Electrolux LX-1700-BK Essential Iron Instruction Manual

Electrolux LX-1700-BK Essential Iron

Product Information: Essential Iron 1700 W

The Essential Iron 1700 W is a steam iron designed for household use only. It has a water tank with a MAX line to prevent water overflow and comes with several components and accessories, including a front cover, nozzle, water inlet cover, steam burst button, spray button, steam push button, upper and lower handles, temperature regulator, conduit, rear cover, lamp, cleaning button, decoration board, skirt, and soleplate. The iron has a steam jet function, water spray feature, and auto shut-off feature. It also has four temperature settings suitable for different fabrics.

Product Usage Instructions: Essential Iron 1700 W

1. Before using the iron, read all instructions carefully and retain for future reference.
2. Fill the water tank with water up to the MAX line, using the water cup provided. Keep the iron erect when filling to prevent water overflow. It is best to use distilled water.
3. Plug the iron into the outlet and adjust the temperature regulator to a suitable temperature according to the fabric. Sort garments according to their suitable ironing temperatures.
4. Wait until the lights turn off and push the steam knob to begin steam ironing. Pay attention to the water in the water tank. When the water is almost running out, unplug the iron and refill the tank.
5. After finishing ironing, unplug the iron immediately. Turn the steam knob to empty the water tank and place the iron in an upright position.
6. Power on the iron for 5 minutes so that any remaining water should evaporate. Power off and store away properly.
7. For garment and fabric steaming, carefully slide the Textile Brush attachment over the tip of the iron before turning on. Once plugged in, set to a high temperature and wait for the blinking to turn off. Pick up the iron and hold vertically, with the tip tilted slightly.
8. When ironing heat reactive fabrics, put a layer of cloth onto the clothing you are about to iron to prevent clothes from damage.
9. Never immerse the iron in water or other liquids. Use an extension cord with an ampere rating equal to or greater than the maximum rating of the iron if necessary.

Important safety instructions

• Only use the iron for its intended use—it is designed for household use only.
• To avoid the risk of electric shock, do not immerse the iron in water or other liquids.
• Always turn the iron OFF before plugging into or unplugging from the electrical outlet.
• Never pull on the cord to unplug; instead, grasp the plug and pull on it to remove from outlet..
• Do not let the cord touch hot surfaces.
• Always disconnect iron from electrical outlet before filling iron with water, emptying iron from water, or when iron is not in use
• Do not use the iron if the cord or the appliance itself shows visible damage, or if the appliance has been dropped or is leaking.
• If the iron seems damaged or malfunctions, take it to a qualified serviceman for examination and repair. Do not disassemble yourself as incorrect reassembly may result in a risk of electric shock.
• Burns can occur from touching hot metal parts, hot water or steam. Use caution when turning the iron upside down—there may be hot water in the water tank.
• Never release steam facing people.
• To avoid a circuit overload, do not operate the iron on the same circuit with another high wattage appliance.
• If it is absolutely necessary to use an extension cord, a cord with an ampere rating equal to or greater than the maximum rating of the iron shall be used. Using a cord rated for less amperage can result in a risk of fire or electric shock due to overheating. Care should be taken to arrange the cord so that it cannot be pulled on or tripped over.
• The iron must be used and rested on a stable surface.
• The iron must not be left unattended while it is connected to the supply mains.
• Close supervision is required for any appliance used near children. Do not leave the iron unattended while it is plugged into the outlet or when it is on an ironing board.
• Children should be supervised to ensure that they do not play with appliance. Parents must warn children not to touch hot appliance parts.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision and instructions concerning use of this appliance by a person responsible for their safety

Main components and accessories

1. Front cover
2. Nozzle
3. Water inlet cover
4. Steam burst
5. Spray button
6. Steam push button
7. Upper handle
8. Temperature
9. Conduit
10. Rear cover
11. Lower handle
12. Lamp
13. Water tank
14. Cleaning button
15. Decoration board
16. Skirt
17. soleplate

Using

• Remove all labels and protective films prior to use.
• Before ironing your clothes or fabric for the first time, it is recommended that you heat the iron and use it on a damp piece of cloth for a few minutes. This will ensure that any residue left over from the manufacturing process is burnt off the ceramic soleplate and won’t transfer to your clothes.
• You may notice a slight odor and some steam coming out of the iron when using it for the first time. This is normal and should disappear quickly

Instruction Manual LX1700

Before use, please read all the instructions carefully and retain for future reference.

