Yealink SIP-T33P Classic IP Phone User Guide

: June 10, 2024
: Yealink

SIP-T33P & T33G
Classic IP Phone
Quick Start Guide

Yealink SIP-T33P Classic IP Phone

Package Contents

The following items are included in your package. If you find anything missing, contact your system administrator.![Yealink SIP-T33P Classic IP Phone

Package Content](https://manuals.plus/wp-content/uploads/2023/05/Yealink- SIP-T33P-Classic-IP-Phone-Package-Content.png)

We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party accessories may result in reduced performance.

Assembling the Phone

Attach the stand: You can also mount the phone to a wall.
Connect the handset and optional headset: 3. Connect the network and power:
You have two options for network and power connections. Your system administrator will advise you which one to use.

The IP phone should be used with Yea link original power adapter (5V/600mA) only. The use of the third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by Yea link.
If inline power (Poe) is provided, you don’t need to connect the power adapter. Make sure the hub/switch is Poe compliant.

Startup

After the IP phone is connected to the network and supplied with power, it automatically begins the initialization process.
After startup, the phone is ready for use. You can configure the phone via phone user interface or web user interface.

Configuring Your Phone

Configuring via web user interface Accessing the web user interface:

Press (the OK key) when the phone is idle to obtain the IP address of the phone.
Open a web browser on your computer, enter the IP address into the address bar (e.g., “http://192.168.0.10” or “192.168.0.10”) and then press the Enter.
Enter the user name (default: admin) and password (default: admin) in the login page and click Login.

Network Settings: Click on Network- >Basic->IPv4 Config
You can configure the network settings in the following ways:
DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid network settings, e.g., IP address, subnet mask, gateway address and DNS address.
Static IP Address: If your phone cannot contact a DHCP server for any reason, you need to configure the IP address, subnet mask, gateway address, primary DNS address and secondary DNS address for the phone manually.
The IP phone also supports IPv6, but IPv6 is disabled by default.
Wrong network settings may result in the inaccessibility of your phone and may have an impact on the network performance. Contact your system administrator for more information.
Account Settings: Click on Account->Register ->Account X (X=1, 2, 3, 4)
Parameters of the account:
Register Status: It shows the register status of the current account.
Line Active: You can select Enabled/Disabled to enable/disable the account.
Label: It is shown on the LCD screen to identify the account.
Display Name: It is shown as caller ID when placing a call.
User Name: It is provided by TIPS for registration (required).
Register Name: It is an authenticated ID for authentication provided by TIPS (required).
Password: It is provided by TIPS for registration (required).
Server Host: It is provided by TIPS for registration (required).
Register status icons on the LCD screen:

(Green)Registered
(Yellow) Registering
(Gray)Register Failed
Check with your system administrator if any error appears during the registration process or a specific configuration is required for your registration.
Configuring via phone user interface Network Settings:
Press the Menu soft key when the phone is idle, select Advanced (default password: admin)->Network-> WAN Port->IPv4 to configure the network.
Account Settings:
Press the Menu soft key when the phone is idle, select Advanced (default password: admin)->Accounts to configure the account.
For more information on account parameters, refer to Configuring via web user interface above.

Placing a Call

Using the handset:

Pick up the handset.
Enter the number and press the Send soft key.

Using the speakerphone:

With the handset on-hook, press .
Enter the number and press the Send soft key.

Using the headset:

With the headset connected, press to activate the headset mode.
Enter the number and press the Send soft key.

Answering a Call

Using the handset: Pick up the handset.
Using the speakerphone: Press .
Using the headset: Press .
You can reject an incoming call by pressing the Reject soft key.

Ending a Call

Using the handset: Hang up the handset or press the EndCall soft key.
Using the speakerphone: Press or the EndCall soft key.
Using the headset: Press the EndCall soft key.

Redial

Press to enter the Placed Calls list, select the desired entry, and press or the Send soft key.
Press twice when the phone is idle to dial out the last dialed number.

Call Mute

Press to mute the microphone during a call.
Press again to un-mute the call.

Call Hold

To place a call on hold: Press the Hold soft key during an active call.
To resume the call, do one of the following:

If there is only one call on hold, press the Resume soft key.
If there is more than one call on hold, select the desired call, and press the Resume soft key.

Call Transfer

You can transfer a call in the following ways:
Blind Transfer

Press the Trans soft key during an active call.
Enter the number you want to transfer to.
Press the B Trans soft key.

Semi-Attended Transfer

Press the Trans soft key during an active call.
Enter the number you want to transfer to, and press the Send soft key.
Press the Trans soft key when you hear the ringback tone.

Attended Transfer

Press the Trans soft key during an active call.
Enter the number you want to transfer to, and press the Send soft key.
Press the Trans soft key when the second party answers.

Call Forward

To enable call forward:

Press the Menu soft key when the phone is idle, and then select Features->Call Forward.
Select the desired forward type.
Enter the number you want to forward to. For No Answer Forward, select the desired ring time to wait before forwarding from the After Ring Time field.
Press the Save soft key to accept the change.

Call Conference

Press the Conf soft key during an active call. The call is placed on hold.
Enter the number of the second party, and press the Send soft key.
Press the Conf soft key again when the second party answers. All parties are now joined in the conference.
Press the EndCall soft key to disconnect all parties.
You can split the conference call into two individual calls by pressing the Split soft key.

Speed Dial

To configure a speed dial key:

Press the Menu soft key when the phone is idle, and then select Features->Dsskey.
Select the desired DSS key, and press the Enter soft key.
Select SpeedDial from the Type field, select the desired line from the Account ID field, enter a label in the Label field, enter the number in the Value field.
Press the Save soft key to accept the change.

To use the speed dial key:
Press the speed dial key to dial out the preset number.

