Keurig B155 Office Pro Commercial Coffee Maker Owner’s Manual

: June 10, 2024
: Keurig

Keurig B155 Office Pro Commercial Coffee Maker

Keurig-K155-Office-Pro-Commercial-Coffee-Maker-fig

Specifications

Brand Keurig
Capacity 9 Quarts
Color Silver
Product Dimensions 38″D x 14″W x 13.8″H
Special Feature Timer, Removable Tank, Programmable
Coffee Maker Type Pour Over
Material Plastic
Filter Type Reusable
Specific Uses For Product Coffee maker
Item Weight 6 Pounds
Wattage 4 watts
Voltage 120

Description

At the touch of a button, the Keurig K155 Office PRO Commercial Coffee Maker creates a perfect cup of coffee, tea, hot cocoa, or chilled beverage in less than one minute. Now everyone with whom you work can brew their favorite K-Cup pods. With this completely programmable brewer’s interactive touchscreen, you can program the brew temperature, Auto On/Off, and choose between English, Spanish, or French as your preferred language. The K155 Commercial Coffee Maker features 4 cup sizes, a removable drip tray to fit travel mugs, and an inbuilt hot water tank that can be drained for storage or transportation. This Keurig coffee machine boasts features that everyone will value and is designed to impress.

IMPORTANT SAFEGUARDS

Safe Operation & Use

When using electrical appliances, basic safety precautions should be followed, including the following:

Read all instructions before using.
Do not touch hot surfaces. Use handles and knobs when available.
This appliance must be properly installed and located in accordance with these instructions before it is used.
The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electrical shock or injury to persons.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Do not use outdoors.
To protect against fire, electric shock and injury do not immerse cords, plugs, or the appliance in water or any other liquid.
Do not overfill the Water Reservoir.
Use only water in this appliance! Do not put any other liquids or foods in the Water Reservoir except as directed in the Cleaning Instructions.
Turn off and unplug the Brewer before cleaning or maintenance. Allow to cool before putting on or taking off parts and before cleaning the appliance.
For best operation, plug the appliance into its own electrical outlet on a dedicated circuit to prevent flickering of lights, blowing of fuses or tripping a circuit breaker.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is damaged in any manner. Contact Keurig Customer Service to report any malfunction of or damage to the Brewer.
Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
To disconnect, turn the Power Button to ‘OFF’ status and then remove the plug from the wall outlet.
Close supervision is necessary when any appliance is used by or near children. Do not lift the Handle to open the Lid of the Brewer while brewing is in progress.
Always keep the Water Reservoir Lid on unless you are refilling it.
This appliance is equipped with a power cord having a grounding wire with a grounding plug.
The appliance must be grounded using a 3-hole properly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock.
If the outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord or use an adapter.
Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
Do not use the appliance for other purposes than its intended use.

SAVE THESE INSTRUCTIONS
Warning To Users And Parents

DO NOT permit children to use brewer unless there is adult supervision. Brewer dispenses very hot water.
SPECIAL NOTICE FOR HOT COCOA USERS: IMMEDIATELY AFTER USING A HOT COCOA K-CUP® PACK, RUN a Hot Water Brew Cycle without a K-Cup® pack to avoid the possibility of clogging the exit needle. DO NOT assume the next user will do this.
CAUTION: There are two sharp needles that puncture the K-Cup® pack, one above the K-Cup® Pack Holder and the other in the bottom of the K-Cup® Pack Holder. To avoid the risk of injury, do not put your fingers in the K-Cup® Pack Assembly Housing.
CAUTION: There is extremely hot water in the K-Cup® Pack Holder during the brewing process. To avoid risk of injury, do not lift the Handle or open the K-Cup® Pack Assembly Housing during the brewing process.

If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance; (2) the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally; and (3) the extension cord must include a 3-prong grounding plug.

This Product Is For Household Use & Commercial Use

Warning this product contains chemicals, including lead, which is known to the state of California to cause cancer, birth defects or other reproductive harm.