Steam Ironing

1. To begin steam ironing, turn the steam knob on to , then fill the tank with water using the water cup. Prevent water overflow by keeping iron erect when filling and by not exceeding the MAX line. It is best to use distilled water.
2. Put the plug into the outlet and adjust the temperature regulator to a suitable temperature according to the fabric.
3. Wait until the lights turn off, push the steam knob, and then you may begin ironing.
4. Pay attention to the water in the water tank. When the water is almost running out you must unplug the iron and refill the tank.
5. After you finish ironing, unplug the iron immediately. Turn the steam knob to setting, empty the water tank and place the iron in an upright position.
6. Put the plug into the outlet again and power on for 5 minutes so that any remaining water should evaporate. Power off and store away properly

Steam Jet Function

• Turn off the steam knob first.
• Turn the temperature regulator to MAX position (otherwise you may see water leakage).
• After the indicator goes off, press the steam jet button.
• Press the button once every second for a steam release.

Water Spray

• Ensure that the water tank has enough water in it.
• Push the water spray button four times to make the clothes wet. Spray function is used for ironing thick cotton or hemp fabric.
• Water spray can remove wrinkles.

Auto Shut-off Feature

• The red light will be on while the iron is heating.
• Once iron is heated, the light will turn off.
• When the iron is in a horizontal position, it will power off automatically after 30 seconds.
• When the iron is in a vertical position, it will power off automatically after 8 minutes

Note:
When ironing heat reactive fabrics, it is recommended to put a layer of cloth onto the clothing you are about to iron to prevent clothes from damage.
Sort garments according to their suitable ironing temperatures. Start ironing lower temperature clothing first and adjust the temperature regulator as needed.

Cleaning

• Make sure the appliance is unplugged and the soleplate completely cool before cleaning.
• Do not use any rough or corrosive chemicals to wipe the soleplate.
• Any residue or specks can be wiped off using a cloth with vinegar or water.
• A needle or toothpick can be helpful to clean the steam holes on the soleplate.
• Avoid scratching the soleplate with hard objects.

Storage

• Ensure that the iron is completely cool and that the water tank is empty before storing.
• Keep the steam knob in the OFF position.
• Use the Velcro to wrap up the cord.
• Do not discard the cardboard in the box the iron was packaged in to prevent corrosion.
• Heat resistant mat included to enable storing the iron while it is still warm.

LX1700
Before use, please read the instruction carefully and store it properly.

Basic instructions

1. Fill the water to the “MAX” line and plug the iron into the mains.
2. There are total 4 temperature setting. Press Temperature up button or Temperature down button to select suitable temperature according to the fabric. When the temperature is going up, the selected temperature on screen will be blinking until the solephate temperature reached the selected temperature.
3. Then you can use it to iron your clothes with steam by pressing the steam activation trigger. The higher temperature setting, the larger steam output. The max steam output is about 40g/min If the temprature has not reached the selected temperature, press the steam trigger will be no use, it can avoid the water drip.
4. Auto shut off function (if any) It will swich the iron off automatically if it hasn’t been used for a period of time – usually after 8 minutes idle in the upright position and 30 second when resting on the soleplate. Move the iron slightly or press any button, it will return To the temperature that it had before being switched off.

Using vertically – for garment and fabric steaming

1. If using the Textile Brush attachment carefully slide it over the tip of iron before turning on.
2. Once plugged in, set to a high temperature, either Cotton or Max settings.
3. Wait for the blinking to turn off. Pick up the iron and hold vertically, with the tip tilted slightly forward.
4. Press the steam trigger and move the iron up and down the garment or fabric you want to steam.
5. If the steam output declines, simply tilt the iron forward into a horizontal position and then tilt back vertical to continue
   DO NOT tilt the iron upside down while using vertically.

