the Globe electric product, users must follow the instructions below:
- Consult a qualified electrician to ensure correct branch circuit conductor before installing the product.
- Place the wall switch to the OFF position before installation.
- Depending on which type of fuse box you have in your home, place either the main (Master) switch to the OFF position, cutting off power to your entire home or turn off the individual switch that provides power to where the fixture will be installed.
- Clean the lamp with a soft, damp cloth after turning off the switch or power source.
- Caulk completely around the area where the canopy meets the wall surface with silicone caulking compound to prevent water from seeping into the outlet box.
If you encounter any difficulties, have any questions or wish to offer feedback, you may contact Globe Electric through their toll-free telephone, fax, email, or mail. Please visit their website for other quality products.
Thank you for selecting Globe as your lighting choice for your home. With proper care, this product will provide years of pleasure and enjoyment. Carefully follow the instructions in order to ensure that this product functions safely and properly for years to come.
LED OUTDOOR WALL SCONCE
FOR YOUR SAFETY:
Most electrical accidents are caused by carelessness or ignorance. If you
combine a basic knowledge of electricity, a healthy respect for it, and a dose
of common sense, you can safely tackle many household electrical repairs. Here
are some basic guidelines for working with
electricity:
Before working on a circuit, go to the main service panel and remove the fuse
or trip the breaker that controls that circuit. Tape a sign to the panel
warning others to leave the circuit alone while you work.
Before touching any wire, use a voltage tester to make sure it’s not live.
Whenever you check for voltage in a receptacle, check both outlets – each may
be controlled by a separate wiring circuit.
When replacing fuses, turn off the main power first. Make sure your hands and
feet are dry, and place one hand behind your back to prevent electricity from
making a complete circuit through your chest. Touch a plug fuse only by its
insulated rim. Remove cartridge fuses with a fuse puller.
Use tools with insulated handles and ladders made of wood or fiberglass. Keep
dry-chemical fire extinguishers in the kitchen, basement, and workshop. Never
disable grounding devices. Make sure that all appliances requiring grounding
are properly grounded, and that the electrical system itself is properly
grounded.
Meet or exceed all electrical code requirements that cover the work you are
doing.
Always work with enough light to see what you are doing; it’s easy to make
mistakes when you’re working in dim light.
When in doubt about the safety of any electrical repair or test, call in a
professional.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the partyresponsible forcompliance couldvoid the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occurin a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception,which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one ormore of the followingmeasures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receivers connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RESPONSIBLE PARTY
Globe Electric
2264 East 6th Street
San Bernardino, CA 92410
www.globe-electric.com
Since 1932, Globe has taken pride in offering products of the highest quality,
and a level of service unparalleled in the industry.
Should you encounter any difficulties, have any questions or simply wish to
offer us your valuable feedback, you may contact us in the following ways:
Toll Free Telephone: 1-888-543-1388
(North America Only) /Toll Free
Fax:1-800-668-4562
(North America Only)
E-Mail: info@globe-electric.com / Mail:
Globe Electric Customer Service Department
150 Oneida, Montreal, Quebec, Canada H9R 1A8 Please visit our website to
discover other quality Globe products: http://www.globe-electric.com
INSTRUCTIONS
ELECTRICAL INSTALLATION
- FIG. 1. Place the wall switch to the “OFF” position. Depending on which type of fuse box you have in your home:
- FIG. 2. Place either the main (Master) switch to the “OFF” position, cutting off power to your entire home OR turn off the individual switch that provides power to where the fixture will be installed. OR
- FIG. 3. Place either the main (Master) switch to the “OFF” position, cutting off power to the entire home OR unscrew the fuse that provides power to where the fixture will be installed.
FIG. 1
WALL SWITCH
FIG. 2
BREAKER PANEL
FIG. 3
FUSE BOX
Cleaning: Before cleaning your lamp, turn off the switch or power source. Wipe the lamp with a soft, damp cloth.
CAUTION: Caulk completely around the area where canopy meets the wall surface with silicone caulking compound to prevent water from seeping into the outlet box.
LED OUTDOOR WALL SCONCE Integrated 10 watt LED
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>