Set-up

Helpful Hints

Keep your Brewer turned “ON” at all times.
To brew a fresh cup of coffee, tea, or hot cocoa anytime you want, we suggest you keep your Brewer turned “ON” all the time. However, the Brewer is fully programmable so you can set it to turn on and off automatically to match your schedule. Or, if you prefer, set the Brewer to automatically turn off after a period of time. Follow the simple instructions on pages 13–14 to make using the Brewer convenient for you.
For the best-tasting gourmet coffee, tea, or hot cocoa, Keurig recommends using bottled water or the Keurig™ Water Filter Starter Kit (available atwww.keurig.com).
Water quality varies from place to place. If you notice an undesirable taste in your cup of coffee, such as chlorine or other mineral tastes, we recommend you consider using bottled water or water from a filtration system.
Customize the Size, Flavor & Brew That’s Perfect for You.™
With the choice of over 200 varieties of K-Cup® packs and 4 brew sizes (Small Cup-4 oz., Small Mug-6 oz., Medium Mug-8 oz., and Large Mug-10 oz.) your Keurig® Brewer gives you endless options to customize the size, flavor and brew that’s perfect for you. For a strong, intense cup, select an Extra Bold K-Cup® pack (with up to 30% more ground coffee than regular varieties) and brew the size that’s right for you. The smaller the brew size, the more intense flavor in your cup. The larger the brew size, the less intense flavor in your cup.
Plug Brewer into its own grounded outlet.
If the electric circuit is overloaded with other appliances, your Brewer may not function properly. The Brewer should be operated on its own circuit, separate from other appliances.
Brewing into a travel mug.
To brew into a travel mug, simply remove the Drip Tray Assembly and place the travel mug on the Drip Tray Base.
De-scale Brewer regularly.

Unpacking Instructions

Place the Brewer box on a large steady surface (such as a table or countertop) or on the floor. Open the box.

Remove the enclosed literature and K-Cup® variety pack.
Turn the box on its side with the front of the box face down.
Reach into the box and grasp the foam insert that contains the Brewer.
Carefully pull the foam insert toward you and out of the box. The Brewer will still be encased in the polyfoam and be on its side.
Remove the top polyfoam packaging material.
Carefully lift Brewer off of the bottom polyfoam and place it upright on a flat, steady surface.
Lift the plastic bag off of Brewer.
Record the serial number for this Brewer on page 3 of this guide. The serial number can be found on the side of the Brewer box or on the bottom of the Brewer.
Place the Brewer upright on a flat, steady surface. Remove the tape holding Water Reservoir in place.
We recommend you save all packing materials in case future shipping of the product is necessary.
WARNING: Keep all plastic bags away from children.

Features

Keurig-K155-Office-Pro-Commercial-Coffee-Maker-fig-1

OfficePRO® Premier B155 Brewer

Water Reservoir Lid
Water Reservoir
Water Reservoir Lock Tab Slots
Handle
K-Cup® Pack Holder Funnel
K-Cup® Pack Holder (E and F are the K-Cup® Pack Holder Assembly)
K-Cup® Pack Assembly Housing
Lid
Drip Tray Base
Drip Tray
Drip Tray Plate
LCD Screen
BREW Button
Housing
Power Switch
Power Cord

Set-Up & First Brew

IMPORTANT: You cannot use your Keurig® Brewer until it has been set up for its ﬁrst use.
NOTE: If Brewer has been exposed to temperatures below freezing, allow Brewer at least two hours to reach room temperature before brewing. A frozen or extremely cold Brewer will not operate.