After ironing

1. Allow to cool completely. Unplug and empty the Water Tank.
2. Clean the Ceramic Plate and the Cover Plate with a damp cloth, removing any residues.
3. Store vertically on a clean, dry, flat surface, with the cable wrapped around the Iron.

Technical Informations

• Power 220-240V-50-60Hz
• Water Tank size 320ml
• Wattage 1700W
• Model LX1700C

After each use

1. Pour out the residual water inside the water tank, turn on the steam switch, and spray the water vapor inside the machine.
2. Turn off the steam switch and pull the power cord out of the outlet.
3. Place the machine on a flat desktop and wait for the product to be properly accepted after cooling.

Nursing, cleaning and storage

1. Do not use rough or corrosive detergents or solvents.
2. Please do not immerse the steam scalding machine in water or other liquids.
3. Don’t drop, throw it or try to bend it.
4. Please do not attempt to disassemble the decomposition products.
5. Empty the water tank after each use.
6. Avoid storing products in damp places.
7. Do not close to the heat source or let the sun shine directly on the product.
8. Always ensure that the steam outlet hole is clean, scale-free and not blocked.
9. It is recommended to store the ironing machine in a flat position, such as in a drawer.

Warranty clause

When you need normal consultation, please contact us, and provide a warranty card or electronic order number, we will provide services free of charge; reflect the failure, tell the accurate fault phenomenon, we will serve you as soon as possible. We offer a one-year warranty for our products. The warranty period is calculated from the date of purchase. During the warranty period, we will replace the parts or the whole product according to the situation. The accessories of products, such as accessories, packaging, etc. are not covered by the warranty. To apply for warranty, the product mainframe must be submitted to the designated maintenance point together with the certificates that can prove the purchase date (e.g. purchase certificate, invoice or network electronic order number, etc.). The above warranty does not include the following:

1. Any damage caused by improper use (e.g. incorrect use of current, voltage, insertion of products into inappropriate sockets or man-made damage, etc.).
2. Faults caused by natural disasters.
3. Troubles caused by repairs by non-company maintenance personnel.
4. The product aging and wear caused by normal use, but it has little effect on the use function of the product.
5. The warranty service will be terminated immediately after the product has been repaired by unauthorized personnel or used parts not originally manufactured.
6. Other non-product problems and faults caused by external factors.
   Within the scope of the law, the right of final interpretation of the above clauses belongs to our company

Product warranty card

Main technical parameters

• Product model: LX1700
• Water tank capacity: 320 ml
• Steam volume: 10-40g/min

Quality +Sustainability

Your new Electrolux garment care supertool is designed with sustainability in mind.

Concept
Our key design philosophy is to achieve top performance with the lowest energy demand.
Carefully calibrated power generates more steam with less electricity, which saves on runtime, yields smoother clothing in fewer passes, delivers a longer- lasting press, rejuvenates clothing to retain newness, and ultimately keeps energy and garments from waste.

Components
You only get out what you put in, so we insist on parts made with more sustainable materials and processes. In line with the SDGs created by the UN, we use innovative materials that help both performance and planet, such as post-consumer rubber cords, repurposed plastics, and recyclable ceramicized soleplates that offer even edge-toedge heating

Package
This box is for keeps. Made of the finest recycled materials, it features an original, reusable design. An exclusive, heat-resistant inner pad enables you to safely store your garment care tool even while it’s hot. And the striking, inkless box turns into a valuable, décor-friendly storage container you will enjoy keeping in your home, and out of landfills.
Visit https://www.electroluxgroup.com/en/ to learn more about our Shape living for the better initiative

Questions comments?
Contact Smartekusa at 1-877-678-6232
12 Hinsdale Street
Brooklyn NY 11207
Electrolux is a registered trademark used under license from AB Electrolux (publ.)
A box worth keeping in the family

References

• Electrolux Group – Shape living for the better

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>