tuya DC-68 Solar Underground Light Owner’s Manual

tuya DC-68 Solar Underground Light Owner’s Manual

Product parameters

Notice

1. When the lamp is not working or the working time is short, please place the lamp in a location where the sun is shining directly to charge for 2 days. Don’t turn on the lamp during the process. If it still doesn’t work or working time is short, please contact the factory.
2. The product has light sensor, please use it where there is no light.
3. Rainy weather will affect the charging of lamp, the working time will be reduced.
4. Don’t install the lamp in a place that is easily immersed in water.
5. Don’t install the lamp in eaves, tree bottoms and other environments where there is no direct sunlight.
6. The lamp has built-in battery, don’t throw away directly.

Check Remarks before use

1. Place lamp under sunshine for 4-6h after you get goods and turn on, because it only reserve part energy in battery.
2. The less time to charge under sunshine, the less time to work at night,Working time depends on surrounding,geography latitude,seasons etc.
3. There is the difference of working time and brightness extent for different light, please note.
4. Please clean the panel and in case of poor charging effect if it happen to have obstacle in panel in using.

Dimensions

Product Manual

1. CW&WW model:Press switch first, turn on in 100% bright, press switch second time,half bright,Press switch for 3 seconds, close.
2. RGB model: Press switch first, RGB change gradually, press second time,fix green, Press third time,fix red light, press forth time,fix blue light.
3. Smart model:Press switch to open light, then operate the device through mobile phone app. (Please check operation details in 《Smart APP Operation manual》 )

Light control

Installment step

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>