FEIT Electric GLP29 Series 40W LED 4 Flexible Head Grow Light with Clamp User Guide

Model: GLP29/B/ADJS/40W/LED
USE AND CARE GUIDE
LED 4 Flexible Head Growlight with Clamp

GLP29 Series 40W LED 4 Flexible Head Grow Light with Clamp

READ BEFORE INSTALLATION
SAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning to the store, visit feit.com/help for further assistance
THANK YOU
We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this LED Flexible Growlight.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Feit Electric.

Safety Information

For your safety, always remember to:

• Turn off the power supply at the fuse or circuit breaker box before you install the fixture.
• Double-check all connections to be sure they are tight and correct.
• Account for small parts and destroy packing material, as these may be hazardous to children.

NOTE: This fixture is designed for use in a circuit protected by a fuse or circuit breaker. It is also designed to be installed in accordance with local electrical codes. If you are unisure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARNING: RISK OF SHOCK. House electric current can cause painful shock or serious injury unless handled properly.
CAUTION: Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
NOTICE: All connections must be in accordance with local electrical standards and the National Electrical Code (N.E.C.) or Canadian Electrical Code (C.E.C) as appropriate.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. CAN ICES-005 (B).
Supplier’s Declaration of Conformity:
47 CFR § 2.1077 Compliance Information
Responsible Party:
Feit Electric Company
4901 Gregg Road, Pico Rivera, CA 90660, USA
562-463-2852
Unique Identifier:
GLP29/B/ADJS/40W/LED

Limited Warranty

This product is warrantied to be free from defects in workmanship and materials for up to 5 years from date of purchase. If the product fails within the warranty period, please contact Feit Electric at info@feit.com, visit feit.com/contact- us or call 1-866-326-BULB (2852) for instructions on replacement or refund.
REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.

Pre-Installation

NOTE: Hardware images are for illustration purposes only. Actual product size may vary.
PACKAGE CONTENTS

Installation

1. Mount the clamp.
   – Mount to a stable surface like a table or shelf.
   – Max clamping width is 1.5 in.

2. Adjust the grow light.
   – Adjust heads of the grow light directly above the plant.

3. Connect the power supply.
   – Connect power supply to the grow light.
   – Connect the other end of the power supply to the wall outlet.

4. Select grow setting
   – Select grow setting using the White, Red, and Blue light options.
   – Seeding: Blue and White LEDs
   – Vegetation: White LEDs
   – Flowering: Red and White LEDs

5. Select timer.
   – To activate the timer, select one of the three options (6H, 12H, and 18H).
   – The light will turn on daily at the set time.

Using the Grow Lights

Recommended Light to Plant Distance
Plant types are generally categorized into high or low light level plant categories. The PAR value of a plant light equates to the amount of light energy that a plant can absorb. The higher the PAR, the more intense the light energy a plant can absorb facilitating accelerated vegetative and/or flowering growth. Below are the plant types and recommended optimal light energy absorption distances based on this LED Grow Light:

High light plants
Tomatoes, peppers, perennials, etc.
Seedlings Stage – 6 in. through 2 weeks of vegetative stage
Vegetative and/or Flowering Stage — 16-30 in.
Low light plants
Herbs and leafy greens (such as basil lettuce).
Seedlings Stage — 12 in. through 2 weeks of vegetative stage
Vegetative and/or Flowering Stage — 24-30 in. * The height is the distance between the light source to the top of the plant.
Increase the height of the telescoping post if dry spots on the plant begin to form.
** Growth cycle depends on the type of plant.
Plants in Seedling Growth Stage

• The recommended growth cycle is 16 or more hours of light a day.
• Seeds typically germinate in five to 10 days given optimal condtions. You’ll know seeds have germinated as soon as you see a green plant emerging from the soil.
• The plant is now in the seedling stage. The time in this stage is two to three weeks.

Plants in Vegetative Growth Stage

• The recommended growth cycle is 18 hours of light during the vegetative growth stage. This light cycle will create an environment that mimics the photoperiod in the summer with long days. It is during the vegetative growth stage that cloning, transplanting, pruning, and bending are al initiated
• Turn your LED grow light ON for 18 hours a day and then turn the light OFF and leave your plant in the dark for another six hours. Most plants will need four to six weeks in the vegetative cycle before reaching the flowering stage

Plants in Budding and Flowering Growth Stage

• Pre-flowers are the first indication that the plant is ready to move into the budding and/or flowering stage of growth.
• The pre-flowers grow at branch internodes just behind the leaf spur typically around the fourth week of vegetative growth, when the plant is six to eight weeks old.
• When you start seeing pre-flowers forming this means that the plants are ready to go into the flowering stage. You can continue to grow in the vegetative growth stage or switch to flowering at this point. The pre-flower looks like a regular female flower with white fuzzy pistils. The pre-flowering can take from one to two weeks.
• Wait to induce flowering until pre-flowers have appeared. Induce flowering by switching your light cycle to 12 hours of uninterrupted darkness and 12 hours of light.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>