Globe Electric GB35798 LED Bulb Instructions
- June 5, 2024
- Globe Electric
Table of Contents
Globe Electric GB35798 LED Bulb Instruction
CAUTION:
DO NOT USE WITH STANDARD DIMMER. Only use the control provided with or
specified by these instructions to control this lamp. This lamp will not
operate properly when connected to a standard (incandescent) dimmer or dimming
control. The bulb can be switched to different operating modes and is dimmable
through the Tuya app. For use only in 120V/60HZ circuits. Risk of electrical
shock. Do not open, no user-serviceable parts inside. This device is not
intended for use with emergency exit fixtures or emergency exit lights,
photocells and electronic timers. This device is intended for indoor use. Do
not use where directly exposed to water. Minimum operating temperature is-20°C
(-4°F). This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment. This Class B digital apparatus complies
with CAN ICES-OOS(B).
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with
minimum distance 20cm between the radiator &your body.
USER MANUAL NOTICE FOR LICENCE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. CAN
ICES-OOS(B)
RADIATION EXPOSURE STATEMENT
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator and your body.
FCC RESPONSIBLE PARTY
+86-1-382-525-3712
CONNECTING INSTRUCTIONS
Make sure your mobile device is running iOS 9.0/watchOS 2.0/Android 4.4 or higher.
-
Let’s get started
-
Download the Tuya app from the App Store or Google Play to your mobile device.
-
Launch the Tuya app.
-
To register, enter your email address. Create a password, then login to the app.
OR -
Login if you already have an account.
-
-
- Verify your network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel.
- Consult your router documentation for detailed instructions on how to change wireless settings.
-
-
Select the”+” symbol on the top right-hand corner.
-
Select your product type and follow the instructions within the app.
-
If the connection fails, try AP mode.
AP mode -
On the “add a device” page select AP mode on the top right-hand corner and follow the instructions within the app.
-
If the connection fails, try Scan mode.
Scan mode -
Select the”+” symbol on the top right-hand corner.
-
Select “Scan”.
-
Follow instructions within the app.
-
You’re good to go!
-
-
Setup voice assistance
- Instructions in the Tuya app:
Select “Profile”, select “Integration”, choose your voice assistant, and follow instructions.
- Instructions in the Tuya app:
DO YOU KNOW
Most modern routers are dual-band meaning they support both 2.4 GHz and 5 GHz channels. The most common wireless options are:
- Mixed: The router will broadcast both 2.4 GHz and 5 GHz simultaneously under the same SSID. The device will choose which to connect to based on multiple variables (congestion, distance to router etc.).
- 2.4 CHz: Broadcast only on this channel.
- 5 CHz: Broadcast only on this channel.
- Dual 2.4 and 5 CHz using Separate SSIDS: Router will broadcast both channels and user manually decides which to connect to.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>