COASTAL SOURCE B10SW8BN 10.0 Bollard Subwoofer User Guide

B10SW8BN 10.0 Bollard Subwoofer
User Guide

B10SW8BN 10.0 Bollard Subwoofer

Keep this manual for future reference
© 2022 Coastal Source
Data is subject to change without notice.
For the latest update, please refer to the online version available on www.coastalsource.com.

Features & Benefits

• Sleek design that can be easily hidden within a landscape yet looks great when installed out in the open.
• Large driver area compared to conventional outdoor speakers offering higher performance, higher efficiency, higher fidelity & less compromise.
• Installation flexibility in many forms for above-ground or in-ground applications.
• High quality materials and construction built to Defy the Elements™.
• Built to be part of a complete patented Coastal Source Plug+Play system or can be easily integrated into existing systems.

SPEAKER INSTALLATION OPTIONS

Direct Burial Installation
For well draining soils, dig a hole 12” in diameter and up to 21” deep. Level the speaker in the hole then backfill with clean sand or soil being sure that the bottom edge of the subwoofer grill remains at least 1” above grade. Compact the sand/soil to make sure the speaker will not shift or settle over time. For poor soils, consult the Poor Soil Installation Guide.
Note: Hard to dig areas may benefit from a gas-powered handheld 12” auger (may be rented locally).
Note: Avoid installing in locations that are prone to flooding.
Hardscape Mount Installation
Once the appropriate location is selected, secure the recess mount to the surface with fasteners appropriate for the surface material. Slide the bollard over the recess mount and orient the speaker in the appropriate direction. Insert the supplied set screws and tighten in a uniform fashion so they all make contact with the recess mount before final tightening.

WIRING INSTALLATION

All Coastal Source speakers feature our patented Coastal Connector™ for a waterproof direct burial connection. For connecting to a Coastal Source amplifier just select the appropriate cable lengths and y-cables and Plug+Play the speakers to the amplifier. For connection to 3rd party (non-CS) amplifiers, Coastal Source pigtail cables are available to convert the Coastal Connector™ on the speaker to a typical 2 conductor bare wire that can be spliced in to a conventionally wired system.
Cabling Rules
Coastal Connector™ 12AWG cables can be run up to 300’ total per channel without any significant degradation of performance. Coastal Source systems ship preset for typical applications. Adjustments should only by made my Certified Dealers.
For ultimate flexibility, the bottom of the 10.0 Bollard Subwoofer features an additional input to allow future attachment of a 10.0 Bollard Satellite. These two inputs must be crossed over before reaching the speakers. The Hi Pass filter for the Satellite section should be set to play 120Hz and above. The Lo Pass filter for the Sub section should be set to play 120Hz and below.
To attach a Satellite, simply unscrew the cap via the (4) hex head set screws, attach the Satellite CC male input connection to the CC female output that’s located on the top of the Sub, and re-install the set screws. Be sure the satellite is fit snug to the top of the Sub section.
Coastal Source speakers operate at 8 ohms. Two speakers can be paralleled per channel with amps that are stable to 4 ohms and four can be paralleled per channel with amps that are stable to 2 ohms. Carefully consult the amplifier manual for low impedance drive ability and stability. All Coastal Source amplifiers are stable to 2 ohms.

SOUND TUNING

Note that optimal sound tuning is subjective and specific to each listener so there are no hard and fast rules for optimizing the sound of a Coastal Source system. We have designed with flexibility to allow you to shape the sound to your personal preferences. The following information is offered as a brief guide. It is highly recommended to take the time to experiment and tune the system to achieve your desired sound.
NOTE: Coastal Source outdoor audio systems are the clearest and most efficient on the market, but they are not designed to run at 100% volume full- time. If the system is going to be played at loud volumes for an extended period of time, Coastal Source recommends setting the volume to 75-80%.

