TECKNET TKM-S008 Wireless Silent Mouse User Manual

TECKNET TKM-S008 Wireless Silent Mouse

Thank you for purchasing TECKNET Wireless Silent Mouse. Please read this User Manual thoroughly before use of the product end retain It for future reference. If you have any problem using this product, please contact us by email at support@tecknelonline.com.

Package Contents

Product Overview

1. Left Button
2. Scroll Wheel
3. Right Button
4. DPI Button
5. Low Battery Indicator
6. BT1 Indicator
7. BT2 Indicator
8. USB Connectivity Indicator
9. Channel Switch Button
10. Optical Sensor
11. On/Off Switch
12. USB Receiver
13. AA Battery Compartment

System Requirement

1. USB-A Port
2. Bluetooth 3.0/ Bluetooth 5.0 enabled
3. Windows 7/8/10 or later, Android 3.2 or later, Mac OS X 10.5 or later

Specifications

1. DPI: 3 DPI levels
2. Connectivity Channels: USB receiver/ BT1/ BT2
3. Battery Type: 1 AA Battery
4. Operating Voltage: 1.5 V
5. Operating Current: 6 mA
6. Transmission Power: 0 dBm

How to Use

Using the USB Receiver

1. Open the battery cover.
2. Insert 1 AA battery into the battery compartment. Turn on the mouse.
3. Take out the USB receiver and replace the battery cover.
4. Plug the USB receiver into a USB-A port on the computer.

Using Bluetooth

1. Insert 1 AA battery and turn on the mouse.
2. To select a Bluetooth channel (BT1 or BT2), short press the Channel Switch Button, and the corresponding indicator will flash slowly.
3. Press and hold the Channel Switch Button until the indicator light flashes quickly, and the mouse will enter the Bluetooth pairing state.
4. Turn on the Bluetooth of your computer. Search and select “TK-MS008” to start pairing.
5. When the indicator light is off, the Bluetooth connection is established.

Switching Channels

1. The mouse supports 3 wireless connectivity channels: USB receiver, BT1, and BT2, by which it can be connected to three devices at the same time.
2. To switch to one of the 3 channels, short press the Channel Switch Button, and the corresponding indicator will light up for 3 seconds and then turn off. If the indicator is flashing slowly, it means that no device has been connected through this channel.

Clear Pair Record

1. Turn off the mouse.
2. Press and hold the scroll wheel. Then turn on the mouse.
3. Wait until the indicator light of BT1/BT2 flashes quickly, release the scroll wheel, and the pair records of BT1 and BT2 are cleared.

To change DPI

• Press the DPI button to cycle through 3 DPI levels. The corresponding indicator at the bottom of the mouse will flash once/twice/three times.

Low Battery Indicator

• When the battery of the mouse is low, the low battery indicator flashes.
• Please replace the battery.

Troubleshooting

1. Make sure the USB receiver is properly plugged into the USB port on the computer.
2. Make sure your computer meets the system requirement.

Precautions

1. Do not use the mouse on any reflective, transparent or uneven surfaces.
2. Use a dry and soft cotton cloth to clean the mouse.
3. Do not bend the mouse.
4. Do not look into the light from the optical sensor.
5. Do not rinse the mouse with water.

IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY

FOLLOW THESE INSTRUCTIONS.

1. RETAIN THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories, and device.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. Keep the product away from the fire to avoid an explosion.
6. For proper insertion, please observe polarity indicators (+/-).
7. Remove the batteries if the product is not going to be used for a long period.
8. Do not place the product in or near an inflammable, explosive, or hazardous object.
9. Do not operate the product if it has been damaged in any way.
10. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
11. Do not throw or shake the product.
12. Do not place the product in or near water, rain, excess moisture, or extreme heat.

Warranty

Limited 12-Month Warranty

What this warranty covers

Shenzhen Unchain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TeckNet product that the product shall be free of defects in design, assembly, material, or workmanship.

What the period of coverage is

• Unichain warrants the TECKNET product for 12 Months.

What will we do to correct problems?

• Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?

All above warranties are null and void if the TeckNet product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unchain determines that the TeckNet product has been improperly installed, altered in any way, or tampered with. The TeckNet Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty

Please contact retailers or visit TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.

Disclaimer

Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

Correct Disposal of This Product

(Waste Electrical& Electronic Equipment)

This Marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Shenzhen Unchain Technology Co., Ltd. declares that the product type TK-MS008 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://eu.tecknetonline.com/

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>