Setting Up Your Brewer

Remove all pieces of packing tape from the Brewer and Drip Tray. Remove the clear plastic film from the LCD Display. Unwrap cord and plug the Brewer into a grounded outlet.
Turn the Brewer on, the Power Switch is located at the top left-hand side of the Brewer on the back. The Brewer’s LCD Display will display the power up welcome screen (fig. 1).
Remove the Water Reservoir from Brewer by first removing Lid from the Water Reservoir then lifting the Water Reservoir straight up and toward the right of the Brewer (may be tight). Rinse the Water Reservoir thoroughly with fresh, clean water.
Fill the Water Reservoir up to the fill mark with fresh, clean water. Replace the Water Reservoir on the Brewer making sure that the locking tabs engage with the Brewer (fig. 2). Replace Lid on Water Reservoir.
The Brewer will automatically fill the Internal Hot Water Tank with water and then the water will be heated. This will take about 3 minutes. During the heating period, “HEATING PLEASE WAIT” will be displayed on the LCD Screen (fig. 3).
Place a 10 oz. mug on the Drip Tray Plate, then fully raise and lower the Brewer Handle. The Brew Button will now be illuminated. Press the Brew Button to start a cleansing brew.
NOTE: A K-Cup® pack should not be used for this sequence.
When the cleansing brew is complete, the Brewer will go into its idle state and will be ready to brew your first K-Cup® pack.

Ready To Brew Your First Cup

The LCD Display will be in its idle state (fig. 4).
Lift the Handle. The K-Cup® Pack Holder will open toward you (fig. 5).
Select a K-Cup® pack.
NOTE: Do not remove the foil lid or puncture the K-Cup® pack.
Place a K-Cup® pack in the K-Cup® Pack holder (fig. 6).
CAUTION: There are two sharp needles that puncture the K-Cup®pack, one above the K-Cup® Pack Holder and the other in the bottom of the K-Cup® Pack Holder. To avoid risk of injury, do not put your fingers in the K-Cup® Pack Assembly Housing.
Lower the Handle to close the Lid over the K-Cup® Pack Holder. (When it is closed completely, the BREW Button will flash up to 60 seconds.)
Place a mug on the drip tray and select your brew size (fig. 7), then press BREW (fig. 8).

Keurig-K155-Office-Pro-Commercial-Coffee-Maker-fig-7

NOTE: If you do not press BREW within 60 seconds the Brewer will return to its idle state and the Brew Button will cease to flash to prevent accidental activation. Re-activate by raising the handle fully and then closing it.

There may be a short pause prior to coffee being dispensed. The entire brew process lasts for approximately 1 minute and ends with a burst of air to remove all liquid from the K-Cup® pack.
CAUTION: There is extremely hot water in the K-Cup® Pack Holder during the brew process. To avoid risk of injury, do not lift the Handle or open the K-Cup® Pack Assembly Housing during the brew process.
The end of brew is indicated by “KEURIG BREWED ENJOY”.
Lift the Handle, remove and dispose of the used K-Cup® pack.
CAUTION: K-Cup® pack will be hot.
Enjoy your first cup of Keurig Brewed® gourmet coffee, tea or hot cocoa!
Your Brewer may display “HEATING PLEASE WAIT” as it heats water for the next brew cycle.

Stopping The Brew Process

If you need to stop the brewing after the process has started, press and release the Power Switch to turn the Brewer ‘OFF’. The flow of coffee, tea or hot cocoa will stop and the heating element and the LCD Screen will shut off. NOTE: You may get more coffee, tea or hot cocoa in your cup during your next brew. We recommend that you perform a cleansing brew with water only after a terminated brew. Then your next brew will be the volume you have selected.

Adding Water

The LCD Display of your Brewer will indicate when the water level in the Reservoir is low or if the Water Reservoir has been removed by displaying the words “FILL WATER RESERVOIR” (fig. 9). The Brewer will not allow you to brew when “FILL WATER RESERVOIR” is displayed (fig. 9).

The Water Reservoir can be filled in two ways.

Remove the Water Reservoir from Brewer by first removing Lid from the Water Reservoir, then lifting the Water Reservoir straight up and toward the right of the Brewer. Fill with water. Place the Water Reservoir back on the Brewer and replace the Lid.
IMPORTANT: Do not remove the Water Reservoir during the brewing process.
Lift off the Water Reservoir Lid and pour water directly into the Water Reservoir while it is still attached to the Brewer, then replace the Lid.

Brewing Hot Water

Your Brewer is able to produce hot water for making hot cocoa from a packet, or for use in cooking, etc. Simply follow the instructions on page 7, “Ready To Brew Your First Cup” without adding a K-Cup® pack.
NOTE: After brewing a hot cocoa K-Cup® pack, we recommend running a hot water brew cycle without a K-Cup® pack.

