LONGINES L2.908.4.78.3 Automatic Silver Dial Men’s Watch Instruction Manual
- June 10, 2024
- LONGINES
Table of Contents
L2.908.4.78.3 Automatic Silver Dial Men’s Watch
Instruction Manual
INTERNATIONAL WARRANTY
LONGINES is delighted you have chosen a timepiece from its collection, which
lives up to the brand’s long-established know-how, based on research combined
with technical excellence and timeless elegance.
La Compagnie des Minters Longlines, Francolin S.A. grants you, with effect
from the purchase date, a twenty-four (24) month warranty on all LONGINES®
watches models and a five (5) year warranty on the automatic watches purchased
from January 1, 2021, under the terms set out in this warranty. All watch
straps and bracelets are covered by a 24-month international warranty for any
material or manufacturing defects. The LONGINES international warranty covers
defects in materials and manufacturing that exist at the time of delivery of
the LONGINES watch purchased (“defects”). The warranty takes effect only if
the warranty certificate has been dated and fully completed by an official
LONGINES dealer (“valid warranty certificate”). During the term of the
warranty and on presenting the valid warranty certificate, you are entitled to
have any defect repaired free of charge. In the event that repairs cannot
restore your LONGINES watch to full working order, La Compagnie des Minters
Longlines, Francolin S.A. undertakes to replace it with an identical LONGINES
watch or another LONGINES watch with similar characteristics. The warranty for
the replacement watch expires on the same date as the warranty for the
replaced watch.
The warranty does not cover:
- battery life;
- normal wear and tear (such as scratches on the case and/or glass; alteration of the color and/ or material of cases, straps, bracelets and chains made of leather, textile, rubber or any other non-metallic material; the PVD coating; the color of bronze);
- damage to any part of the watch resulting from unsuitable/improper use, neglect, carelessness, accidents (knocks, dents, crushing, scratches when changing the strap/bracelet, etc.), incorrect use of the watch, or failure to follow the instruction manual;
- harm of any nature whatsoever resulting directly or indirectly from using the LONGINES watch or from any operational failure, defect or lack of precision in the watch;
- a LONGINES watch having being handled by a non-approved person (for example, for the purposes of replacing the battery or carrying out servicing or repairs) or having been altered from its original state other than under the supervision of La Compagnie des Minters Longlines, Francolin S.A. Any other claims against La Compagnie des Minters Longlines, Francolin S.A., for example for any kinds of damage or harm other than those set out in this warranty, are expressly excluded, excepting statutory rights that the purchaser can assert against the manufacturer.
This manufacturer’s warranty:
- is independent of any warranty that may be provided by the vendor and for which the vendor accepts sole responsibility;
- in no way affects the purchaser’s rights against the vendor nor any other statutory right the purchaser may have against the vendor.
The Customer Service department of La Compagnie des Minters Longlines, Francolin S.A. ensures your LONGINES watch is perfectly maintained. If your watch needs servicing, entrust it to an official LONGINES dealer or an approved LONGINES Service Centre as listed on our website at www.longines.com: their servicing is guaranteed to comply with the standards of La Compagnie des Minters Longlines, Francolin S.A.
- Compagnie des Minters Longlines, Francolin S.A., CH-2610 Saint-Icier, Switzerland.
LONGINES® is a registered trademark.
We are delighted you have become the owner of a LONGINES watch. We recommend you read this instruction manual carefully before using your LONGINES watch for the first time in order to ensure its correct operation and long life. If you would like more information about your watch or if it is fitted with a complication, you can find detailed information and tutorials by going to our website at www.longlines.com/instruction-manual or by scanning the QR code.
https://www.longines.com/instruction-manual
Precautions concerning waterresistance
A watch’s water-resistance can be affected by changes caused by the gaskets
drying out, or an accidental shock to the crown. To help maintain your watch’s
water-resistance, we recommend rinsing it in soft water after any contact with
sea water and having its water-resistance checked once a year by an approved
LONGINES Service Centre. In no circumstances should you open your watch
yourself.
IMPORTANT! Never activate the time-setting crown and/or push-pieces when
the watch is underwater, and ensure that the crown and push-pieces are pushed
in or screwed down before any immersion in water.
WARNING
KEEP THE BATTERY OUT OF REACH OF CHILDREN
The battery can cause serious injuries if swallowed or placed inside any part
of the body. Seek medical attention immediately.
1 | 2 | 3 | 4 | 5 |
---|---|---|---|---|
None | Not water-resistant | No | No | No |
Water-resistant to a pressure of 3 bar (30 m)* | Yes | Yes | Yes | |
Water-resistant to a pressure of 5 bar (50 m)* | Yes | Yes | Yes | |
Water-resistant to a pressure of 10 bar (100 m)* | Yes | Yes | Yes | |
Water-resistant to a pressure of 30 bar (300 m)* | Yes | Yes | Yes |
- indication on the case back
- meaning*
- rain, washing your hands
- showering, taking a bath, washing dishes, doing housework
- swimming, snorkeling
*The water-resistance values given in meters are equivalent to pressure applied in accordance with standard ISO 22810.
COMPLICATIONS – L602
A Crown
B Hour hand
C Minute hand| D Seconds hand
E Date window
F Power reserve indicator
---|---
Hour, minute, seconds, date and power reserve display.
Screw-in crown
Some LONGINES models are equipped with a screw-in crown, which must be
unscrewed before setting the time, correcting the date or winding, by turning
it anti- clockwise. After making the settings, return the crown to position 1,
then push it back in and screw it in firmly to ensure the watch’s water
resistance.
Setting the time and stop seconds
Pull the crown out to position 3 when the seconds hand is at 60. Turn the
crown either way to the desired time display. As soon as the time is
synchronized, push the crown back into position 1.
If you have not been wearing your mechanical watch, it needs to be wound
manually through thirty revolutions or so.
Avoid any quick date correction between 20:00 and 03:00.
Quick date correction
Pull the crown out to position 2, and then turn it forward to the desired date
display. During this operation, your watch will continue to run; no time
adjustment will be required. The date needs to be corrected after every month
shorter than 31 days. Push the crown back into position 1.
The date will change when the hour hand passes midnight.
Power reserve indicator
Your watch is equipped with a power reserve indicator.
If the watch is not being worn, or is worn infrequently, the hand will
gradually move anticlockwise.
When the hand is indicating a power reserve less than 1/4, we recommend either
winding it or wearing the watch to make sure that it does not stop.
As you wind the watch, the power reserve hand will move clockwise.
LONGINES WARRANTY CARD
Scanning the QR code on your watch’s warranty card with your smartphone’s camera gives you access to the LONGINES website. There you will find the specific instruction manual for your watch, available in 33 languages, together with advice for maintaining your watch and the warranty terms.
You can also access this information via the QR code to be found in the instruction manual, or by going to: www.longines.com/instruction- manual
www.longines.com/instruction-manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>