CHARKEE W550XH1220MM Extra Thick LED light User Manual
- June 4, 2024
- CHARKEE
Table of Contents
CHARKEE W550XH1220MM Extra Thick LED light
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, and refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.
WARNING Risk of Fire and Electric Shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
- Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer and all other parts for damage, if any partis damaged the product should not be used.
INSTALLATION SAFETY
- Inspect the product immediately upon receipt for transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tile surfaces in case the drill slips.
CAUTION
The light source of this product is non-changeable light diodes (LED). Do not
disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this manual
are not meant to cover all possible conditions and situations that may occur.
It must be understood that common sense, caution and care are factors that
can’t be built into any product. These factors must be supplied by the
person(s) caring for and operating the fixture. Do not install this fixture in
hazardous locations.
MODEL (W550XH1650MM/W550XH1220MM)
PRODUCT DESCRIPTION
CHECK PRODUCT LIST AFTER OPENING THE PACKAGE
- LED Lighted Mirror: 1pcs
- Installation Manual: 1pcs
- Z-bar: 1pcs
- Wall Mount Screw: 4pcs（One as spare parts）
- Drywall Anchor: 4pcs（One as spare parts）
- Wall Mount Screw: 4pcs（One as spare parts）
- Drywall Anchor: 4pcs（One as spare parts）
Size: W550XH1220MM
Size: W550XH1650MM
All diagrams are for reference only. All model dimensions and proportions position will vary
INFORMATION
INSTALLATION PROCESS
- On/Off
- Long Press for Brightness Changing
- Step 1: Use an I-Beam level to mount the included mounting bracket with 3 screws (Use anchor when it’s installed on drywall, concrete or tile surface)
- Step 2: Hang the mirror to the mounting bracket.
- Step 3: Connect the wire, and plug it to the socket.
Warning: Always switch off the electrical supply at the mains during installation and maintenance. Do not switch on the electrical supply at the mains until the end of the installation.
MODEL (W550XH1220MM)
PRODUCT DESCRIPTION
CHECK PRODUCT LIST AFTER OPENING THE PACKAGE
- LED Lighted Mirror: 1pcs
- Installation Manual: 1pcs
- Z-bar: 1pcs
- Wall Mount Screw: 4pcs（One as spare parts）
- Drywall Anchor: 4pcs（One as spare parts）
- Wall Mount Screw: 4pcs（One as spare parts）
- Drywall Anchor: 4pcs（One as spare parts）
Size: W550XH1220MM
All diagrams are for reference only. All model dimensions and proportions position will vary.
INFORMATION
All diagrams are for reference only. All model dimensions and proportions position will vary.
INSTALLATION PROCESS
- On/Off
- Long Press for Brightness Changing
- On/Off
- Single Press for Color Temperature Changing & Long Press for Brightness Changing
- Step 1: Use an I-Beam level to mount the included mounting bracket with 3 screws (Use anchor when it’s installed on drywall, concrete or tile surface).
- Step 2: Hang the mirror to the mounting bracket.
- Step 3: Plug the wire to the socket.
Warning: Always switch off the electrical supply at the mains during installation and maintenance. Do not switch on the electrical supply at the mains until the end of the installation.
MODEL (W550XH1220MM)
PRODUCT DESCRIPTION
CHECK PRODUCT LIST AFTER OPENING THE PACKAGE
- LED Lighted Mirror: 1pcs
- Installation Manual: 1pcs
- Z-bar: 1pcs
- Wall Mount Screw: 4pcs（One as spare parts）
- Drywall Anchor: 4pcs（One as spare parts）
Size: W550XH1220MM
All diagrams are for reference only. All model dimensions and proportions position will vary.
INFORMATION
INSTALLATION PROCESS
- On/Off
- Long Press for Brightness Changing
- Step 1: Use an I-Beam level to mount the included mounting bracket with 3 screws (Use anchor when it’s installed on drywall, concrete or tile surface).
- Step 2: Hang the mirror to the mounting bracket.
- Step 3: Plug the wire to the socket.
Warning: Always switch off the electrical supply at the mains during installation and maintenance. Do not switch on the electrical supply at the mains until the end of the installation.
LED Mirror Power Source FAQ
Scenario 1
This is the most common way to connect the mirror. The LED light is controlled
by the built-in touch switch on the mirror. *The LED brightness is dimmable.
Internal Power Flow Diagram
Documents / Resources
|
CHARKEE W550XH1220MM Extra Thick LED
light
[pdf] User Manual
W550XH1220MM, W550XH1650MM, W550XH1220MM, W550XH1220MM Extra Thick LED light,
Extra Thick LED light, Thick LED light, LED light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>