Vzense DCAM550-E ToF Camera User Guide
- June 11, 2024
- Vzense
Table of Contents
Vzense DCAM550-E ToF Camera
Get to know your DCAM550-E
Blue LED blinking: Ethernet Broadcast, no connection
Blue LED on: Ethernet connected
Specification
What’s inside
- an ethernet cable (3meters, Aviation plug to RJ45)
- a multi-functional cable (2meters, Aviation plug)
LASER SAFETY
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice No. 56, dated May 8, 2019.
FCC
This device complies with Part 15 of the FCC Rules and Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
1 YEAR WARRANTY
We want to ensure you have the best product and service, if you are not satisfied with our product, please contact us within 7 days since the date of your purchase or receiving and we will refund you after product is shipped back to us. In case you encounter defective product, you could return product to us for repair or exchanging of a new one, when you inform us no later than one month after 1 year warranty period expires.
Hardware Connection
- Connect the camera to your host PC via the ethernet cable
- Supply 12-24V DC power to the camera via the multi-functional cable
- Set the camera’s IP address in the same segment as the host PC (Default IP address of the camera is 192.168.1.101, you can change the camera’s IP address from VzenseConfigTool)
- Run VzenseUTool, scan and connect the device
- Explore the device via VzenseUTool and VzenseConfigTool, referring to Vzense_UTool_User_Guide and Vzense_ConfigTool_User_Guide
Note: DCAM550-E supports PoE+ working mode. PoE+ injectors recommendation: EWPAM2NPoE+ from H3C; TL-PoE+170S from TP LINK
Download Link
https://github.com/Vzense (For worldwide users)
https://gitee.com/Vzense (For users in China)
From the links above, you can download:
- SDK(C/C++ and ROS SDK included)
- VzenseU Tool and Vzense_U Tool User Guide
- Vzense Config Tool and Vzense Config Tool User Guide
More documents could be downloaded from our website: https://www.vzense.com
Support
Still need help?
You could send us email:
reach out to our technical support team by email:
info@vzense.com, we will make sure all inquiries
will be responded within 24 hours.
Or leave us a voice message by calling to : +1(650)336-8158.
Want more products information?
Welcome to visit our website to learn more products, we also have industrial
grade DCAM560C ToF+RGB industrial grade cameras, and more coming each 6
months…
Need customized design?
Yes, we are specialized in whole system customization design.
Free consulting and meeting could be scheduled by sending us email:
info@vzense.com
Please visit our website for more info
We will reply your email within 24 hours info@vzense.com
Company Name: Qingdao Vzense Technology Co., Ltd.
Address: Room 3303, No. 393 Songling Road, Laoshan District, Qingdao City,
China Website: www.vzense.com
Tel: +86-189-5426-5263(China)
+1-650-336-8158(USA)
Service Email: info@vzense.com
References
- Leading Provider of Industrial ToF Cameras and Solutions
- Vzense: Boost Your Business With 3D
- Vzense · GitHub
- Leading Provider of Industrial ToF Cameras and Solutions