COASTAL SOURCE Cube 10 Inch Outdoor Subwoofer User Guide

COASTAL SOURCE Cube 10 Inch Outdoor Subwoofer

Product Information

Specifications

• Speaker Type: CUBE
• Cable Type: Uni-Connect 8C 16AWG
• Maximum Cable Distance: 300′
• Coverage: 100-400 sqft per subwoofer

Product Usage Instructions

Wiring Installation

• All Coastal Source speakers feature the patented Coastal ConnectorTM for a waterproof direct burial connection. Use Uni-Connect 8C 16AWG cables to connect the speakers to the amplifier. For 3rd party speaker wire, use Coastal Source splice kits.

Cabling Rules

• Use Uni-Connect 8C 16AWG cables with this speaker. Maximum cable distance is 300′. Adjustments should be made by certified dealers only.

Connecting the Plug+PlayTM Connector

• Align the key-way of the cable to the key-way of the connector and fully insert the cable. Rotate the covering nut until the finger is tight. Reverse rotation if cross-threaded.

Sound Tuning

• Optimal sound tuning is subjective. Experiment to shape the sound to personal preferences. Avoid running at 100% volume full-time.
• The recommended volume for loud play is 75-80%.

Subwoofer Placement

• For hardscape applications, integrated rubber feet prevent rattling. Experiment with placement for bass output optimization.

Setup & Installation Guidelines

• Maximum distance between speakers: 40′
• Minimum distance between speakers: 12′

Speaker Coverage Guidelines

Each CUBE subwoofer can cover 100-400 sqft of listening space.

Phase Inversion

The CUBE comes with a phase inversion switch. Experiment with settings to choose the one that sounds best.

FAQ

Q: Can I use another speaker wire with this system?

A: Yes, you can use Coastal Source splice kits to adapt the Uni-Connect 8C 16AWG connections for third-party speaker wire.

Q: What is the recommended volume level for extended play?

A: Coastal Source recommends setting the volume to 75-80% if the system will be played at loud volumes for an extended period of time.

FEATURES & BENEFITS

• Coastal quality powerful and extended bass from a compact, 17” cube.
• The designer-friendly configuration allows for customization with a selection of drop-in natural stone tops or the ability to have our contractor make a drop-in that matches your decking or other desired finish.
• Proprietary 10” high-power down-firing subwoofer driver.
• (2) Stone Top options (Crosscut Travertine or Brown Granite).
• Rotomold composite weather-resistant color-through enclosure.
• Integrated rubber feet for vibration isolation.

WIRING INSTALLATION

All Coastal Source speakers feature our patented Coastal Connector™ for a waterproof direct burial connection. For connecting to a Coastal Source amplifier, just select the appropriate Uni-Connect 8C 16AWG cable lengths and Plug+Play™ the speakers to the amplifier. For situations where 3rd party speaker wire must be used, Coastal Source splice kits are available to adapt the Uni-Connect 8C 16AWG connections on the speaker to more conventional speaker wire.

CABLING RULES

• This speaker is designed for use with Uni-Connect 8C 16AWG cables and has (1) Uni-Connect 8C input connection.
• Uni-Connect 16 AWG cables can be run at a maximum distance of 300’ total without any significant degradation of performance.
• If longer lengths are required, please contact Coastal Source. Coastal Source systems ship preset for typical applications. Adjustments should only be made by certified dealers.

CONNECTING THE PLUG+PLAY™  CONNECTOR

• Align the key-way of the cable to the key-way of the connector and fully insert the cable into the connector. Carefully rotate the covering nut until the finger is tight.
• If the covering nut is cross-threaded, reverse rotation and carefully align the nut to re-thread.

SOUND TUNING

• Note that optimal sound tuning is subjective and specific to each listener so there are no hard and fast rules for optimizing the sound of a Coastal Source system.
• We have designed it with the flexibility to allow you to shape the sound to your personal preferences.
• The following information is offered as a brief guide. It is highly recommended to take the time to experiment and tune the system to achieve your desired sound.
• NOTE: Coastal Source outdoor audio systems are the clearest and most efficient on the market, but they are not designed to run at 100% volume full-time.
• If the system is going to be played at loud volumes for an extended time, Coastal Source recommends setting the volume to 75-80%.

SUBWOOFER PLACEMENT

• For hardscape applications, the integrated rubber feet provide isolation to prevent rattling.
• Since very low frequencies are omni-directional placement is less critical, but experimenting with placement is still recommended since proximity to walls and corners will have a significant effect on the bass output.