SUBWOOFER PLACEMENT

Since very low frequencies are omni-directional placement is less critical, but experimenting with placement is still recommended since proximity to walls and corners will have a significant effect on the bass output.
Above Ground – Open area
Less bass response
Above Ground – Near a rear wall surface
Heavy bass response. Low frequencies gather in corners and travel better though surfaces like the ground or walls than the air.
Buried Vertical
Slightly heavier bass response than above ground.
Streaming Quality
Today most people stream music from a mobile device to listen to music. This makes the quality of the streaming source paramount to the overall quality of the sound of an audio system. Whether demoing a system for a client, showing off to your friends, or just listening by yourself, streaming quality can make a huge difference. Below are the maximum streaming quality rates available for the most popular music streaming services (when streaming from a mobile device). They are listed in ascending order of maximum quality.

• Pandora: Up to 64kbps
• Rdio: Up to 192kbps
• iTunes: Up to 256kbps
• Beats Music: Up to 320kbps
• Google Play: Up to 320kbps
• Spotify: Up to 320kbps
• Deezer: Up to 14410kbps (lossless)
• Tidal: Up to 14410kbps (lossless)

Keep in mind that all of these services are set by default to lower quality streaming rates. Higher rates consume much more mobile data/bandwidth, so the default is always a lower quality stream. Change these rates in settings to obtain the best quality possible.
Equalization
If equalization is available from your streaming device it can aid in further fine tuning of the system’s sound. Note that equalization is not a substitute for proper speaker placement and orientation. Equalization should be used in moderation to make the fine tuning adjustments as needed.

SETUP & INSTALLTION GUIDELINES

Spacing Guidelines
Maximum distance between speakers: 40’
Minimum distance between speakers: 12’
Speaker Coverage Guidelines
Each bollard subwoofer can cover 100-400 sqft of listening space.

SPECIFICATIONS

Physical Specifications
Size: 30in x 10in
Weight: 29.1lbs
Finish: Brown
Subwoofer: 8” Composite Cone w/ Santoprene Surround
Construction: Rotomolded Composite Performance Specifications
Power Handling: 300W Max
Minimum Recommended Amplifier Power: 100 Watts
Frequency Response: 35Hz – 120Hz
Impedance: 8 ohms
Input: Male Coastal Connector™
Efficiency: 92dB 1w/M
Dispersion: 360°
OPTIONAL ACCESSORIES
Large Tri-Stabilizer
Isolation Spikes
Hardscape Mount

WARRANTY INFORMATION

COASTAL SOURCE warrants its goods against defects in material and functionality. At COASTAL SOURCE’s sole discretion, COASTAL SOURCE will either repair or replace (at no charge) any properly installed and maintained COASTAL SOURCE goods that fail under normal operating conditions within the specified warranty period noted below. All goods are warranted from the date of invoice, provided they are returned to the corporate office for inspection (transportation prepaid) and determined defective under the terms of the warranty. This warranty covers only equipment manufactured by COASTAL SOURCE and does not extend to transportation, installation, labor compensation, or replacement charges, nor does it apply to any equipment of another manufacturer used in conjunction with COASTAL SOURCE equipment. Our warranty becomes null and void in the event of damage to the product resulting from breakage due to abuse or misuse; repairs, alterations or modifications of the product by anyone other than authorized representatives thereof; damage resulting from accidents, vandalism, acts of nature, and improper use. See Lifetime Care Program for additional options.
**This product bears a five (5) year limited warranty.***

• All Coastal Source products bear a 2-year limited warranty for commercial/non-residential installations.
  Filing a Claim
  To file a warranty claim, please contact us to receive a Return Materials Authorization number (RMA) and a return shipping label:
  COASTAL SOURCE
  WARRANTY CLAIMS DEPARTMENT
  1.800.719.1996
  warranty@coastalsource.com
  Please include your contact information, a copy of your receipt and reason for the return.

1270 Glen Avenue
Moorestown, NJ 08057
Tel: 1-800-719-1996
General inquiries: info@coastalsource.com
Service & maintenance: warranty@coastalsource.com
www.coastalsource.com

References

• Coastal Source | High-Performance Outdoor Audio & Lighting
• Coastal Source | High-Performance Outdoor Audio & Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>