ECHO WT-1610 Pro Line Head Kit Instruction Manual
- June 10, 2024
- ECHO
Table of Contents
INSTRUCTION SHEET
Pro-Line Head KIT 99944400000
Instruction Manual
WT-1610 Pro Line Head Kit
Subject: Pro-line Head Kit
Kit: 99944400000
Model: WT-1610, WT-1610T, WT-1610HSP, WT-1610SP
WARNING
Before inspecting or servicing any part of this machine, shut off power
source, disconnect spark plug wire from spark plug and make sure all moving
parts have come to a complete stop.
SAFETY
Your safety and the safety of others is important.
Valuable safety messages are provided in these instructions. Please carefully
read and obey these messages.
- Improper use or abuse of the Trimmer Line Holder can result in serious injury.
- Do not install or operate the Trimmer Line Holder on the Wheeled Trimmer with any safety device or guard removed, incorrectly installed, changed, inoperative or in poor condition.
- Do not use bent, fractured, dulled or damaged Trimmer Line Holders.
- Do not operate the Wheeled Trimmer in the vicinity of bystanders. Keep a minimum distance of 100 feet away from people and pets.
- Do not allow children or an inexperienced operator to use the Wheeled Trimmer.
- Wear safety glasses at all times during operation.
- Inspect the surrounding area thoroughly before use. Remove all foreign objects before operation.
- Avoid hitting stones, wire, bottles, rocks, glass, cans, metal of any kind and any other foreign objects.
- Always keep the Trimmer Line Holder maintained in good working condition.
INSTALLATION
- Inspect kit to verify all items were received.
- Remove the front cover. Insert a 9/16″ open end wrench into trimmer body, rotating the mow ball as necessary to engage the trimmer shaft. Turn the trimmer head weldment counterclockwise to remove.
- Remove the existing trimmer head disk and insert the Trimmer Line Holder onto the trimmer spindle.
- Replace the trimmer head weldment and twist clockwise to tighten. Remove wrench and replace front cover before operation.
INSTALLING/REMOVING TRIMMER STRING
- Slide one end of the trimmer string through the line holder along one side of the raised tab (Figure 1).
- Loop the string around the raised tab and slide through the other side of the line holder.
- Make sure the string ends are even and pull to ensure the string is snug behind the raised tab.
- To remove the string, use a screwdriver (or similar object) to loosen the string from behind the raised tab. Pull to remove the string from the line holder.
PRO-LINE HEAD KIT, PN 99944400000
ITEM| PART NUMBER| DESCRIPTION| QTY
1| YH449000070| NUT. 5/16″ NYLOCK| 4
2| YH434000050| BOLT. 5/16 X 3/4″ CRG| 4
3| YH479002250| HOLDER. LINE| 2
4| YH479002260| PLATE. LINE HOLDER| 1
ECHO Incorporated
400 Oakwood Road
Lake Zurich, IL 60047
www.echo-usa.com
1-800-432-ECHO (3246)
99922205595 (Rev 061022)