Godox VDS-M2 Supercardioid Condenser Shotgun Microphone Instruction Manual
- June 10, 2024
- Godox
Table of Contents
VDS-M2 Supercardioid Condenser
Shotgun Microphone
Instruction Manual
VDS-M2 Supercardioid Condenser Shotgun Microphone
Forward
Thank you for purchasing the Godox Supercardioid Condenser Shotgun
Microphone. This product has a built-in lithium battery, which is used for
interview, video recording, livestream, program presentation, etc. Please read
this manual carefully before using to make sure the correct operation and
exert the optimum function.
Product Features
- High directional shotgun microphone
- Signature broadcast-quality sound
- Portable size, powerful functions
- Selectable high-pass filter, precise gain control, high-frequency boost, pad and safety channel functions
- User-favor accessories, stable and noise reduction
- High directional super cardioid pickup pattern, flat frequency response
Warning
Do not disassemble. Should repairs become necessary, this product must be sent
to an authorized maintenance center.
Always keep this product dry. Do not use in rain or in damp conditions.
Keep out of reach of children.
Do not use the flash unit in the presence of flammable gas. In certain
circumstance, please pay attention to the relevant warnings.
Do not leave or store the product if the ambient temperature reads over 50°C .
Please carefully read and observe the warnings and instructions provided by
the manufacturer.
Structure of Product
- -20dB Pad/Safety Channel Button
- High-pass Filter Button
- Power/High-ferquency Boost Button
- Multi-functional TYPE-C Output (Charging Port/Audio Output)
- Gain Control Dial(1-15)
- Shock-absorbing Bracket
- Cable Management
- Cold Shoe
- 3.5mm Auto-sensing Output
Dimension of Product
**Frequency Response Polar Pattern**
What’s in the Box
Instructions for Buttons
2048 Pad/Safety Channel Button: -20d8 pad and safety channel funciions.
High-pass Filter Button: 75+ high-pass filer and 160+ high-pass filer
Power/High- frequency Boost Button: power ON/OFF and engage high
frequency boost.
Gain Control Dial: turn the select dial to adjust gain value from 110 15,
the number 1 s the minimum gain, and the number 15 s the maximur gain
Operation Instructions
-
Precise Gain Control
The microphone tail with Gain Control Dil for turning and adjusting the gain value 1-15 to select and match your device and environment. -
Power/High-frequency Boost Button
The bottom buttonis the Power/High-frequency Boost Button. By default the microphone wil automatically turn on when connected to the device, and tum off when disconnected from the device. You can also manually tun on/off by pressing and holding this button for 3 seconds. Heres also a high frequency boost or enhancing clarity and detail in your recording, short press this button to engage the high frequency boost (right LED williluminate), and short press again to disengage the high frequency boost right LED will tun off). -
High-pass Filters
The middie button i High-pass Fiters Button, press this button to switchto engage the 75Hz high-pass fiter let LED williluminate) and 150z high-pass fiter (right LED wil iluminate), press third time to disengage high-pass fiter function (both LEDS willtur of). There are two high-pass fiters avallable, which cut frequencies below 5Hz and 150Hz respectively 1o help mitigate wind noise and otherlow frequency rumble.
Note: The 150H fiterwilcut more bass frequencies, so thisis suitable inmare adverse conditons. -
-2008 Pad and safety channel
Press the top button once to engage the -20d8 left LED willliminate), press once more to engagethe safety channel (ift LED will tun off,right LED will lluminate), press button third time 1o engageboth the -2008 and safety channel (both LEDS wil iluminate), press fourth time 1 disengage both functions (both LEDS will tun off).
The -20d8 pad function makes sure your audio s clear and distortion-free when recording loud sound sources. While the safety channel records a second track at -20d8 that can subsiitute for the main track in post-production f it distorts. -
3.5mm output and auto-sensing feature
The 3 5mm output automatically detects whether the microphone s plugged nto a TAS.
input (most cameras) or a TRAS input (most smartphones and tablets) and switches to accommodate without adapters. -
USB output
Plug tnto the computer,tablet or smartphone to conver it into a USB microphone, it will also stert charging automatically. You can also plug headphones into the 3.6mm output to monitor the audio.
Battery
The microphone features an in-buit thium battery that provides 25 hours of
recording and charges via USB-C (from empty o fullin 3.5 hours).
