FOREVER Multi Trans Select Paper Instructions
- June 10, 2024
- FOREVER
Table of Contents
FOREVER Multi Trans Select Paper
Product Information
The product is a transfer paper system designed for use with black and white, laser and LED printers, as well as white toner printers. Specifically, it is used in conjunction with FOREVER Multi-Trans Select for PAPER AND WOOD transfers. The transfer settings are suitable for use on paper/card and wood substrates.
Transfer Settings
- Heavy Paper or similar Multi-Purpose Tray
- Mirrored B &W Printers: 100% Black
- CMYK Printers : 400% Black (C: 100% + M: 100% + Y: 100% + K: 100% = 400% Black)
- WHITE TONER Printers : 300% Black (C: 100% + M: 100% + Y: 100% = 300% Black)
- Pressure : 2-3 bar/medium
- Time : 10 seconds (paper/card substrates) or 90 seconds (wood substrates)
- Peel : Cold
| SUBSTRATE | PRESSURE | TEMPERATURE | TIME | PEEL |
|---|---|---|---|---|
| PAPER/CARD | 2-3 bar/medium | 150°C/300°F | 10 seconds |
cold
WOOD| 2-3 bar/medium| 130°C/265°F| 90 seconds| cold
Product Usage Instructions
- Select the appropriate transfer settings depending on the printer being used and the substrate to be transferred onto.
- Load the transfer paper into the printer’s heavy paper or multi-purpose tray.
- Print the desired image onto the transfer paper in a mirrored format.
- Apply pressure to the transfer using a heat press set at 2-3 bar/medium.
- For paper/card substrates, press for 10 seconds. For wood substrates, press for 90 seconds.
- Peel the transfer paper off the substrate once it has cooled down completely.
Note : It is important to follow the transfer settings and usage instructions provided to ensure optimal results when using this product.
Contact details for further information or support:
- Website : www.amayauk.com
- Phone : 02392 590 281
- Email : sales@amayauk.com
- Southern Office : 400-450 Nest Business Park, Martin Road, Havant, Hampshire, PO9 5T
- Midlands Office : Unit 4A-C East Bridgford Business Park, Kneeton Road, East Bridgford, Nottingham, NG13 8PJ
PRINTER SETTINGS
- Paper Settings : Heavy Paper or similar
- Printer Settings : Multi-Purpose Tray
- Image Mode : Mirrored
- Image Preparation : B&W Printers: 100%
- Black CMYK Printers : 400% Black (C: 100% + M: 100% + Y: 100% + K: 100% = 400% Black)
- WHITE TONER Printers: 300% Black (C: 100% + M: 100% + Y: 100% = 300% Black)
TRANSFER APPLICATION PAPER/CARD
- Place your transfer paper onto the substrate on which you want to press.
- Cover everything with a sheet of Matt Finish Economy. (If the surface is uneven, use a thin silicone pad with 1mm thickness).
- Close the press using the settings above.
- After the pressing process, place your substrate to one side and allow it to cool down.
- When the substrate has completely cooled down, carefully remove the transfer paper.
TRANSFER APPLICATION WOOD/ROUGH SURFACES
- Place your transfer paper onto the substrate on which you want to press.
- Cover everything with a sheet of Matt Finish Economy.
- Cover with a 1mm silicone pad. This prevents the edges of the transfer paper from transferring to the substrate.
- Close the press using the settings above.
- After the pressing process, place your substrate to one side and allow it to cool down.
- When the substrate has completely cooled down, carefully remove the transfer paper.
www.amayauk.com | 02392 590 281 | sales@amayauk.com
Southern Office : 400-450 Nest Business Park, Martin Road, Havant, Hampshire, PO9 5TL
Midlands Office : Unit 4A-C East Bridgford Business Park, Kneeton Road, East Bridgford, Nottingham, NG13 8PJ
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>