Purging The Brewer

If your Brewer has not been used for more than one week, you should purge the water from the internal water tank.

If there is water in the Water Reservoir, remove the Lid, then lift the Water Reservoir straight up and away from Brewer. Discard water, rinse and refill with water. Place the Water Reservoir back on the Brewer and replace the Lid. (If there is no water in the Water Reservoir, simply refill.)
Be sure the Brewer is turned ‘ON’. Raise and lower the Handle on the Brewer without inserting a K-Cup® pack.
The LCD Display will be in its idle state (fig. 4).
Place a large mug on the drip tray and select Large Mug (10 oz. serving) brew size from the Select Brew Size Menu (fig. 10).
Discard water.
Repeat steps 2 – 5 two more times to completely purge water from the Internal Hot Water Tank.

Menu Mode

To enter the MENU MODE the Brewer’s power must be off.
Press and hold your finger on the display while pressing and releasing the power switch. Continue pressure on the display for 5 seconds (fig. 11).
The MENU screen will appear. (fig. 12).
Press any line item to enter the setup for that particular feature.
Please reference the Menu navigation on page 11.
If you are experiencing any problems with your Brewer, please contact Customer Service at 1.866.901.BREW (2739).

Home
Press HOME at any time to return your Brewer to an idle state.
Clock
Setting the clock is optional. To program the clock, follow the instructions on page 12.
Brew Temp
The brew temperature is pre-set at 193˚F. You do not have to set the brew temperature but you can adjust it up or down by 5˚. Simply follow the instructions on page 12.
Brew Size(s)
Four brew sizes are available: 4 oz., 6 oz., 8 oz., and 10 oz. To program the brew sizes, see page 13.
Auto OFF
Auto Off allows you to program your Brewer to automatically turn off two hours after the last brew. See page 14 for programming instructions.
ON/OFF Time
You can leave your Brewer on all the time and use the Power button to turn it off. Or you can program the Brewer to brew at a specific time as shown on page 13.
Language
This Brewer is shipped with English as the default language. To change the language, follow the instructions on page 14.
Contact
The contact setting features allow you to program the contact information you need for Brewer support and help. To program, follow the instructions on page 14.

Setting the Clock

Setting the clock is optional. When the clock is set, the time will appear in the LCD Control Center.
NOTE: You must set the clock if you will be programming the Auto On/Off Time feature.

From the Menu Mode, press “CLOCK”.
The set clock screen will display “DISABLED” if the Brewer is new or if electrical power has been interrupted. Press “DISABLED” to set a time. Press H repeatedly to advance the hour in steps or hold it down to scroll through the hours quickly. When you have set the hour then press the M to set the minutes, press repeatedly to advance by a minute each time or keep it pressed to scroll quickly (fig. 13).
Press “OK” when you are finished. The Clock is now set.
The correct time should now be displayed in the LCD Home Screen.
NOTE: If power is interrupted to the Brewer, follow the procedure above to reset the time as the clock will not be visible. Brew size and brew temperature menu settings will be restored automatically. All other settings will be restored automatically after the clock is set.
NOTE: To disable the clock, press the time. However, the ‘On/Off’ time setting will also be disabled.

Programming Brew Temperature (188° – 198º F)

The Brewer brews at a preset temperature of 193°F. You can adjust this temperature up or down by 5°. Simply follow the instructions below.

From the Menu Mode, press “BREW TEMP”.
The LCD Display will now display the Brew Temperature programming options (fig. 14). The temperature 193°F (initial setting) will be displayed at the top of the LCD Display to indicate the current temperature setting.
Press the + symbol to increase the temperature and the – symbol to lower the temperature one degree at a time.
Once you have reached your desired brew temperature, press “OK”. The Brew Temperature is now set.
To change the brew temperature, repeat steps 1 through 4.

NOTE: At high altitudes (over 5,000 feet) if boiling occurs, use the temperature adjustment (-5°) to lower the temperature.

Programming Your Brew Size

All brew sizes are enabled in the default setting. If you want to disable any brew size, just press on the appropriate icon(s). Please follow instructions outlined below.