Open area

• Less bass response

Near a wall surface

• Heavy bass response. Low frequencies gather in corners and travel better through surfaces like the ground or walls than the air.

SETUP & INSTALLATION GUIDELINES

Spacing Guidelines

• Maximum distance between speakers: 40’
• Minimum distance between speakers: 12’

Speaker Coverage Guidelines

• Each CUBE subwoofer can cover 100-400 sqft of listening space.

Phase Inversion

• The CUBE comes with a phase inversion switch (see below). Once the speaker is placed in its intended location, experiment with the Phase Inverter and listen to the sound in both settings. Choose the setting that sounds best.

SPECIFICATIONS

• Size (L x W x D): 17” x 17” x 16.75”
• Weight: 50lbs (without top)
• Construction: Rotomolded Color-Through Composite Finish: Brown
• Top Options: None (Provide your own), Crosscut
• Travertine, Brown Granite
• Drivers: ( 1) 10” Subwoofer with a Fiberglass Cone, Santoprene Surround, Linear Dual-Spider Suspension System with Conex Aramid Fibers and Silicon Impregnation, 2” In/Out High-Power Voice Coil and an Aluminum Basket
• Power Handling: 175W Continuous, 350W Max Frequency Response: 35Hz – 120Hz (@-6dB) Sensitivity: 86dB @ 1W/m
• Dispersion: Omni-Directional
• Impedance: 8 ohms
• Mounting: Freestanding
• Input Connector: ( 1) Uni-Connect 8C 16AWG Male Chassis Connector (8C to 2C Adapter included)
• Polarity Switch: (1) Cap Switch

WARRANTY INFORMATION

• COASTAL SOURCE warrants its goods against defects in material and functionality. At COASTAL SOURCE’s sole discretion, COASTAL SOURCE will either repair or replace (at no charge) any properly installed and maintained COASTAL SOURCE goods that fail under normal operating conditions within the specified warranty period noted below.

• All goods are warranted from the date of invoice, provided they are returned to the corporate office for inspection (transportation prepaid) and determined defective under the terms of the warranty.

• This warranty covers only equipment manufactured by COASTAL SOURCE and does not extend to transportation, installation, labor compensation,
  or replacement charges, nor does it apply to any equipment of another manufacturer used in conjunction with COASTAL SOURCE equipment. Our warranty becomes null and void in the event of damage to the product resulting from breakage due to abuse or misuse; repairs, alterations, or modifications of the product by anyone other than authorized representatives thereof; damage resulting from accidents, vandalism, acts of nature, and improper use. See Lifetime Care Program for additional options.

• This product bears a five (5) year limited warranty.

• All Coastal Source products bear a 2-year limited warranty for commercial/non-residential installations.

Filing a Claim

• To file a warranty claim, please contact us to receive a Return Materials Authorization number (RMA) and a return shipping label:

WARRANTY CLAIMS DEPARTMENT

• 1.800.719.1996
• warranty@coastalsource.com
• Please include your contact information, a copy of your receipt, and the reason for the return.

INSTALLATION INSTRUCTIONS

CONNECT THE PLUG PLAY CONNECTOR

1. Align the key-way of the cable to the key-way of the connector and fully insert the cable into the connector. Carefully rotate the covering nut until the finger is tight.
   • PHASE INVERSION
2. If phase inversion is required (see above for details), unscrew the capswitch counterclockwise to remove it. Replace the cap switch with the arrow now pointing to 180º, and secure by screwing the cap on in a clockwise direction until tight.
   • TOP INSTALLATION
3. Install a stone top (or custom fabricated top) directly into the top of CUBE by placing one side down into the recess and then carefully lowering the other side to sit flush.
   • Link to custom fabrication template
   • PLACEMENT
4. Place the subwoofer in the desired final location.

• CUBE Subwoofer User Guidecoastalsource.com
• Scan for Specifications

Documents / Resources

| COASTAL SOURCE Cube 10 Inch Outdoor Subwoofer [pdf] User Guide
HS10SWBN-BG, HS10SWBN-BG, Cube 10 Inch Outdoor Subwoofer, Cube Subwoofer, Outdoor Subwoofer, 10 Inch Outdoor Subwoofer, 10 Inch Subwoofer, Subwoofer, Cube
---|---

References

• Coastal Source | High-Performance Outdoor Audio & Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>