SY Wireless Bicycle Speedometer and Odometer User Manual
- June 10, 2024
- SY
Table of Contents
SY Wireless Bicycle Speedometer and Odometer
Specifications
- Brand SY
- Item Weight 90 Grams
- Screen Size 2 Inches
- Display Type LCD
- Sensor Type Speed Sensor
- Battery Cell Composition Polymer
- Human Interface Input Buttons
- Item Package Dimensions L x W x H 5.31 x 4.29 x 1.06 inches
- Package Weight 0.09 Kilograms
- Material Blend
Description
automatically exits sleep mode when detecting a bicycle vibration. View riding statistics with ease on a bright LCD display. It’s portable, lightweight, wireless, and robust due to its waterproof build. This bicycle computer calculates the rider’s time, distance, and speed. What every serious cyclist or fitness enthusiast needs to know to track their numbers. illumination is provided for convenient seeing during the night. Any button pressed between 18:00 and 06:00 will cause the backlight to turn on automatically. Please be aware that the device’s minor vibration is a normal phenomenon caused by the design of wireless automated function.
Easy setup that just needs a few minutes. The interface is simple to use and only requires two buttons to get all measurements. Adaptable to the majority of popular tyre sizes for precise stats tracking. This bicycle computer is compatible with a variety of typical bicycles, including road bikes, mountain bikes, folding bikes, and more. Some electric-assist bicycles COULD NOT be used with this bike computer. Device should be fully compatible if the computer display, sensor, and magnet can be installed within the allowed distances. If you have any questions, don’t be afraid to get in touch with us.
How To Assemble
- Open the electromagnetic over and put in the battery.
- Mounting magnet.
- Install sensor.
- Install the pedestal of the bicycle computer.
- Fix the bicycle computer on the pedestal.
- Sensor installation
- Distance between sensor and magnet is about 5mm.
Installation Requirements
- Only the distance between the sensor and main unite is less than 60cm, main unit can receive signals and then work.
- The distance between the magnet and the sensor should be 3mm. the closer, the better.
- Magnet should face toward the upside or downside of the sensor. Don’t face toward the middle of it.
What’s In The Box
Bicycle Speedometer and Odometer with manual
How To Change Time
- Hold down the right button until the “clock” mode appears.
- Keep holding down the left button until 12/24 appears.
- After accepting, press the right button to see the hour flash.
- The minutes will flash after using the left and right buttons to alter and accept, respectively.
- Change with the left button, accept with the right button, and you’re done.
How To Change The Kilometer To Miles Per Hour
- Remove the battery and perform a reset.
- Establish tyre weeks.
- Press and hold both buttons simultaneously. Keep pushing the left button until the four-digit numbers start to flash until the km/h flashes, and then hit the right button once. There is mph.
How To Change Kilometer To Meter Per Hour
- On the lower left of the screen, in time mode, there will be a small clock image. If it doesn’t appear, keep pressing the right button until it does.
- Three seconds of pressing both buttons causes the bottom right number to begin blinking.
- Four times on the left button will display the small letters KM.
- The KM switches to M when you press the right button.
- If you press the left button, either 20,40,60, or 80 will appear. Leave the number as it is because this is merely a maintenance reminder and is unimportant.
- Once you press the left button, you’re done.
- Press the right button to return to the time and speedometer panel, where the speedometer is now shown in M/hr. and you can see the small clock once more.
How To Install
- Using the included thumb screw, the magnet is fixed onto two spokes of the front wheel.
- Two of the included wire ties are used to secure the transmitter to the front fork adjacent to the magnet.
- Using the two wire ties that are included, the receiver is secured to the handle bar. Trim the extra wire tie ends using a wire cutter to tidy it up. If you don’t have a wire cutter, scissors or nail cutter will do the trick.
- Since this is wireless, a cable is not necessary.
- You can set it to your wheel size, mph or kph, etc.
Frequently Asked Questions
What is the SY Wireless Bicycle Speedometer and Odometer?
The SY Wireless Bicycle Speedometer and Odometer is a device designed to be mounted on a bicycle to measure and display various cycling-related metrics, including speed, distance traveled, and other useful data.
How does the wireless speedometer and odometer work?
The SY Wireless Bicycle Speedometer and Odometer uses wireless technology to transmit data from sensors on the bicycle to the display unit. The sensors are typically attached to the front wheel and the crankset to measure speed and rotations, respectively. The display unit then shows the relevant information in real-time.
What information does the SY speedometer and odometer display?
The speedometer and odometer typically display metrics such as current speed, maximum speed, average speed, distance traveled (both for the current trip and total distance), elapsed time, and other features like a clock and temperature display.
Is the SY speedometer and odometer waterproof?
Many models of the SY Wireless Bicycle Speedometer and Odometer are designed to be water-resistant or waterproof to some degree. However, the level of water resistance may vary depending on the specific model. It is important to check the product specifications or user manual to ensure it meets your needs.
How is the speedometer and odometer mounted on a bicycle?
The speedometer and odometer typically come with mounting brackets or straps that can be attached to the handlebars or stem of the bicycle. The sensors are then mounted on the front wheel and the crankset using zip ties or similar fastening mechanisms.
Can the speedometer and odometer be used on multiple bikes?
In most cases, the speedometer and odometer can be easily transferred between bikes, as long as the sensors are properly repositioned on each bicycle. However, some models may allow you to save multiple bike profiles, making it easier to switch between them without reconfiguring the settings each time.
Does the SY speedometer and odometer require batteries?
Yes, the speedometer and odometer typically require batteries to power both the display unit and the sensors. The specific battery type and life may vary depending on the model. It is advisable to have spare batteries on hand to ensure uninterrupted functionality.
Can the speedometer and odometer be used at night or in low-light conditions?
Many models of the SY speedometer and odometer feature a backlit display, allowing for easy visibility in low-light conditions or at night. The backlight is typically activated by a button press or through an automatic light sensor.
Can the speedometer and odometer be reset?
Yes, the speedometer and odometer usually have a reset function that allows you to clear the current trip data, such as distance traveled and elapsed time. This feature is useful if you want to track specific distances or segments during your ride.
Is the SY speedometer and odometer compatible with all types of bicycles?
The speedometer and odometer are generally compatible with most types of bicycles, including road bikes, mountain bikes, hybrid bikes, and others. However, it’s important to ensure that the sensors and mounting system can be properly installed on your specific bike. Some specialized bicycles, such as certain recumbent or folding bikes, may require additional accessories or modifications for compatibility.