Vzense DCAM550-P ToF Camera User Guide
- June 10, 2024
- Vzense
Table of Contents
Vzense DCAM550-P ToF Camera
DCAM550-P ToF (Time-of-Flight) Camera
The DCAM550-P is a ToF (Time-of-Flight) camera that is designed to provide
depth sensing capabilities. It is equipped with a laser emitter, RJ45 DC Jack
6Pin Connector, ToF Camera Lens, LED, and Reset Button. The camera is
manufactured by Vzense and is available for purchase on their website.
Specification
Usage Instructions
To use the DCAM550-P ToF camera, follow these simple steps:
- Connect the camera to your computer or device using the RJ45 DC Jack 6Pin Connector.
- Ensure that the blue LED on the camera is on, indicating that it is connected to Ethernet.
- Place the camera in the desired location and adjust the ToF Camera Lens to capture the desired field of view
- The camera will emit a laser and capture depth information in real-time.
- You can use the captured depth information for a variety of applications, such as 3D scanning, motion tracking, and gesture recognition.
For more detailed information on using the DCAM550-P ToF camera, please refer to the user manual provided by Vzense.
Get to know your DCAM550-P
- Blue LED blinking: Ethernet Broadcast, no connection
- Blue LED on: Ethernet connected
What’s inside
- ethernet cable (3meters )
- power cable (2meters)
- 6pin multi-functional cable (1meter)
LASER SAFETY
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice No. 56, dated May 8, 2019.
Hardware Connection
-
Connect the camera to your host PC via the ethernet cable
-
Supply 12-24V DC power to the camera via the DC cable
-
Set the camera’s IP address in the same segment as the host PC
(Default IP address of the camera is 192.168.1.101, you can change the camera’s IP address from VzenseConfigTool) -
Run VzenseUTool, scan and connect the device
-
Explore the device via VzenseUTool and VzenseConfigTool, referring to Vzense_UTool_User_Guide and Vzense_ConfigTool_User_Guide
Note: DCAM550-U supports PoE+ working mode. PoE+ injectors recommendation: EWPAM2NPoE+ from H3C; TL-PoE+170S from TP LINK
Download Link
https://github.com/Vzense (For worldwide users)
https://gitee.com/Vzense (For users in China)
From the links above, you can download:
- SDK(C/C++ and ROS SDK included)
- VzenseUTooI and Vzense_UTool_User_Guide
- VzenseConfigTool and Vzense_ConfigTool_User_Guide
More documents could be downloaded from our website: https://www.vzense.com
Support
Still need help?
You could send us email: reach out to our technical support team by email:
info@vzense.com, we will make sure all inquiries
will be responded within 24 hours.
Or leave us a voice message by calling to : +1(650)336-8158.
Want more products information?
Welcome to visit our website to learn more products, we also have industrial
grade DCAM560C ToF+RGB industrial grade cameras, and more coming each 6
months…
Need customized design?
Yes, we are specialized in whole system customization design.
Free consulting and meeting could be scheduled by sending us email:
info@vzense.com
Please visit our website for more info
www.vzense.com
We will reply your email within 24 hours
info@vzense.com
Please follow us
FCC STATMENT
This device complies with Part 15 of the FCC Rules and Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
1 YEAR WARRANTY
We want to ensure you have the best product and service, if you are not satisfied with our product, please contact us within 7 days since the date of your purchase or receiving and we will refund you after product is shipped back to us. In case you encounter defective product, you could return product to us for repair or exchanging of a new one, when you inform us no later than one month after 1 year warranty period expires.
- Company Name: Qingdao Vzense Technology Co., Ltd.
- Address: Room 3303, No. 393 Songling Road, Laoshan District, Qingdao City, China
- Website: www.vzense.com
- Tel: +86-189-5426-5263
- China: +1-650-336-8158(USA)
- Service Email: info@vzense.com
References
- Leading Provider of Industrial ToF Cameras and Solutions
- Vzense: Boost Your Business With 3D
- Vzense · GitHub
- Leading Provider of Industrial ToF Cameras and Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>