BidetMate 2000 Series Electronic Smart Toilet Seat User Guide
- June 10, 2024
- BIDETMATE
Table of Contents
BidetMate 2000 Series Electronic Smart Toilet Seat User Guide
User setting with remote control.
Extra functions with side control panel
User Instructions
Instructions and caution statements for cleaning, user maintenance, operations recommended by the manufacturer, such as lubrication or non-lubrication, and a warning to the user that any other servicing should be performed by an authorized service representative or that the product has no user serviceable parts. The manual or other literature packaged with the product shall also indicate the product is for household use.
Specific instructions for the proper method of cord storage, total product storage, and the like when the product is not in use; and for cord care while in use, such as for hand supported products, untwisting, and the like.
Maintenance & Cleaning
Cleaning of Water Pipe Filter
- Close the water valve by turning it clockwise.
- Disconnect the water supply hose. Take the screen filter out and clean it with a soft brush. (e.g. toothbrush)
- After cleaning, place it back. Then connect the water supply hose.
- Open the water valve by turning it counter-clockwise.
Cleaning of Nozzle
- Press the Wash button on the side panel (not the remote) for 3 sec., and then the nozzle will move forward and stop (for 2 minutes)
- Clean the nozzle with an unused toothbrush, etc., and press the Stop button, then it will return to the original place for self cleaning.
Cleaning of Bidet Body
- Exterior surface of bidet is made of plastic material, which may be damaged by scrubber, chemicals, etc.
- Wipe the product surface with a soft cloth dampened with room temperature water and if needed a pea size amount of soap labeled, “for use on all surfaces.” Then remove all residue of soap with a clean sponge or soft cloth dampened with room temperature water. Do not spray water directly onto the surface
- Clean the body after removing the power plug from the outlet. Be sure no water splashes to the power plug or outlet. Don’t touch the power outlet with wet hands. Risk of electric shock.
- Risk of damage. Be careful to not drop any chemical detergents or toilet cleaner on the water supply hose or rest of the product. Do not to close the cover before the cleaning agent in the ceramic toilet bowel is completely washed away otherwise the surface of the product may be corroded by the evaporation of the cleaning agent.
- The deodorizer cartridge can be cleaned from time to time with a dry, soft brush to remove any dust build-up on the surface. It does not need to be replaced.
Draining of Hot Water Tank
- Remove the power plug from the outlet.
- Close the water feed valve by turning it clockwise.
- Press the release button on the side of main body.
Maintenance During Winter Season
When bidet seat is not used for an extended period of time, either; Leave unit plugged in and turned on OR unplugged and drain the unit.
Do Not Throw Away
We are committed to protect the environment. Please help us by disposing of
this product in a responsible way when it reaches the end of its service life,
to prevent certain substances contained in electric and electronic products
from harming public health or the environment. The symbol means that the
products may not be thrown away with other household waste: at the end of its
service life, it may be taken at no charge to you to the waste collection
centres provided for the purpose by the authorities in your country. It may be
taken to the distributor from whom you purchase a new product that is
equivalent to or that performs the same functions as this product. This later
option may not be available in some countries.
Repair & Specifications
BeFore Requesting Repair
Please refer to the following table for the exact status when requesting repair service.
Self- Diagnosis Tobie
Please refer to the following table for the exact status when requesting repair service.
Specifications
