DELUX M625PLUS Pro-Gaming Mouse User Manual

DELUX M625PLUS Pro-Gaming Mouse

Thank you for choosing our gaming mouse. To ensure the optimum performance and safety, please read the user manual carefully before you use this product.

Package Content

• Mouse×1

• Manual×1

• 1.6m Type-C cable ×1

Compatibility

Compatible with Windows 7, Windows 8 and Windows 10
Notice: Optical mouse is suitable for many kinds of surface, like wooden, paper, cloth etc. But optical mouse is not available to use on glass or smooth rubber surface.

Keys Function

① Left button
② Right button
③ Fire button
④ Scroll wheel
⑤ DPI
⑥ Forward
⑦ Backward
⑧ ON/OFF switch
⑨ Receiver

User Manual

Charging method

Connecting Type C cable to the mouse and plug it into USB port. Then the LED light below scroll wheel will turn RED and the light will extinguish when the battery is full.

Wired/Wireless mode switching

Connecting the mouse to PC with type C, then the mouse entered in wired mode. Plug the receiver into device, turn on the mouse then it can enter in wireless mode.

Code matching in wireless mode

Press ①，④ and ② in the same time for 3s can enter in code matching mode. Please insert the receiver within 10s when the mouse flashes blue. When the blue light turns to the floating RGB light and the mouse can work normally, it means code matching.

Light control hot key

Press ⑥+⑦ for 3s can turn off the light, the light will turn on when press ⑥+⑦ for 3s again.

DPI switching

Short press ⑤ to switch in the 5 DPI gears.
PMW3325: 400DPI (Red light) , 800 (Green light) , 1600 (Blue light) , 3200 (Purple light) , 5000 (Yellow light) ; the DPI defaults to 1600. The corresponding light flashes 2 times then turn to the original

PMW3335: 400DPI (Red light) , 800 (Green light) , 1600 (Blue light) , 3200 (Purple light) , 5000 (Yellow light) ; the DPI defaults to 1600. The corresponding light flashes 2 times then turn to the original light mode when DPI switching

Low voltage indication

The decorative light will extinguish when the voltage lower than 3.4V, the mouse still can work normally. The overall light flashes red indicates the mouse in low voltage condition, please charging in time.

Driver Instructions

Driver installation

Download the driver from DELUX website or get it from CD(optional) which in the package. You can set the light, DPI, parameter and macro after configuring the driver.

Driver setting

Open the driver setting interface (the device needs to be connected, otherwise the driver can’t run) to set the light, DPI, parameter and macro. The menu is on top of the interface, and the driver is available for multi-group setting.
Notice: You can set the wired parameter in wired mode, but if you want to set wireless parameter, you need switch to the wireless mode. Driver Instructions

A.Button setting

Click the set button on the right side of the interface, then you can set the left button, right button, middle button, forward button, backward button, scroll up button, scroll down button, triple shot, fire button, combination key, macro definition, disable button, DPI key, multimedia function, DPI lock or other functions. Click apply to complete the setting after the setting is successful.

B. Light setting

Click “Lighting” to set the light effect. The mouse will show different light effect when you choose different light mode. User can adjust brightness, speed, color and other parameters by your ownself. Click apply to complete the setting after the setting is successful.

C. DPI setting

Click “DPI” to modify the settings of DPI gear, the corresponding light color and DPI value. Click apply to complete the setting after the setting is successful.

PMW3335：DPI：100-16000

PMW3325 DPI：200-10000

D. Parameter setting

Click “Parameter” to set the movement speed, scroll wheel speed and double- click speed. And you can choose the corresponding rate of polling on the right side of the interface. Click apply to complete the setting after the setting is successful.

E. Macro setting

Click “Macro” to enter in the macro setting interface. First, create a macro name, then select it to click “start recording”. You can input the button you need when recording, then click “stop recording”. The operation instructions of import macro: Select the button you want to reset in button setting interface, then click “Macro definition” in the drop-down menu. Select the macro name, and click apply to complete the setting.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>