From the Menu Mode, press “SET BREW SIZE(S)”.
The LCD will display all enabled brew sizes. To disable a brew size, press the icon. The check mark will change to an “X” indicating that the brew size is disabled (fig. 15).
Once you have selected your desired brew size(s), press “OK”. The brew size(s) are now set.
NOTE: You cannot delete all brew sizes. To enable a brew size you have already disabled, just press its icon and then press “OK”. The default brew size is always 8 oz. This brew size cannot be changed or disabled.

Programming On/Off Features

The Brewer provides three modes so that you can enjoy gourmet coffee, tea or hot cocoa on your own schedule.

Leave it ON all the time. The Brewer can be left on all the time so that it is always ready to brew a fresh cup of gourmet coffee, tea or hot cocoa. To turn the Brewer off at any time, simply press and release the Power Switch. Press and release the Power Switch again to restore power to the Brewer. You will have to wait for the water to heat up before the Brewer is ready to brew.
Program the Brewer for a specific On/Off Time. NOTE: To use this programming feature, the clock must be set to the correct time.
- After setting the correct time (see “Setting The Clock” page 12), return to the Menu Mode and press “ON/OFF TIME”.
- To set the ON time, press “DISABLED”. The display will change to a time of day. Press “H” to set the hours and “M” to set the minutes. Once the desired time is set, press “OK” to accept this time.
- To set the OFF time, press “DISABLED”. The display will change to a time of day. Press “H” to set the hours and “M” to set the minutes. Once the desired time is set, press “OK” to accept this time (fig. 16).
Set the Brewer to “AUTO OFF” to automatically turn off 2 hours after the last brew.
- From the Menu Mode, press “AUTO OFF”. The LCD Display will now display the “AUTO OFF” programming option (fig. 17).
- To enable the “AUTO OFF” feature, press “ON”. “ENABLED” will appear on the screen and press “OK”. To disable the “AUTO OFF” feature, press “OFF”. “DISABLED” will appear on the screen and press “OK”.

Language Settings

The Brewer is shipped with English as the default language. To change the default to Francis or Espanola, follow the instructions outlined below.

Set Language

From the Menu Mode, press “LANGUAGE”.
The LCD Display will now display the Language programming options (fig. 18).
Press the desired Language button, then press OK to confirm your selection.

Setting Contact Screen

The contact screen is pre-programmed with the following information: Keurig, Incorporated. and www.keurig.com.

You can reprogram the brewer with your contact information. The contact screen will appear in the screen saver.

From the Menu Mode, press “CONTACT”. The LCD screen will display the Keurig default contact information (fig. 19).
Press the Upper (Company Name) Box. The Keypad will appear along with the current information (fig. 20). NOTE: Unless changed by the user, Keurig contact information will be present on the display.
- Press Delete Key repeatedly to remove current information. Enter new information using the Keypad.
  NOTE: To select Upper Case, Lower Case, Numerals, Upper Case Accents, Lower Case Accents, press the Keypad Change Key located at the bottom center of the screen.
- Press “OK” to save your changes and return to the Main Contact Screen. NOTE: Pressing the Back-Arrow Key will return to the Main Contact Screen without saving changes.
Press the Middle (Phone Number) Box. The Numeral Keypad Mode will appear along with the current information (fig. 21).
- Delete current phone number and enter new information using the Keypad.
- Press “OK” to save your changes and return to the Main Contact Screen.
Press the Lower Box. This box can be customized to contain any information such as web/email address, contact name, etc. (fig. 22).

Keurig-K155-Office-Pro-Commercial-Coffee-Maker-fig-24

  * Enter new information using the Keypad.
  * Press “OK” to save your changes and return to the Main Contact Screen.
  * In Main Contact Screen (fig. 19), press “OK” to save the updated screen as the default and return to the Menu Screen.

Cleaning & Maintenance

Cleaning External Parts

Regular cleaning of Brewer’s external components is recommended.

