Sharkoon BW120 SilentStorm PWM FAN Instruction Manual
- June 10, 2024
- sharkoon
Table of Contents
Sharkoon BW120 SilentStorm PWM FAN
Product Information
BW120 PWM FAN
- Bearing Type: Fluid Dynamic Bearing
- Dimensions: 120 x 120 x 25 mm
- Weight: 132 g (incl. fixed cable)
- Fan Connector: 4-Pin PWM
- Fan Cable Length: 450 + 100 mm
- Rated Voltage: 12 V
- Rated Current: 0.15 A
- Rated Power: 1.8 W
- Start Voltage: 7 V
- Minimum MTBF: 50,000 hours
Product Usage Instructions
BW120 PWM FAN
- Connect the fan to a 4-Pin PWM or a 3-Pin fan connector.
- If required, connect the fan to other fans.
- If required, use the swappable vibration damper for noise reduction.
- Ensure appropriate handling of the fan to avoid potential loss of data as Sharkoon assumes no liability for inappropriate handling.
Specifications
General:
- Fan Speed: 450~1,400 rpm ± 10%
- Bearing Type: Fluid Dynamic Bearing
- Max. Airflow: 89.06 m³/h
- Max. Air Pressure: 1.31 mm-H2O
- Max. Noise Level: 28 dB(A)
- MTBF:
Min. 50,000 Hours
- Dimensions (L x W x H): 120 x 120 x 25 mm
- Weight incl. Fixed Cable: 132 g
Cables and Connectors:
- Fan Connector: 4-Pin PWM
- Fan Cable Length: 450 + 100 mm
- Electrical Specifications:
- Rated Voltage: 12 V
- Rated Current: 0.15 A
- Rated Power: 1.8 W
- Start Voltage: 7 V
Connect Fan
Swappable Vibration Damper
Legal Disclaimer
Legal Disclaimer For potential loss of data, especially due to inappropriate handling, Sharkoon assumes no liability. All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at Sharkoon, the design and specifications are subject to change without prior notice. National product specifications may vary. All rights reserved, especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means. Infringements will lead to compensation. All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical modifications reserved.
Disposal
Disposal of your old products Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU. Please be informed about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences to the environment and human health.
Sharkoon Technologies GmbH Grüninger Weg 48
35415 Pohlheim
Germany
© Sharkoon Technologies 2023
info@sharkoon.com
www.sharkoon.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>