UltraBrite 1656127 Modern Style LED Desk Lamp with Wireless Charging and Mood Light User Manual
- June 4, 2024
- UltraBrite
Table of Contents
UltraBrite 1656127 Modern Style LED Desk Lamp with Wireless Charging and
Mood Light
Thank You
Dear Valued Customer:
At UltraBrite, our mission is to “Elevate Your Lifestyle” through design,
functionality, and efficiency. We understand the value of aesthetics as much
as performance. That’s why we are committed to integrating the latest
technology, design sense, and practical solutions for today’s diverse and
multitasking needs. We are proud to share with you the UltraBrite® experience.
Your customer experience is extremely important to us. This applies not on to
the quality of our product and your personal satisfaction with it, but also
with how you will be treated as one of our customers. Should you have any
problem with your UltraBrite° product, please contac us at
877-654-1991 immediately and allow us
to take care of you and earn your loyalty.
Sincerely,
UltraBrite® Team
INSTRUCTION
SAVE THESE INSTRUCTIONS
For Customer Care, production operation information or problem resolution,
call toll-free at 1-877-654-1991.
IMPORTANT SAFETY INSTRUCTION
WARNING – DO NOT EXPOSE THE ADAPTOR TO RAIN OR MoISTURE TO REDUCE THE
RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
WARNING!: USE THIS PRODUCT ONLY ON A FIRM, LEVEL sURFACE AND PREVENT ANY
OBJECTS OR MATERIALS FROM COVERING THE LIGHT SOURCE AND/OR VENTILATION HOLES
OF THE PRODUCT. PLEASE READ THE INSTRUCTIONS BEFORE OPERATING THIS PRODUCT.
- LED module is not replaceable.
- Do not break or pull out LED bulbs.
- Indoor use only.
- Do not look directly at the light.
- LED module lamp head may get hot after several hours of continuous use, AVOID placing your hands directly on LED light panel.
- Keep lamp away from materials that may burn.
- If the power cord or adaptor is damaged, replace the power supply cord and adapter. Call Customer Care for assistance.
Operation Instructions
- Use this product only on a firm, level surface and prevent any objects or materials from covering the light source and/or ventilation holes of the product.
- Connect the AC adapter input into the connector in the rear of the lamp. Plug the AC adapter into a standard household 120V AC outlet. Note: Use only with the supplied AC adapter to avoid damage or fire.
- Touch On/Off ( to turn on the lamp.
- Touch control button to adjust brightness. There are five levels of brightness.
- Touch to switch between 3 light temperature modes: Warm, Natural, Bright light.
- Touch to activate low level night light.
- Touch once to activate Chroma RGB mood light. Touch once again to hold the current color. Touch to deactivate Chroma RGB mood light.
- Touch On/Off to turn off.
Wireless Charging Specifications:
- Output: 10W/7.5W/5W
Place the Qi-compatible device over the wireless charging icon ().
When the device begins charging, the device will indicate that charging is
active. This feature will not charge all Qi-compatible devices. Please refer
to
your device instructions for enabled capability. The device case or cover
should
be removed to ensure a stable connection.
Charging Status LED Indicator (located near power adapter port)
- Without light- Wireless charging is on standby.
- With light – Wireless charging is active. The device will indicate charging is active
- Fast flashing – Abnormal operation. Recheck the device position, remove the cover, or check Qi compatibility with your device.
The ‘Qi’ symbol is a trademark of the Wireless Power Consortium. All rights reserved.
Specifications
- Light Bulbs: 56 LEDs +8 RGB LEDS
- Brightness Levels: 5 Levels of Brightness
- Light Temperature Modes: 3 Modes (Warm/Natural/Bright Light)
- LED Life: 35,000 hours
- Wireless Charging Output: 10W/7.sW/sw
- Light Output (Lumens): 700LM
- Colour Rendering Index (CRI): 80 Ra
- Correlated Colour Temperature (CCT): Cold (500OK-6500K), Warm (2700K-3000K), Neutral (3000K-4500K)
- Watts: 10w
- Input Voltage: 100-240V 50/60Hz
- Power: DC 12V 2.0A
- Product Size: 6.69″Lx 6.3″Wx 26.38″ H (170mm Lx 160mm Wx 670mm H)
- Product Weight: 2.89 lbs (1.29kg)
For adapter only
Maintenance Instructions
- Read the instruction manual carefully before assembly or use in case of any risk.
- Do not switch the Iight On/Off repeatedly in a short time to protect the lifetime of the LED.
- LED module is not replaceable. Do not break or pull out LED bulbs.
- Do not look directly at the light.
- Keep lamp away from material that may burn.
- Use a dry cloth for daily cleaning.
- For product operation information or a problem resolution, call toll-free at 1-877-654-1991.
FCC Warning
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experience radio/TV technician for help.
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.”
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance between 20cm the radiator and your body.
One Year Limited Warranty I Product Registration
The manufacturer warrants the machine for a period of one year to be free from
defects in material and workmanship; this warranty does NOT cover normal wear
and tear. If any part is found to be defective during the warranty period,
your sole and exclusive remedy will be repair or replacement, at the
manufacturer’s option and expense, of the defective part except for the
shipping cost. It is the responsibility of the consumer to pay the shipping
costs to return the machine to the manufacturer. This warranty is valid for
the original consumer only with original proof of purchase and is not
transferable. This warranty does not apply in cases of abuse, mishandling or
unauthorized repair. The machine contains no serviceable parts. Do not attempt
to service this product yourself, as opening or removing covers may expose you
to the risk of injury. The manufacturer disclaims all liability for injuries
resulting from opening the machine. Mechanical damage resulting from opening
the machine may void the warranty. ANY IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. In no event shall the
manufacturer be liable for any consequential or incidental damages
attributable to this product. This warranty gives you specific legal rights.
You may have other legal rights that vary according to the laws of each
territory. Please retain the original proof of purchase to ensure that your
product is recorded and warranty information received.
Return Instructions
Call 877-654-1991 for a Return
Authorization Number (RA#) in order to return a defective product.
Product Registration
Please register your new product by calling
877-654-1991.
Contact Us
For more information, please call
877-654-1991.
Toll-Free 877.654.1991
An INTEK Brand | We Care. We Share. ©2022 INTEK America Inc. 18528 S.
Dominguez Hills Drive, Rancho Dominguez, CA 90220
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>