Never immerse the Brewer in water or other liquids. The Housing and other external components may be cleaned with a soapy, damp, non-abrasive cloth.
The Drip Tray can accumulate up to 12 ounces of overflow. The Drip Tray and Drip Tray Plate should be periodically inspected and rinsed clean. To remove the Drip Tray Assembly, simply slide it toward you, keeping it level at all times to avoid spilling. The Drip Tray and Drip Tray Plate should not be placed in the dishwasher. They should be cleaned with a damp, soapy, non-abrasive cloth and rinsed thoroughly.

Cleaning The K-Cup® Pack Holder Assembly

Cleaning the Parts —The K-Cup® Pack Holder Assembly can be placed onto the top shelf of a dishwasher.
NOTE: Use low-temperature cycles in the dishwasher. To remove the K-Cup® Pack Holder Assembly from the Brewer, open the cover by lifting the Handle. Grasp the top of the K-Cup® Pack Holder with one hand while pushing up on the bottom of the K-Cup® Pack Holder from underneath with the other until it releases (fig. 23). After cleaning, align the K-Cup® Pack Holder with the opening using the two front ribs as a guide, and snap them into place from the top.
Cleaning the Funnel —The Funnel can be removed from the K-Cup® Pack Holder by pulling on it until it pops off (fig. 24). The Funnel is dishwasher safe. To replace it, just snap it back onto the K-Cup® Pack Holder.
Cleaning the Exit Needle —The Exit Needle is located on the inside bottom of the K-Cup® Pack Holder. Should a clog arise due to coffee grinds, it can be cleaned using a paper clip or similar tool. Remove the K-Cup® Pack Holder Assembly and detach Funnel. Insert the paper clip (as shown in fig. 24) into the Needle to loosen the clog, then flush with water. The K-Cup® Pack Holder Assembly can be placed onto the top shelf of a dishwasher.
NOTE: Use low-temperature cycles in the dishwasher.

CAUTION: There are sharp needles that puncture the K-Cup® pack above the K-Cup® Pack Holder and in the bottom of the K-Cup® Pack Holder. To avoid risk of injury, do not put your fingers in the K-Cup® Pack Assembly Housing.

Cleaning The Water Reservoir & Water Reservoir Lid

The Water Reservoir Lid or Water Reservoir should not be put into the dishwasher. They should be cleaned with a damp, soapy, non-abrasive cloth and rinsed thoroughly. Do not dry the inside of the Water Reservoir with a cloth as lint may remain.
CAUTION: Please rinse the Water Reservoir thoroughly after cleaning to ensure that no cleaners or cleaning solutions remain in this area as they may contaminate the water supply in the Brewer.

De-Scaling Your Brewer

Mineral content in water varies from place to place. Depending on the mineral content of the water in your area, calcium deposits or scale may build up in your Brewer. Scale is non-toxic, but left unattended, it can hinder Brewer’s performance. De-scaling your Brewer helps maintain the heating element and other internal parts of the Brewer that come in contact with water.

The Brewer should be de-scaled every 3-6 months to ensure optimal performance. It is possible for calcium deposits to build up faster, making it necessary to de-scale more often.

De-Scaling Instructions

Prepare

Step 1: Make sure you have at least 90 oz. of undiluted white vinegar on hand. You will also need an empty sink and a large ceramic mug (do not use a paper cup).
Step 2: Empty the water in the Water Reservoir.
Step 3: Disable “Auto Off” and program “On-Off” time.

Fill And Clean

Step 1: Pour the vinegar into the Water Reservoir to fill it.
Step 2: Place a large mug on the Drip Tray Plate and run a water brew cycle. DO NOT USE A K-CUP® PACK, just select the Large Mug brew size. Pour the contents of the large mug into the sink.
Step 3: Repeat the brew process 3 times.
Step 4: Let the Brewer stand for at least 4 hours while still on.

Rinse

Step 1: Ensure the Water Reservoir is filled with fresh water.
Step 2: Place a large mug on the Drip Tray Plate and run a water brew cycle. Pour the contents of the large mug into the sink.
Step 3: Repeat brew process until the Water Reservoir is empty.
Step 4: You may need to perform additional water brew cycles if you notice any residual taste or odor.

Service

Beyond these recommended cleaning and maintenance procedures this Brewer is not user serviceable. For service, please refer to the Warranty section of this guide.

