Dunlop DD95FW Cry Baby Daredevil Fuzz Wah Pedal User Manual
- June 10, 2024
- DUNLOP
Table of Contents
Dunlop DD95FW Cry Baby Daredevil Fuzz Wah Pedal
Product Information
The product is a wah/fuzz pedal that allows the user to toggle between a wah
effect and a fuzz effect. It has external and internal controls, including a
WAH/FUZZ WAH switch to toggle the fuzz effect on/off, a FUZZ OUTPUT knob to
adjust the pedal volume when fuzz wah mode is engaged, and a GAIN knob to
adjust the
intensity of the fuzz effect. The pedal has various specifications, including
impedance, noise floor, max gain, resonant frequency, bypass type, current
draw, and power supply.
Product Usage Instructions
- Connect your instrument to the input jack of the pedal.
- Connect the output jack of the pedal to your amplifier or other audio equipment.
- Turn on your amplifier or other audio equipment.
- Turn on the pedal by pressing the footswitch.
- To use the wah effect, set the WAH/FUZZ WAH switch to “WAH ONLY”.
- Rock the foot pedal back and forth to create a sweeping wah effect.
- To use the fuzz effect, set the WAH/FUZZ WAH switch to “FUZZ-WAH ONLY”.
- Adjust the FUZZ OUTPUT knob to control the volume when using the fuzz wah mode.
- Adjust the GAIN knob to control the intensity of the fuzz effect.
- Experiment with different settings to find your desired tone.
- To turn off the pedal, press the footswitch again.
DAREDEVIL CRY BABY® FUZZ WAH DD95FW
EXTERNAL CONTROLS
- WAH/FUZZ WAH switch toggles fuzz effect on/off
INTERNAL CONTROLS
- FUZZ OUTPUT knob adjusts pedal volume when fuzz wah mode is engaged
- GAIN knob adjusts intensity of fuzz effect
BASIC OPERATION
POWER
The Cry Baby® Daredevil™ Fuzz Wah is powered by one 9-volt battery (accessed
via underside of pedal), the Dunlop ECB003 9-volt adapter, or the DC Brick™,
Iso-Brick™, and Mini Iso-Brick™ power supplies.
OPERATION
-
Run a cable from your guitar to DD95FW’’s INSTRUMENT jack
and run another cable from the DD95FW’s AMPLIFIER jack to your amplifier. -
Flip external WAH/FUZZ WAH switch to its WAH position to use the wah effect by itself; flip the switch to its FUZZ WAH position to engage the the fuzz Wah effect.
-
To access the internal VOLUME and GAIN controls, remove the bottom plate.
-
Rotate the internal VOLUME knob clockwise to increase overall volume when the fuzz wah mode is engaged or counterclockwise to decrease it.
-
Rotate the internal GAIN knob to increase the intensity of the fuzz effect or counterclockwise to decrease it.
-
Push the toe of the pedal down until you feel a “click” to turn the pedal on/off.
-
Rock your foot back and forth on the pedal to hear the vocal, expressive tones that the Cry Baby Wah is famous for.
SPECIFICATIONS
| IMPEDANCE | WAH ONLY | FUZZ-WAH ONLY |
|---|---|---|
| Input | 55 kW | > 17 kW |
| Output | 1 kW | > 2.5 kW |
| NOISE FLOOR | ||
| Heel Down | -98 dBu | – 86 dBu |
| Toe Down | -86 dBu | – 70 dBu |
MAX GAIN
| |
Heel Down| +17.2 dB| +55 dB
Toe Down| +23.5 dB| +63 dB
| |
Max Output Level| +11.5 dBu| +11.5 dBu
RESONANT FREQUENCY| |
Heel Down| 375 Hz| 375 Hz
Toe Down| 2.1 kHz| 2.1 kHz
BYPASS – TRUE HARDWIRE| |
Current Draw| < 1 mA| < 1 mA
Power Supply| 9 VDC| 9 VDC