Instructions for Indicator Lights
When this microphone is turned on and working normally, the working indicator
light is always Green, and the high-pass filter button indicator light and the
-20dB Pad/Safety channel button indicator light are ail green;
The top LED is the peak warning light. It will flash red when the signal is
clipping, indicating that you need to either apply the -20dB pad and/or safety
channel, or lower the voice.
The Power LED Indicator displays battery power status, constant on green means
battery capacity is over 10%, flashing red means battery capacity is below
10%.
When the microphone connected to the power source, the LED indicates the
charging status; when connected to the computer, tablet and smartphone, blue
means charging, green means fully charged; when connected to the power pack or
USB power adapter, flashing green means charging, constant on green means
fully charged.
Technique Data
| Model | VDS-M2 |
|---|---|
| Pick-up Sound Mode | Supercardioid |
| Frequency Range | 20Hz-20KHz |
| Signal to Noise Ratio | 79dBA |
| Mic Sensitivity | -34±2dB |
| High Pass Filter Frequency | 75Hz,150Hz |
| Battery Capacity | 500mAh |
| Working Temperature | -10°C-50°C |
| Dimension | Diameter: 22mm Length: 173.4mm |
| Weight | 156g, Microphone(96g)+Bracket(60g) |
Maintenance
Avoid sudden drops. The device may fail to work after strong shocks, impacts,
or excess stress.
Keep dry. The product isn’t water-proof. Malfunction, rust, and corrosion may
occur and go beyond repair if soaked in water or exposed to high humidity.
Avoid sudden temperature changes. Condensation happens if sudden temperature
changes such as the circumstance when taking the product out of a building
with higher temperature to outside in winter. Please put the product in a
handbag or plastic bag beforehand.
Keep away from strong magnetic field. The strong static or magnetic field
produced by devices such as radio transmitters leads to malfunction.
Changes made to the specifications or designs may not be reflected in this
manual.
Declaration of Conformity:
GODOX Photo Equipment Co,Ltd. hereby declares that the This equipment are
in compliance with the essential requirements and other relevant provisions of
EU Directive 2014/30/EU. They are allowed to be used in all EU member states.
For more information of DoC, Please click this web link:
http://www.godox.com/DOC/Godox.VDS-M2_DOC.pdf
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Warranty
Dear customers,as tis warrany card isan impartant erficat t appyfo our
mainenance sence, plase il n o olowing orn ncoordnaton Wi the selr and sae-
keep . Thank you!
| Product Information | Model | Product Code Number |
|---|---|---|
| Customer Information | Name | Contact Number |
Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note
Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance
Information (see below for further information). Other products or accessories
(e.g. promotional items,giveaways and additional accessories attached,etc.)
are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to
the relevant Product Maintenance Information. The warranty period is
calculated from the day(purchase date) when the product is bought for the
first time,and the purchase date is considered as the date registered onthe
warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product
distributor or authorized service institutions. You can also contact the Godox
after-sale service call and we will offer you service. When applying for
maintenance service, you should provide valid warranty card. If you cannot
provide valid warranty card, we may offer you maintenance service once
confirmed that the product or accessory is involved in the maintenance scope,
but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the
following cases:
- The product or accessory has expired its warranty period;
- Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;
- Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment;
- The original identifying information of product or accessory is modified, alternated, or removed;
- No valid warranty card;
- Breakage or damage caused by using illegally authorized, nonstandard or non-public released software;
- Breakage or damage caused by force majeure or accident;
- Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to
the following Product Maintenance Information:
Product Type| Name| Maintenance Period(month)| Warranty
Service Type
---|---|---|---
Parts| Product Main Body| 12| Customer sends the product to designated site
Battery| 3| Customer sends the product to designated site
Charger, Power Cable,Sync Cable, Electrical Parts etc.| 12| Customer sends the
product to designated site
Other Items| Battery Case, Windscreen Foam, Wind Cap, Locking Device, Lanyard,
Tie, Velcro Tape, Clip, Bag, Package etc.| No| Without warranty
Godox After-sale Service Call
**0755-29609320-8062http://weixin.qq.com/r/vEPI0F7ERgM5rRqz9xau
Follow Wechat Official Account
GODOX Photo Equipment Co., Ltd.
Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,
Shenzhen 518103, China
Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com
godox.com
Made in China**
Documents / Resources
|
Godox VDS-M2 Supercardioid Condenser Shotgun
Microphone
[pdf] Instruction Manual
VDS-M2 Supercardioid Condenser Shotgun Microphone, VDS-M2, Supercardioid
Condenser Shotgun Microphone, Condenser Shotgun Microphone, Shotgun
Microphone, Microphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>