Storage

Draining The Brewer

Turn off the Brewer, unplug it, and allow the Brewer to cool for approximately 30 minutes.
Empty the Water Reservoir by first removing the Lid from the Water Reservoir and then lifting the Water Reservoir straight up and toward the right of the Brewer (may be tight). Rinse and Empty the Water Reservoir.
Turn the Brewer around so the back is facing out. Unscrew the small knob to release the back panel, remove the panel from the Brewer, and set it aside. If the screw is tight, you may need to use a flathead screwdriver. Pull the tube down until the end is free (fig25). Over a large pitcher, remove the plug and drain the water from the Internal Hot Water Tank into the pitcher.

CAUTION: If the Brewer was not allowed to cool sufficiently, the water draining from the tube may be very hot. Re-cap the tube.
NOTE: To avoid losing parts, when finished, re-insert the tube and screw the panel back onto the Brewer.

Troubleshooting

Brewer Does Not Have Power

Plug Brewer into an independent outlet.
Check to be sure that it is plugged in securely.
Plug into a different outlet.
Reset your home’s circuit breaker if necessary.
Make sure that the Power Switch has been turned on and LCD Display is illuminated.

Brewer Will Not Brew

After placing the K-Cup® pack in the K-Cup® Pack Holder, make sure the Handle is pushed down securely and the LCD Control Center reads “READY TO BREW” with the BREW Button flashing, then press the BREW Button.
The Exit Needle may be clogged (refer to page 16).

LCD Messages

If the water reservoir is empty and needs to be refilled, the LCD Screen will direct you to “Lift Water Reservoir, Fill Water Reservoir, Replace Water Reservoir” with a slideshow of images. Follow these instructions.
In pour-over mode, if the water flow has been interrupted, the LCD screen will state “Water Flow Interrupted. To Reset, Please Lift and Remove Water Reservoir”. When the reservoir has been removed screen states “If necessary, please fill the water reservoir to the Max Fill line. Then replace”. Follow these instructions.
If the messages persist after following these instructions, contact Customer Service at 1.866.901.BREW (2739).

Chlorine Or Mineral Taste In Coffee

Consider using bottled water, filtered water, or the Keurig™ Water Filter Starter Kit (available at keurig.com).

Brewing A Partial Cup

The Exit Needle may be clogged.
Clean the K-Cup® Pack Holder assembly if necessary and rinse under the faucet.
The Water Reservoir may have been removed during brewing. Replace the Water Reservoir and perform a water brew without a K-Cup® pack.
“De-Scale” the Brewer.
If you have repeated the de-scale procedure on your Brewer two times and it is still only brewing a partial cup, contact Customer Service at 1.866.901.BREW (2739).

The Time Is Not Displayed On The LCD Message Center

The time will not be displayed on the LCD unless you have set it. To set the clock, follow the procedure on page 12.
If power is interrupted to the Brewer, you will need to set the clock again using the procedure on page 12.

Brewer Shuts Off Or Turns On Automatically

Check to make sure that the Auto Off timer and/or On/Off time features have not been set. To do this, press the MENU Button below “MENU” and scroll through the programming options. “OFF” should be displayed for Auto Off timer and On/Off. If “OFF” is not displayed, follow the directions to reset. If any problems persist, contact Customer Service at 1.866.901.BREW (2739)

Warranty

Limited Year Warranty

Keurig warrants that your Brewer will be free of defects in materials or workmanship under normal use for one year from the date of purchase. It is recommended that you fill out and return the warranty card enclosed with your Brewer so that your purchase information will be stored in our system. Keurig will, at its option, repair or replace the Brewer without charge upon its receipt of proof of the date of purchase. If a replacement Brewer is necessary to service this warranty, the replacement Brewer may be new or reconditioned. If a replacement Brewer is sent, a new limited one-year warranty will be applied to the replacement Brewer.

This warranty only applies to Brewers operated in the United States and Canada. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state and, in the case of Canada, from province to province.

What is not covered by the Limited Warranty?

This warranty does not cover consequential or incidental damages such as property damage and does not cover incidental costs and expenses resulting from any breach of this warranty, even if foreseeable. Some states or provinces do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you depending on the state or province of purchase.

