EDEN ED-505 Portable Speaker User Guide
- June 5, 2024
- EDEN
Table of Contents
Model#:ED-505
Portable Speaker
USER GUIDE
BASS BOOM POWER COLORS LIGHTS
INSTRUCTION MANUAL
*The picture is only provided for reference. Please refer to actual the unit!
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Accessories
peaker Unit x1
Instruction Manual x1
Adapter x1
Remote Control x1
Specification:
5.5″ +5.5″ woofer,
2″ tweeter
Battery:7.4V/5,400mA
Power:32W RMS
3.5mm Aux-in
TWS function: Wireless connection, up to 2pcs speakers playing together to
enable sound to be double
USB/Micro SD Card play; FM Radio, Bluetooth connect
Support USB version: USB2.0, USB3.0, up to 64GB storage.
Support Micro SD card up to 64GB storage.
Microphone inputx2
BASS/Treble/Microphone Volume/Echo control
Product Dimension:25×24.2×59.5cm
Product net weight:5.8KG
Play time: 3.5 hours at 100% volume
Charging time:6 hours
Matters need attention:
Keep the speaker far away from flame ignition source, water drop, and water
splash.
It is strictly prohibited to open the speaker without professional guidance.
Top panel operation
- Microphone Input
- Microphone Input
- Aux-in(3.5mm)
- TF/Micro SD Card input
- USB Playback
- DC 9V input(charging slot)
- Charging indicator(red-low power/charging, green-full)
- Power on/off
- Short press to Record songs from microphone to USB/TF, press again to play the recording, long press again to delete the recording
- Microphone priority(when playing USB/TF and pressing this button, the microphone the volume will override songs in USB/TF
- MODE switch
- TWS function(check the last part of the user manual to see operation)
- Light effect switch and on/off.
- MENU(Bass/Treble/MIC volume/MIC bass/MIC treble/MIC echo),long-press this button to restore factory settings
- MIC volume
- Short press to get previous song, long press to fast backward
- Short press to play/pause under USB/TF/BT, and press once to scan all stations and store automatically in FM mode.
- Short press to get the next song, long press to fast forward
- Main Volume.
Remote control
-
Mute
Available to be mute at any mode. -
Previous Song
Under USB/TF card mode – previous song.
Under BT connection mode- previous song. -
Mode
Press shortly to skip to Wireless BT/LINE IN/USB/TF /FM mode. -
Record function
Under USB mode, press the “REC” button to record -
Echo-
Press to decrease the volume in any mode. -
BASS+/-
Press to increase or decrease the bass.
-
EQ function
Press to switch between the different EQ settings. -
Microphone Volume+/-
Press to increase or decrease the microphone volume. -
Stand by
-
Pause &Play
Pause/Play and press once to scan all stations and store automatically in FM mode. -
Next song
Under USB/TF card mode – next song.
Under BT connection mode- next song. -
Light mode
Light effect switch and on/off -
Repeat function
Press to repeat one song or repeat all songs.
In Wireless BT mode, this button has no function. -
Record play
In USB mode, press to play the record. -
Record delete
In USB mode, press to delete the record. -
Echo+
Press to increase the Echo in any mode. -
Microphone priority
When the Microphone is in use, press once to take priority over the music program, press again to turn off this function. -
Treble+/-
Press to increase or decrease the Echo in any mode. -
Main Volume
-
Number buttons
Under USB/TF mode to choose songs.
In other modes, these buttons have no functions.
OPERATING INSTRUCTIONS
● Wireless BT Pairing Mode:
Press MODE or Blue button on the unit or the remote control until BT is
selected.
-
Put the cell phone within 10 meters;
-
Activate the BT features on your cell phone so that the cell phone starts to search for the BT
device. Please refer to the users’ manual for details -
Select the correct model No. (ED-505)The device was found by the cell phone;
-
Shortly press PLAY/PAUSE button to play or pause music. Short press key to select the previous or next track.
● LINE IN MODE:
Press the MODE button on the unit or the remote control until the LINE is
selected. Play the music of the device connected to the LINE input.
● USB /TF CARD Mode :
- After start-up, press the mode button to select ‘USB or TF card’ mode, or insert the USB or TF card in this speaker, the unit will play the songs automatically.
- Press the “ ” key shortly to pause or play.
- Shortly press the key to the previous song.
- Shortly press key to the next song
● FM Mode
-Turn on the power and press the MODE button repeatedly to select the FM function (the frequency is displayed on the display).
-Press the play button to activate the automatic memorization (the tuner searches for stations available and memorizes automatically). The number of memorized stations depends on the reception in your area.
-Use the next/previous buttons to listen to the memorized stations.
-To select a memorized station directly, press the corresponding numeric key on the remote control.
● TWS Mode
- Turn on these 2 speakers together, press TWS button on the top panels of one speaker, speaker display will show ‘BLUE’.
- Turn on your Bluetooth devices, and put these Bluetooth devices near the speaker within 10 meters.
- Search the pairing name (ED-505 )from your Bluetooth devices, and tap to connect it.
- Press TWS button on the other speaker, this speaker display will show ‘BLUE’ and keep blinking, you will hear ‘ding dong’ after both speakers connected successfully, and the ‘BLUE’ on display will stop blinking.
- Now you can play songs from your Bluetooth devices.
- Long press TWS button from any device to disconnect TWS function.
Note :
The speaker connects to your Bluetooth devices which means that it is a Host
speaker.
The other speaker is the assistant speaker.
Warning: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (I) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the pony responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Pan 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operated
in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines. This equipment
should be installed and operated with a minimum distance of x cm from the
radiator of your body. This device and its antenna(s) must not be co-located
or operated in conjunction with any other antenna or transmitter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>