Voice Message

Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message center. The power indicator LED slowly flashes red.
To listen to voice messages:

Press or the Connect soft key.
Follow the voice prompts to listen to your voice messages.

Call History

Press the History soft key when the phone is idle, press to scroll through the list.
Select an entry from the list, you can do the following:
• Press the Send soft key to call the entry.
• Press the Delete soft key to delete the entry from the list.

If you press the Option soft key, you can also do the following:

Select Detail to view detailed information about the entry.
Select Add to Contacts to add the entry to the local directory.
Select Add to Blacklist to add the entry to the blacklist.
Select Delete All to delete all entries from the list.

Contact Directory

To add a contact:

Press the Dir soft key when the phone is idle, and then select All Contacts.
Press the Add soft key to add a contact.
Enter a unique contact name in the Name field and contact numbers in the corresponding fields.
Press the Save soft key to accept the change.

To edit a contact:

Press the Dir soft key when the phone is idle, and then select All Contacts.
Press to select the desired contact, press the Option soft key and then select Detail from the prompt list.
Edit the contact information.
Press the Save soft key to accept the change.

To delete a contact:

Press the Dir soft key when the phone is idle, and then select All Contacts.
Press to select the desired contact, press the Option soft key and then select Delete from the prompt list.
Press the OK soft key when the LCD screen prompts “Delete selected item?”.

Volume Adjustment

Press to adjust the volume.
Regulatory Notices
Operating Ambient Temperatures

Operating temperature: +14 to 122°F (-10 to 50°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C)

Warranty
Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party. We are not liable for problems with Yealink device arising from the use of this product; we are not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product.
DC symbol
**is the DC voltage symbol.
Restriction of Hazardous Substances Directive (RoHS)**
This device complies with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained by contacting support@yealink.com.

Safety Instructions

Save these instructions. Read these safety instructions before use!
The following basic safety precautions should always be followed to reduce risk of fire, electrical shock, and other personal injury.
General Requirements

Before you install and use the device, read the safety instructions carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please always keep the device dry and clean.
During the process of storage, transportation, and operation, please avoid collision and crash of the device.
Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center for repair.
Without prior written consent, no organization or individual is permitted to make any change to the structure or the safety design of the device.
Yealink is under no circumstance liable to consequences or legal issues caused by such changes.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.

Environmental Requirements

Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
Keep the device dry and free of dusts.
Place the device on a stable and level platform.
Please place no heavy objects on the device in case of damageand deformation caused by the heavy load.
Keep at least 10 cm between the device and the closest object for heat dissipation.
Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a candle or an electric heater.
Keep the device away from any household appliance with strong magnetic field or electromagnetic field, such as a microwave oven or a refrigerator.

Operating Requirements

Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of accidental swallowing.
Please use the accessories provided or authorized by the manufacturer only.
The power supply of the device shall meet the requirements of the input voltage of the device. Please usethe provided surge protection power socket only.
Before plugging or unplugging any cable, make sure that your hands are completely dry.
Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool.
Do not tread on, pull, or over-bend any cable in case of malfunction of the device.
During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.
If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately. Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables.

Cleaning Requirements
• Before cleaning the device, stop using it and disconnect it from the power supply.
• Use a piece of soft, dry and anti-static cloth to clean the device.
• Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other perils.
ENVIRONMENTAL RECYCLING
Never dispose of the device with domestic waste
Ask your Town Council about how to dispose of it in an environmentally friendly way. The cardboarc box, plastic packaging and player components may be recycled in accordance with prevailing recycling regulations in your country.
Always adhere to prevailing regulations
Those who fail to do so may be fined or prosecuted in accordance with the law. The crossed out garbage can that appears on the device means that when it has reached the end of its useful life, it should be taken to a special waste disposal centre and treated separately to general urban waste.

Troubleshooting

The unit cannot supply power to Yealink device.
There is a bad connection with the plug.

Clean the plug with a dry cloth.
Connect it to another wall outlet.

The usage environment is out of operating temperature range.

Use in the operating temperature range.

The cable between the unit and the Yealink device is connected incorrectly.

Connect the cable correctly.

You cannot connect the cable properly.

You may have connected a wrong Yealink device.
Use the correct power supply.

Some dust, etc., may be in the port.

Clean the port.
Contact your dealer or authorized service facility for any further questions.

Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA Made in China

Declaration of Conformity

We,
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD,
Address: 309, 3rd Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R.C
CE DATE: 10 th/July/2020
SIP-T33P, SIP-T33G
declare that the product
Type: Classic IP Phone Model:
meets the essential requirements and other relevant provisions according to the following EC directive
Directive: 2014/35/EU, 2014/30/EU; Conformity
The product complies with the following standards:
Safety : EN 62368-1:2020/A11:2020
EMC: EN 55032:2015
EN 55035:2017
EN61000-3-2: 2014
EN61000-3-3: 2013
Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the Council of 8 June 2011 and 4 June 2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(RoHS 2.0)
Directive 2012/19/EU of the European Parliament and of the Council of 4.July.2012 on Waste electrical and electronic equipment(WEEE)
Regulation (EC) No.1907/2006 of the European Parliament and of the Council of 18.December.2006 on Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH)

YEALINK (EUROPE) NETWORK TECHNOLOGY B.V
Address: Strawinskylaan 3127, Atrium Building, 8th floor,
1077ZX Amsterdam, the Netherlands
Telephone: +31(0)646111373
Email: EUROPE@Yealink.com

Addr: 309, 3rd Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R.C
Tel: +86-592-5702000
Fax: +86-592-5702455

Technical Support

Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your
technical issues.

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Copyright©2021 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD.All rights reserved.

Yealink SIP-T33P Classic IP Phone - qr code http://support.yealink.com/