Nor does this warranty cover damages caused by services performed by anyone other than Keurig or its authorized service providers, use of parts other than genuine Keurig parts, or external causes such as abuse, misuse, inappropriate power supply, or acts of God.

Other Limitations

This warranty is exclusive and is in lieu of any other express warranty, whether written or oral. In addition, Keurig hereby specifically disclaims all other warranties with respect to your professional series b155 brewer, including any implied warranty of merchantability or fitness for any particular purpose. Some states or provinces do not allow disclaimers of such implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you depending on the state or the province of purchase.

How do you obtain warranty service?

Keurig® Brewers are high-quality appliances and, with proper care, are intended to provide years of satisfying performance. However, should the need arise for warranty servicing, simply call Keurig Customer Service at our toll- free phone number 1.866.901.BREW (2739). Please do not return your Brewer for servicing without first speaking to Keurig Customer Service to obtain an Authorization to Return number (ATR). Keurig® Brewers returned without an ATR number will be returned to the sender without servicing.
Keurig, Incorporated 55 Walkers Brook Drive Reading, MA 01867 1.866.901.BREW (2739)

Frequently Asked Questions

What is the Keurig B155 Office Pro Commercial Coffee Maker?****

The Keurig B155 Office Pro Commercial Coffee Maker is a high-quality coffee machine designed specifically for use in office and commercial settings. It is built to handle high volumes of coffee brewing and offers a range of features to provide convenience and efficiency.

What are the main features of the Keurig B155** Office Pro?**

The Keurig B155 Office Pro Commercial Coffee Maker boasts several key features, including a large water reservoir (90 ounces), multiple brewing size options (4, 6, 8, and 10 ounces), a customizable user interface, programmable settings, an automatic on/off feature, and compatibility with a wide selection of K-Cup pods.

How does the Keurig B155 Office Pro work?****

The Keurig B155 operates on the same principle as other Keurig coffee makers. It uses pre-packaged K-Cup pods filled with coffee, tea, or other beverages. Users simply insert a K-Cup pod into the machine, select their desired brew size and other preferences, and the machine brews a single cup of hot beverage in under a minute.

Is the Keurig B155 Office Pro easy to clean?****

Yes, the Keurig B155 Office Pro is designed with ease of cleaning in mind. The machine features removable drip trays and a drip tray plate that can be washed separately. Additionally, the internal components can be descaled regularly to maintain optimal performance.

Can the Keurig B155 Office Pro brew tea and other hot beverages?****

Yes, the Keurig B155 Office Pro is not limited to brewing coffee. It can also brew a variety of other hot beverages, including tea, hot cocoa, and specialty drinks.

Can I adjust the strength of the coffee brewed by the Keurig B155 Office Pro?****

The Keurig B155 does not have a specific strength adjustment feature. However, you can control the strength of your coffee to some extent by choosing the appropriate brew size. Smaller brew sizes tend to result in stronger coffee, while larger brew sizes produce milder coffee.

Does the Keurig B155 Office Pro have a warranty?****

Yes, the Keurig B155 Office Pro comes with a warranty. The duration and terms of the warranty may vary, so it is recommended to check with the manufacturer or retailer for specific details.

Can I use my own coffee grounds with the Keurig B155 Office Pro?****

The Keurig B155 Office Pro is designed to work with K-Cup pods, which are pre- packaged with coffee or other beverages. However, there are reusable K-Cup pods available that allow you to use your own coffee grounds if desired.

How long does it take for the Keurig B155 Office Pro to brew a cup of coffee?****

The Keurig B155 is known for its quick brewing time. It typically takes less than a minute to brew a cup of coffee, depending on the selected brew size.

Is the Keurig B155 Office Pro energy-efficient?****

Yes, the Keurig B155 Office Pro is designed to be energy-efficient. It has an automatic on/off feature that helps conserve energy by turning off the machine when it’s not in use. Additionally, the machine meets several energy efficiency standards and regulations.

Download The PDF Link:Keurig B155 Office Pro Commercial Coffee Maker Owner’s Manual