Bravetti EK119B Programmable Electric Kettle Owner’s Manual

June 13, 2024
Bravetti

Bravetti-logo

Bravetti EK119B Programmable Electric Kettle

Product Information

The Programmable Electric Kettle is a kitchen appliance designed for heating water quickly and efficiently. It is manufactured by EURO-PRO Operating LLC, a company based in Boston, MA. The kettle features a programmable function that allows users to set the desired temperature for different types of beverages. It also comes with a power base for easy operation and a water level window for accurate measurement.

Important Safety Instructions

  1. Read all instructions before using the Programmable Electric Kettle.
  2. Ensure that the voltage indicated on the appliance matches the voltage in your home. If not, contact your dealer and do not use the kettle.
  3. Avoid touching hot surfaces and always use handles or knobs.
  4. Supervise the appliance when used by or near children.
  5. Do not immerse the cord, plug, or kettle in water or any other liquids to protect against electric shock.
  6. Avoid letting the cord hang over the edge of a table or counter or touch hot surfaces.
  7. If the appliance malfunctions or is damaged, do not operate it Return it to EURO-PRO Operating LLC for examination, repair, or adjustment.
  8. Avoid placing the hot kettle on flammable materials or near paper or cloth.
  9. Position the kettle properly on the power base before switching it on.
  10. Never leave the kettle unattended when plugged in and ensure adequate air space for air circulation.
  11. Always place the hot kettle on an insulated heat pad and avoid surfaces where heat may cause a problem.
  12. Avoid placing the base or kettle on or near a hot gas or electric burner.
  13. Only use the kettle with the provided power base and never on a range top or in a microwave oven.
  14. Always unplug the power base and empty the kettle when not in use.
  15. Do not allow liquid to evaporate from the kettle or heat it when empty.
  16. Use only the provided power base and keep it clean and dry.
  17. To disconnect, press the ‘On/Off’ button, ensure that the ‘On/Off’ LED is not illuminated, and then remove the plug while holding it.
  18. Be extremely cautious when moving the kettle with hot liquids.
  19. Ensure that the water level does not go below the ‘MIN’ mark on the kettle body.
  20. Always close the lid and ensure the filter is in place during use. Avoid removing the lid during brewing cycles to prevent scalding.
  21. Avoid filling the kettle above the ‘MAX’ mark as boiling water may be ejected if overfilled.
  22. Place the kettle on a stable and flat surface.
  23. Pour boiling water slowly and carefully without tipping the kettle too fast.
  24. Turn the spout away from walls or cabinets to avoid steam damage.
  25. Avoid contact with steam from the spout when the water is boiling or just after it has switched off.
  26. Do not use scouring powders, steel wool pads, or abrasive materials to clean the kettle as they may damage the appliance’s finish.

For more detailed information and instructions on using the Programmable Electric Kettle, please refer to the owner’s manual available at <https ://manual-hub.com/>.

IMPORTANT SAFETY INSTRUCTIONS

When using your ProgrammableElectric Kettle, basic safety precautions should always be observed, including the following:

