JBC MN-A Nitrogen Regulator Module for DI Control Unit Instruction Manual
- June 10, 2024
- JBC
Table of Contents
JBC MN-A Nitrogen Regulator Module for DI Control Unit Instruction Manual
Packing List
Description
The MN is an electrovalve controlled by the soldering station that allows you
to solder with nitrogen with a minimum gas consumption.
Once the MN (Nitrogen Regulator Module) has been connected to the Control
Unit, enter into the Station Settings menu and switch on the Nitrogen Mode.
The module will let the gas flow when taking out the tool from the stand and
turning off when the
tool is again placed in its stand and reaches the sleep temperature.
Specifications
Nitren Regulator Module for DI Control Units Ref.: MN-A
- Weight: 1,142 kg (2.51 lb)
- Dimensions: 50 x 120 x 130 mm (1.97 x 4.72 x 5.12 in)
- Voltage (AC): 24V (from control unit)
- Power: 3W
- N2 flow regulation: 0,5 – 3,5 SLPM (5 Bar)
- Max. Pressure 6 bar
- Ambient operating temperature: 10 – 40 ºC (50 – 104 ºF)
Complies with CE standards. ESD Safe
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage
paid, to the dealer where it was purchased.
Register your warranty within 30 days of purchase in
www.jbctools.com/productregistration
This product
should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at
the end of their life
must be collected and returned to an authorized recycling facility
Read More About This Manual & Download PDF
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>