Lumenier QAV-PRO Nano Whoop 5 Inch Cinequads User Manual
- June 10, 2024
- Lumenier
Table of Contents
QAV – P RO OO NA NO WHP
PROFESSIONAL EQUIPMENT FOR CINEMATIC FPV
PRODUCT Manual
PARTS NEEDED FOR THE ASSEMBLY
BOTTOM PLATE ASSEMBLY
-
START THE ASSEMBLY BY USING THE M2X4MM SCREWS TO MOUNT THE STANDOFFS AND THE ALUMINUM CAMERA MOUNT TO THE BOTTOM PLATE. INSTALL THE ADDITIONAL 4x M2 RUBBER LANDING FEET TOP PLATE ASSEMBLY
-
RFOR A CLEANER POWER SOLUTION USE THE TPU POWER MOUNT TO SECURE THE XT-30 CONNECTOR TO THE TOP PLATE
MOUNTING THE DJI 03 UNIT -
DISASSEMBLE THE DJI 03 AIR UNIT BY REMOVING THE STOCK SCREWS. USE M1.6x8mm SCREWS TO MOUNT THE UNIT TO THE TOP PLATE AND M1.6X1OMM SCREWS TO MOUNT IT TO THE SPACERS ON THE BOTTOM PLATE. COMPLETE THE ASSEMBLY BY SECURING TOP AND BOTTOM PLATES WITH M2X4MM SCREWS
MOUNTING THE DJI 03 CAMERA -
IN ORDER TO MOUNT THE DJI 03 CAMERA TO THE SIDE PLATES INSTALL THE M2 RUBBER GROMMETS INSIDE OF THE PLATES. USE M2XSMM SCREWS TO MOUNT THE CAMERA TO THE SIDE PLATES AND USE M2x4mm TO MOUNT THE CAMERA ASSEMBLY TO THE ALUMINUM MOUNTS MOUNTING THE DJI 03 ANTENNA
-
RUN THE ANTENNA WIRES INSIDE OF THE ALUMINUM MOUNT AND SECURE IT TO THE FRAME BY USING M2X4MM SCREWS
MOUNTING PATTERN MISCELANEOUS PARTS ASSEMBLY
-
STICK THE BATTERY PAD TO THE TOP PLATE AND INSTALL THE STRAP INTO THE TOP PLATE SLOTS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>