EDEN 39005EDAMZ Effortless Bypass Pruning Shears User Manual
- June 10, 2024
- EDEN
Table of Contents
EDEN 39005EDAMZ Effortless Bypass Pruning Shears
Product Information
- Product Name: Effortless Bypass Pruning Shears
- Model Number: 39005EDAMZ
- Max Cutting Depth: 5/8 inch (1.5cm)
- Blade Material: Teflon non-stick blade made of high-quality carbon steel that resists rust and corrosion
- Pivot Point: Yes
- Handle Material: TRP shock-absorbing coated ergonomic handles that fit all hands and provide a soft and non-slip grip
- Built-in Spring Mechanism : Yes
- Safety Lock: Unique clip lock that can be conveniently operated with one hand
- Ideal for: Pruning branches, flowers, and cutting back thin branches. It makes pruning up to two times simpler than traditional tools.
Product Usage Instructions
- For best results, always make the cut above 5/16 inch (8mm) from the bud to allow the wound to heal properly.
- When removing unwanted growth, ensure you make clean cuts that are angled away from the buds.
- Prune parallel to existing branches and leaf nodes to encourage new growth.
- When removing the entire stem, cut back to the point where it branched.
- Slow-growing plants will require only light pruning, while fast-growing plants will require more frequent pruning to keep them healthy.
- The pruner can cut up to 5/8 inch (1.5cm) in diameter.
Maintenance Tips:
- Lubricating your Shears: Lightly coat the blades with olive oil intermittently throughout the year. Don’t forget to lubricate the pivot point to help the blades open and close easier, and the handle spring to help prevent rust.
- Blade Sharpening: Use diamond files to sharpen your blades. You’ll need three levels of coarseness (known as grits): coarse, fine, and extra-fine. Clean the blades with a scouring pad and warm, soapy water. Hold a coarse file at the same angle as the beveled cutting edge (usually between 10 and 20 degrees). Starting at the inside of the blade and work your way outwards. Repeat the
process with the fine and extra-fine files
.Warranty: Eden offers a 2-year limited manufacturer warranty. To submit a warranty claim, please submit a warranty claim on our website https://edengarden.com/contact/
WARNING: This product can expose you to chemicals including styrene, which
is known to the State of California to cause cancer. For more information go
to www.P65Warnings.ca.gov.
Made in Taiwan www.edengarden.com
Product Overview
Ideal for pruning branches, flowers and cutting back thin branches. This pruner will make pruning up to two times simpler than traditional tools. The upper blade first penetrates the plant surface smoothly to prevent crushing the plant. When the blade cuts the plant from the bottom, it also ensures a uniformly precise cut.
General Pruning Tips
- For best results always make the cut above 5/16inch 8mm from the bud. This allows the wound to heal properly.
- When removing unwanted growth ensure you make clean cuts that are angled away from the buds.
- Prune parallel to existing branches and leaf nodes to encourage new growth.
- When removing the entire stem, cut back to the point where it branched.
- Each plant is different, slow growing plants will require only light pruning, fast growing plants will require more frequent pruning to keep them healthy.
cutting diameter
Maintenance Tips
- After each use, we recommend disinfecting the blades using Denatured Ethanol. This helps prevent the spread of disease to other plants and shrubs the next time you are pruning.
- Do not use cleaning agents to clean the plastic parts of the tool. We recommend a mild detergent on a damp cloth.
- Always keep your pruners out of the dirt and rain
- Use coarse steel wool to remove rust and any dried-on remains. Then move on to a finer steel wool grit to restore the sheen of the metal.
Lubricating your Shears:
Intermittently throughout the year, lightly coat the blades with olive oil.
Olive oil keeps dirt and other materials from harming the pruners without
becoming sticky. Don’t forget to lubricate the pivot point to help the blades
open and close easier, and the handle spring to help prevent rust.
Blade Sharpening:
We recommend using diamond files to sharpen your blades. You’ll need three
levels of coarseness (known as grits): coarse, fine, and extra-fine.
-
Clean with a scouring pad and a little warm, soapy water, scrub off all the sap, dried plant bits, and other gunk, and wipe the blades dry.
-
Hold a coarse file at the same angle as the beveled cutting edge (usually between 10 and 20 degrees). Starting at the inside of the blade and using moderate pressure, draw the file toward the tip in a curved motion that follows the shape of the blade and then run the file over the edge to sharpen.
This sharpens the entire blade evenly. For well-maintained pruners, 10 to 20 passes with the diamond sharpener are usually enough;
poorly-maintained pruners may need about 40 to 50. -
Switch to finer grits to further sharpen the beveled edge. Use the fine file first, followed by the extra-fine, using the same number of
passes you used with the coarse file. -
Finish by removing burrs by running the extra-fine file over the back side of the blade a few times. You can also apply a dry or silicone-based lubricant to repel water and reduce the risk of rust and oxidation.
Warranty:
Eden offers a 2-year limited manufacturer warranty. To submit a warranty
claim, please submit a warranty claim on our website
https://edengarden.com/contact/
WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Made in Taiwan www.edengarden.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>