FOREVER Subli Light Sublimation for Light Cotton Instructions
- June 10, 2024
- FOREVER
Table of Contents
Subli Light Sublimation for Light Cotton
Instructions
INSTRUCTIONS:
SUBLI-LIGHT (NO – CUT)
FOR WHITE & LIGHT COLORED COTTON , POLYESTER, NYLON & MORE
PRINT SETTINGS:
- Image Mode: mirrored
- Print Mode: Use the Virtuoso Print Manage and the FOREVER Profile for printing with SAWGRASS SG400/800. All other sublimation printers should be used with the standard settings and standard driver.
- Image Style: Only for full-tone vector graphics. Not suitable for photographs and light colors
TRANSFER PROCESS:
- Preheat your heat press. Make sure that the metal plate underneath the rubber mat is also hot.
- Place the textile on your lower plate and pre-press it for 5 seconds.
- Place the transfer paper onto the textile.
- Press for 20-30 seconds.
- Remove the transfer paper after 2 seconds. (Never take the T-Shirt off the press before the transfer paper has been peeled off.)
- For a better washability put a sheet of Matt Finish Economy or Glossy Finish with the glossy side faced down onto your design and press again for 30 seconds with high pressure.
- Stretch the t-shirt after removing the silicone paper as long as the shirt is hot. This leads to a softer touch.
TRANSFER SETTINGS: HEAT PRESS
| AUTOMATIC HEAT PRESS| MANUAL HEAT PRESS
---|---|---
PRESSURE| 3-4 bar/44-58 PSI| medium-high
TEMPERATURE| 170°C (338°F)| 170°C (338°F)
TIME| 20-30 seconds| 20-30 seconds
FIXING| 30 seconds (high pressure)| 30 seconds (maximum pressure)
WASHING:
- Up to 30°C (cold wash cycle)
IRONING:
- When ironing cover the print with baking paper
IMPORTANT:
- You cannot print all colors. Please make sure that you are creating and selecting your designs with a minimum ink amount of 100% for the colors.
IMPORTANT:
- You must transfer immediately after printing (The longer the time in between printing and pressing, the less would transfer)
| Before starting a mass production, we recommend to make transfer and washing
test with all materials. Important advice for doublesided printing on
textiles: T-Shirts for a double- sided print (frontside & backside), have to
be put over the lower heat plate.
In this case only one side will be treated with heat and you avoid that the
applicated design from the other side will be pressed out again. If your
T-Shirt is yellowing, lay a piece of fleece onto it during the transfer
process.
---|---
www.amayauk.com
02392 590 281
sales@amayauk.com
Southern Office: 400-450 Nest Business Park, Martin Road, Havant,
Hampshire, PO9 5TL
Midlands Office: Unit 4A-C East Bridgford Business Park, Kneeton Road,
East Bridgford, Nottingham, NG13 8PJ
Leaders in Garment Decoration Equipment
Documents / Resources
|
FOREVER Subli Light Sublimation for Light
Cotton
[pdf] Instructions
Subli Light Sublimation for Light Cotton, Subli Light, Sublimation for Light
Cotton, Light Cotton, Cotton, Sublimation
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>