Globe Electric SMART OUTDOOR STRING LIGHT Instruction Manual
- June 5, 2024
- Globe Electric
Table of Contents
Globe Electric SMART OUTDOOR STRING LIGHT Instruction Manual
Thank you for selecting Globe as your smart home solution. With proper care, this product will provide years of pleasure and enjoyment.
SMART OUTDOOR STRING LIGHT
Check out the installation video on our website: globe-
electric.comismart
SAVE THESE INSTRUCTIONS
CAUTION IMPORTANT SAFETY INSTRUCTIONS
CAUTION: This device is warranted to last 2 years from the date of purchase. If it fails before that time, we will replace it. Send Globe Electric the device, proof of purchase and register receipt along with your complete name and address. See caution text for proper use. This warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential damage is expressly excluded. For use only in 120V/60HZ circuits. Risk of electrical shock. Do not open, no user-serviceable parts inside. This device is not intended for use with emergency exit fixtures or emergency exit lights, photocells and electronic timers. Minimum operating temperature is -20°C (-4°F). This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY INSTRUCTIONS: When using electrical products, basic precautions should always be practiced including the following:
-
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
-
Read and follow all instructions that are on the product or provided with the product.
-
For a cord-connected or direct plug-in power unit, do not use an extension cord.
-
Reference the National Electrical Code, NFPA 70, specifically for the installation of wiring and clearances from power and lighting conductors.
-
Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
-
For a cord-connected or direct plug-in power unit, do not install or use within 10 feet of a pool.
-
For a cord-connected or direct plug-in unit, do not use in a bathroom.
-
For a direct plug-in or cord-connected power unit marked in accordance with 65.2:
WARNING: Risk of Electric Shock When used outdoors, install only to a covered Class A GFCI protected receptable that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord do not interfere with completely closing the receptacle cover. -
For a permanently connected power unit mked in accordance with 65.2:
WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCL -
WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician.
-
For a unit intended to be mounted greater than 0.30m (1 foot) from the ground surface:
WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface.
SAVE THESE INSTRUCTIONS – This manual contains important safety and
operating instructions for power units.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator and your body.
USER MANUAL NOTICE FOR LICENSE EXEMPT RADIO APPARATUS
This device complies with Industry Canada license exempt R55 standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. CAN
ICES-005 (B).
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
FCC RESPONSIBLE PARTY
Globe Electric 2264 East 6th Street San Bernardino, CA 92410 www.globe-
electric.com
Since 1932, Globe has taken pride in offering products of the highest quality,
and a level of service unparalleled in the industry.
Should you encounter any difficulties, have any questions or simply wish to
offer us your valuable feedback, you may contact us in the following ways:
Toll Free Telephone:1-888-543-1388
(North America Only) / Toll Free
Fax:1-800-668-4562 (North America Only)
E-mail: info@globe-electric.com
Mail: Globe Electric Customer Service Department 150 Oneida, Montreal,
Quebec, Canada H9R 1A8 Please visit our website to discover other quality
Globe products: http://www.globe-electric.com
Description
FEATURES
- Indoor and outdoor use
- Dimmable: 1% -100%
- Color Changing: full spectrum of PGB colors
- Automate controls by setting schedules
- Pair with a virtual assistant to control the device with your voice
- Linkable up to 2 string lights
SPECIFICATIONS
wireless type: 2.4CHz | PCB colors + white 3000K |
---|---|
wireless standard: IEEE 802.11b/gin | input:100-120V AC, 50-60Hz, 0.5A max |
7.32m long (24ft) | output:12V- 2A |
IP44 for power adaptor | IP65 for LED string light, string light cable and |
controller
PRE-INSTALLATION
Planning Installation
Compare all parts with the “Hardware Included” section. If any part appears
missing or damaged, do not install this product and contact the Customer
Service team at 1-888-543-1388 or
e-mail to info@globe-electric.com.
No Tools Required
Hardware Included
NOTE: Hardware is not shown to actual size.
-
string lights with outdoor cable
-
controller
-
power adaptor
-
carabiner clip
MOUNTING INSTRUCTIONS
-
Step 1: Connect the power adaptor to the cable located on the left of the controller (A). To ensure proper connectivity, align the arrows on each end of the cable and tighten the seal.
-
Step 2: Connect the string lights to the cable located on the right of the controller (B).
This smart string light is linkable- connect up to 2 string lights together.
To connect 2 string lights together, remove the cap at the end of the first string light and line it up with the connector from the second light, then tighten the seal for a secure installation.
-
Step 3: Connect the power adapter to an outlet. Follow the “Connecting Instructions”.
-
Step 4: Place the string lights in your preferred location and use the included carabiner clips to secure them in place and facilitate installation.
CONNECTING INSTRUCTIONS
-
Let’s get started!
- Download the Globe Suiten” app from the App Store or Google Play to your mobile device
- Launch the Globe SuiteTM app
- To register, enter your email address, create a password, then log in to the app OR
- Log in if you already have an account
-
Verify your network
- Verify your network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel
- Consult your router documentation for detailed instructions on how to change wireless settings.
-
Scan mode
-
Power on your device
-
Select the “+” symbol on the top right hand corner
-
Follow instructions within the app
-
If your device is flashing rapidly and fails, try using EZ Mode EZ mode
-
Select the “+” symbol on the top right hand corner
-
Select “Manual”
-
Select your product type and follow the instructions within the app
-
If the connection fails, try using AP mode
AP mode -
Select the “+” symbol on the top right hand corner
-
Select “Manual”
-
Select your product type
-
Open the menu on the top right hand corner and select “AP mode”
-
Follow the instructions within the app
-
-
Set up voice assistance
- Select “Profile,” and select “Integration”
- Select your voice assistant and follow the instructions within the app
Did you know?
Most modern routers are dual-band, meaning they support both 2.4 GHz and 5 GHz
channels. The most common wireless options are:
- Mixed: The router will broadcast both 2.4 GHz and S GHz simultaneously under the same SSID. The device will choose which to connect to based on multiple variables (congestion, distance to router, etc.).
- 2.4 GHz: Broadcast only on this channel
- 5 GHz: Broadcast only on this channel
- Dual 2.4 and 5 GHz using Separate SSIDS: Router will broadcast both channels and user manually decides which to connect to.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>