OUKANING HG-HCX366-765US Semi Flush Mount Modern Round Glass Shade Ceiling Light Instruction Manual

HG-HCX366-765US Semi Flush Mount Modern Round Glass Shade Ceiling Light
Installation Instruction

PART LIST AND ASSEMBLY ILLUSTRATION

Note: Some parts may be per-installed or per-assembled

1. Open the package and take out all the parts or accessories, then place them on a clean flat place:
2. Please turn off the power first:
3. Screw the rods(1) tightly onto the lamp body (2)
4. Fix (1) tightly onto the (3)
5. Fix (3) tightly onto the (4)
6. Fix (4) tightly onto the (5)
7. Close the ceiling base (5) onto the ceiling:
8. Connect (6): 9. Fix (5) and tighten with nuts
9. Install E26 light bulbs into the bulb base:

Accessories List

Item NO: HG—HCX366-765US
NOTE: Please read all instructions before assembly or install the product , if have any question, contact us in time.

TOOLS REQUIRED

WARNING: (To reduce the risk of fire, electric shock, or injury to persons):

1. We suggest installation by a licensed electrician.

2. Please read the instruction carefully and save it as you may need it at later time.

3. Before you start, NEVER attempt any work without shutting off the electricity until the work is done.
   A). Go to the main fuse, or circuit breaker, box in your hate. place the main power switch in the “OFF” position.
   B). Place the wall switch in the “OFF” position.

4. Mounting surface should be clean, dry, flat, strong enough and 1/4″ larger than the canopy on all side. Any gaps between the mounting surface and canopy exceeding 3/16″ should be corrected as rewired.

5. Make sure that the ceiling or wall can stand the weight of the lamp before fixture.

6. Make sure the voltage you are using is 120V . The maximum wattage is 40Vf per bulb.

7. Keep the lamp away from acidic and basic objects in case of damaging the surface of the leap.

8. then replacing bulb, you should turn off or imp lug the lamp and you must wait until it is cool as bulbs get hot quickly.

9. The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense, caution and care must be used with any electrical products.

10. Do not touch the bulb or lamp shade during the lighting fixture working.

11. An individual grounding conductor of a chain-and-canopy suspended. Lumina ire shall be interwoven through the chain from the lumina.re to the canopy.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>