Dunlop JHMS1 Authentic Hendrix Shrine Series Fuzz Face Distortion User Manual

JHMS1
Authentic Hendrix™
‘68 Shrine Series Fuzz Face® Distortion

JHMS1 Authentic Hendrix Shrine Series Fuzz Face Distortion

This special edition of the Fuzz Face Distortion pays tribute to the legendary Jimi Hendrix with a custom finish that remixes prolific and celebrated rock artist John Van Hamserveld’s famous 1968 Shrine Auditorium concert poster art. Packed into an MXR mini housing, this pedal captures both the aggressive silicon-based crunch that Jimi Hendrix used in the latter part of his career and the the warm, smooth saturation of germanium-based fuzz that he used in the early years.

External Controls

1. BUFF switch toggles between high/low input impedance (blue LED indicates high-impedance)
2. VOLUME knob sets overall volume of effect
3. SI/GE switch toggles between silicon (white LED)/germanium (blue LED) fuzz styles
4. FUZZ knob controls intensity of fuzz effect
5. FOOTSWITCH toggles effect on/bypass (blue LED indicates on)

Basic Operation

Power
The Authentic Hendrix ™ ’68 Shrine Series Fuzz Face® Distortion is powered by the Dunlop ECB003 9-volt adapter or an MXR® Brick™ Series power supply (each sold separately). This pedal cannot be powered by a battery.
Directions

1. Run a cable from your guitar to JHMS1’s INPUT jack and another cable from JHMS1’s OUTPUT jack to your amplifier.
2. Start with VOLUME and FUZZ controls at 12 o’clock.
3. For aggressive silicon-based crunch, set the SI/GE switch to its OUT position, indicated by the white LED. For smooth germanium-based saturation, set the SI/GE switch to its IN position, indicated by blue LED.
4. Turn effect on by depressing the footswitch.
5. Rotate VOLUME knob clockwise to increase overall volume or counterclockwise to decrease it.
6. Rotate FUZZ knob clockwise to increase the amount of fuzz or counterclockwise to decrease it.
7. To prevent oscillation when using a wah pedal and preserve high end tone, this pedal’s buffer is set to ON by default, indicated by the associated LED. To disable the buffer, set the BUFF switch to its IN position.

Specifications

SILICON / GERMANIUM FUZZ (BUFF ON)

Output Impedance
Max Volume| 16 kΩ
Mid Volume| 160 kΩ
Max Output Level| -4 dBV
Max Gain| 55 dB
Bypass| True Hardwire

POWER REQUIREMENTS
Current Draw| 6.8 mA
Power Requirements| 9 volts DC

jimdunlop.com/jhms1
JHMS1
AUTHENTIC HENDRIX
1968 SHRINE SERIES FUZZ FACE
DISTORTION

Documents / Resources

| Dunlop JHMS1 Authentic Hendrix Shrine Series Fuzz Face Distortion [pdf] User Manual
JHMS1 Authentic Hendrix Shrine Series Fuzz Face Distortion, JHMS1, Authentic Hendrix Shrine Series Fuzz Face Distortion, Hendrix Shrine Series Fuzz Face Distortion, Fuzz Face Distortion, Face Distortion, Distortion
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>