Godox UMic10 USB Cardioid Condenser Microphone Instruction Manual

June 10, 2024
Godox

Godox UMic10 USB Cardioid Condenser Microphone

Godox-UMic10-USB-Cardioid-Condenser-Microphone-product-
img

Forward
Thank you for purchasing! This is a Unidirectional Condenser Microphone with a shock mount and windproof net, USB connected to a computer, used for professional computer recording, web conferences, chatting, etc. Please read the Instruction Manual carefully before using it to make sure of the correct operation and usage.

Feature

  • The cardioid-directed condenser pickup has better reception and captures human voice accurately while attenuating sounds from other directions.
  • The anti-interference magnetic ring prevents the interference caused by the current impact of plugging and unplugging the cable as well as electromagnetic interference in the air, reducing high-frequency noise, thus making the transmission more stable.
  • Built-in Broadcast-quality sound head has a high sensitivity to accurately pick up human voice signals in different ranges.
  • Upgraded active noise reduction, professional studio-quality clear sound.
  • USB cable and anti-interference magnetic ring can ensure stable transmission, plug-and-play.
  • Widely compatible with Win7/Win8/Winl O / Mac OS.
  • Applicable to 99% of the live broadcast software on the market, and scenes such as karaoke, gaming, live broadcast, chatting, and recording.
  • The rotatable cantilever bracket can be adjusted to the desired angle conveniently.

Warning

  • This product is a high-precision instrument, please avoid falling, collision or pounding.
  • Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center.
  • Always keep this product dry. Do not use in rain or damp conditions.
  • Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid or dusty.
  • Keep out of reach of children.
  • Do not use in flammable and explosive environments. Pay attention to the relevant warning signs.
  • Do not leave or store the product if the ambient temperature reads over 60C.
  • Compatible with most mainstream models with Type-C interface on the market.
  • Please read carefully and follow the warnings or instructions provided by the manufacturer.

Declaration of Conformity:
GODOX Photo Equipment Co, Ltd. hereby declares that This equipment is in compliance with the essential requirements and other relevant provisions of EU Directive 2014/30/EU. They are allowed to be used in all EU member states. For more information on Doc, Please click this web link: http://www.godo.com/DOC /Godox_UMICl 0_DOC.pdf.

Parts

Godox-UMic10-USB-Cardioid-Condenser-Microphone-fig-2

  1. Microphone
  2. iron Net
  3. Wind Cap
  4. Mute Button
  5. Cantilever Shock Mount
  6. Shock Cord
  7. Volume Adjustment Button+
  8. Volume Adjustment Button-
  9. 5/8 Adapter plug
  10. adapter Knob
  11. Lock Sleeve
  12. Type-c Jack
  13. 3.5mm Earphone Jack

What’s in the Box

USB Cardioid Condenser MicrophoneUMic10

Godox-UMic10-USB-Cardioid-Condenser-Microphone-fig-3

Power Supply
Connect the microphone to the computer or external power with a Type-C cable, it will be powered by the computer or the phone.

Mute Function
Short press the Mute Button. to mute/unmute. The LED will be red when muted and blue when unmuted, in each case the microphone will not and will pick up respectively.

Earphone Volume Adjustment

  • Press. button to increase the earphone volume until maximum.
  • Press. button to decrease the earphone volume until mute.

Frequency Response Diagram

Godox-UMic10-USB-Cardioid-Condenser-Microphone-fig-7

Cardioid Directivity

Godox-UMic10-USB-Cardioid-Condenser-Microphone-fig-8

Connection Guide

  1. Connect a microphone to a computer with USB Data Cable.
  2. Connect headphones or earphones to a 3.5mm Audio Jack.
  3. Connect a microphone to a mobile phone with Type-C to Type-C Data Cable.

Guide for Computer Recording
Windows Settings (take Winl Oas an example)

  • Step 1. Click Start and go to Settings of computers
  • Step 2. Select Sound
  • Step 3. Select UMicl 0 Speaker

Mac OS Settings

  • Step 1. Click the Recording Icon on the Mac desktop
  • Step 2. Select Sound
  • Step 3. Select Microphone Output

Note: The above operation is based on the microphone already connected to the computer.

Technical Data

Model UMicl0
Directivity Unidirectional
Signal-to-Noise Ratio >70dB
Impedance 50/80 OHM
Microphone Frequency Response 50Hz~20KHz
Microphone Sample Rate 48KHz at 24Bit
Microphone Sensitivity -35±3dB(0dB=lV/Pa lKHz)
Earphone Sample Rate 48KHz at 24Bit
Earphone Output Power l0mW/32O
Earphone Frequency Response 20Hz~20KHz
Power Consumption 5V/200mA (MAX)
USB Compatibility USB1.l/USB2.0
Support Operating System Win7/Win8/Winl0 / Mac OS

Product Diameter

| (Do not support Windows XP)

139.895246.98mm

Microphone Weight| 369g
Cantilever Bracket Weight| 102g

Maintenance

Keep dry. This product is not water-proof. Malfunction, rust. and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity. Avoid sudden temperature changes. Condensation happens in sudden temperature changes such as the circumstance when taking the product out of a building with a higher temperature to outside in winter. Please put the product in a handbag or plastic bag beforehand. Keep away from a strong magnetic field. The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction.

FCC STATMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Product Information Model Product Code Number

Customer Information

| Name| Contact Number
Address

Seller Information

| Name
Contact Number
Address
Date of Sale
Note

Note: This form shall be sealed by the seller.

!Applicable Products!
The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (e.g. promotional items. giveaways and additional accessories attached.etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time. and the purchase date is considered the date registered on the warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered our obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases: (1). The product or accessory has expired its warranty period; (2) · Breakage or damage caused by inappropriate usage, maintenance, or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by an external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding, and damp environments, etc; (3) · Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alteration, addition, and detachment; (4). The original identifying information of the product or accessory is modified, alternated, or removed; (5). No valid warranty card; (6). Breakage or damage caused by using illegally authorized, nonstandard, or non-public released software; (7) · Breakage or damage caused by force majeure or accident; (8) · Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories, and software that are beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion, and consumption are not breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product        Name Maintenance

Type Period(month)

| Warranty Service

Type

---|---
Parts| Product Main Body| 12| Customer sends

the product

to designated site

Battery

|

3

| Customer sends

the product

to designated site

Charger, Power Cable.Sync Cable, Electrical Parts, etc.|

12

| Customer sends

the product

to designated site

Other Items| Battery Case,

Windscreen Foam,

Wind Cap, Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package, etc.

|

No

| Without warranty

Godox After-sale Service Call 0755-29609320-8062

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals