xtorm XW401 SOLO Wireless Charger Instruction Manual

: June 10, 2024
: Xtorm

Table of Contents

xtorm XW401 SOLO Wireless Charger
SPECIFICATIONS
PRODUCT OVERVIEW
CHARGING YOUR DEVICE
CHARGE SEPARATELY
LED LIGHT INDICATOR
IN THE BOX
XTORM SAFETY CHECK
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

xtorm XW401 SOLO Wireless Charger

xtorm XW401 SOLO Wireless Charger product

SPECIFICATIONS

XW401

USB-C™ PD 20W
Wireless 5W/7.5/10W/15W (max)
80x80x8.5 mm
50 grams
1x USB-C™ PD cable (1.5m)
1x Manual

XW402

USB-C™ PD 20W
Wireless 5W/7.5/10W/15W (max)
2x 80x80x8.5 mm
100 grams
2x USB-C™ PD cable (1.5m)
1x Manual

PRODUCT OVERVIEW

Input USB-C 20W
Wireless output 15W
LED light indicator
Official Xtorm Label
Connection 2nd charger

CHARGING YOUR DEVICE

A Connect the USB-C end of the charging cable to the input of the wireless charger and the other USB-C end to a wall charger.
B Place your device on top of the wireless charger, your device will charge automatically.

CHARGE SEPARATELY

For charging two devices at the same time

Create a dual charger by connecting 2 chargers together magnetically. The expansion port transfers power, you only need to use 1 cable.
When the two chargers are connected together, the 15W maximum power will be split between them in 10W/5W, or 7.5W/7.5W.

LED LIGHT INDICATOR

To indicate the power is on, the LED light ring will slowly flash 3x, and then turn off. Place your phone in the middle of the charger, and charging will start automatically.
To indicate charging has started, the LED light ring will slowly flash 3x, and then turn off.

IN THE BOX

XW401 solo
Wireless charger
USB-C™ PD cable (1.5m)
Manual
XW401 Duo
2x Wireless charger
2x USB-C™ PD cable (1.5m)
Manual

XTORM SAFETY CHECK

TEMPERATURE CONTROL
Provided with a temperature control chip that prevents overheating.
OVERLOAD PROTECTION
Protects both the internal battery as well as the battery of the attached device from overcharging.
SECURED POWER MANAGEMENT
Automatically picks the correct charging speed and efficiently divides power between attached devices.
SHORT CIRCUIT PROTECTION
Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm charger and your device from short circuit damage.
A-CLASS BATTERY CELLS
We only use the best battery cells that provide the fast charging you need and meet all safety requirements.
HIGH EFFICIENCY
Our power products are built to power your device as efficient as possible. This ensures the least possible loss of energy during the charging process.

WARNINGS
Don’t drop, dissemble or attempt to repair the charger by yourself. Avoid exposure to water or high humidity. Don’t expose to any heat source. Keep out of reach of children. Don’t use in the presence of flammable gas. The warranty will lapse in the event of improper use. Telco Accessories has tested the product in a test environment. All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.