  1. Read all instructions before using your Programmable Electric Kettle.
  2. Before connecting the kettle to the power supply, check that the voltage indicated on the appliance (underside of the power base) corresponds with the voltage in your home. If this is not the case, contact your dealer and DO NOT use the kettle.
  3. Do not touch hot surfaces. Always use handles or knobs.
  4. Close supervision is necessary when any appliance is used by or near children.
  5. To protect against electric shock, do not immerse cord, plug or kettle in water or any other liquids.
  6. Do not let cord hang over edge oftable or counter, or touch hot surfaces.
  7. Do not operate appliance with damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to EURO-PRO Operating LLC for examination, repair or adjustment.
  8. Do not place hot kettle on or near paper, cloth or other flammable material.
  9. Position the kettle properly on the power base before switching on.
  10. Never leave the kettle unattended when plugged in. When using this appliance, provide adequate air space above and on all sides for air circulation.
  11. Never place a hot kettle on surfaces where heat may cause a problem. Always place hot kettle on an insulated heat pad.
  12. Do not place the base or the kettle on or near a hot gas or electric burner.
  13. Never place or use the kettle on a range top or in a microwave oven. Use only with the power base.
  14. Always unplug the power base and empty the kettle when not in use.
  15. Do not allow liquid to evaporate fromkettle. Do not heat kettle when empty.
  16. Use only the power base provided, and keep it clean and dry.
  17. To disconnect, depress ‘On/Off’ button, and ensure that ‘On/Off’ LED is not illuminated. Then remove the plug. Always hold the plug, and never pull the cord.
  18. Extreme caution must be used when moving an appliance containing hot liquids.
  19. Never put less water in the kettle to boil than is indicated by the “MIN” mark on the water level window.
  20.  Always ensure that the lid is closed and the filter is in place when using the appliance. Do not lift the lid when the unit is in use. Scalding may occur if the lid is removed during the brewing cycles.
  21. Do not fill above the ‘MAX’ or below the ‘MIN’ mark on the kettle body.
    • WARNING: If this kettle is overfilled, boiling water may be ejected.
  22. Ensure that the kettle is on a stable, flat surface.
  23. Always take care to pour boiling water slowly and carefully without tipping the kettle too fast.
  24. To avoid possible steam damage, turn spout away from walls or cabinets during use.
  25. Avoid contact with steam from the spout when the water is boiling or just after it has switched off.
  26. Do not clean kettle with scouring powders, steel wool pads or other abrasive materials as these will damage the finish of the appliance.
  27. Do not use outdoors or while standing in a damp area.
  28. Do not use appliance for other than intended use.
  29. Lift and tilt cover away from you carefully to avoid scalding and allow water to drip into unit.
  30. USE CARE when opening the lid for refilling when the kettle is HOT.
  31. Do not hold the switch in the Temperature” hold position or tamper with the switch to fix it in the “ON” position as this may cause steam to be ejected from around the lid and could damage the automatic switch-off mechanism.
  32. Do not attempt to connect any other appliance to the power base unit, or tamper with the connector in any way.
  33. Do not touch the kettle with wet hands.
  34. Do not place any utensils or baby bottle into the kettle.
  35. WARNING: Do not place the power base unit onto any metal surfaces such as metal trays or stove tops when it is plugged into a power source of any kind.

Always unplug the power base when the appliance is not in use.
This unit has a short power supply cord to reduce the risk resulting from becoming entangled in or tripping over a long cord. It is not recommend to use an extension cord but should one be required:

  1. An extension cord may be used if the electrical rating is equal to or greater than the rating of the kettle. Use an extension cord rated 15 amperes or greater.
  2. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

WARNING: Danger of Scalding. Please use caution when using the kettle. The steam emitted from this appliance is very hot.

GETTING TO KNOW YOUR PROGRAMMABLE ELECTRIC KETTLE

  1. Lid
  2. Anti-Scale Filter
  3. Lid Hinge Pins
  4. Pouring Spout
  5. Main Unit
  6. Lid Release Button
  7. Cool Touch Handle
  8. Water Level Window
  9. Power Base With Cord Storage
  10. Power Connector
  11. Temperature Hold Light
  12. Power On Light
  13. On/Off Button
  14. Temperature Hold Button
  15. LED Temperature Display
  16. Variable Temperature Control
  17. Control Panel

Technical Specifications

Voltage: 120V., 60Hz.
Power: 1500 Watts

Note: Illustrations may differ from actual units.

FEATURES OF PROGRAMMABLE ELECTRIC KETTLE

  1. LED TEMPERATURE DISPLAY
    • The LED temperature display screen will display the temperature selected.
  2. LID RELEASE BUTTON
    • The lid release button allows you to open the lid without touching hot areas.
  3. POWER “ON” LIGHT
    • The power “On” light will illuminate when the “On/Off” button is pressed to the “On” position. It will turn off when the “On/Off” button is pressed to stop the boiling process or when the desired temperature has been reached.
  4. VARIABLE TEMPERATURE CONTROL
    • Turning this knob will select the water temperature desired. The temperature goes up in 5˚ increments from 30˚C to 100˚C. 100˚C is shown as a series of automated symbols. Pushing this knob will automatically set it to the boiling point (100˚C).
  5. ANTI-SCALEFILTER
    • To protect your beverages from water scale deposits.
  6. TEMPERATURE HOLD BUTTON
    • Press this button to keep the heated water at the temperature selected.
  7. CONCEALED HEATING ELEMENT
    • Concealed heating element provides faster heating and easier clean-ups.
  8. POWER BASE WITH CORD STORAGE
    • Allows for easy cord storage.
  9. WATER LEVEL WINDOW
    • Easy-to-read indicators let you know how much water is left.
  10. AUTO SHUT-OFF
    • Will turn the unit off when the water has reached the set temperature or the kettle is empty.
  11. SAFETY SHUT-OFF
    • Will turn the unit off if there is no water left in the kettle.

OPERATING INSTRUCTIONS

Preparing Your Kettle

BEFORE FIRST USE: Remove any packaging material or stickers from your kettle.

  1. Place the power base on a flat, stable surface.
  2. Fill the kettle to the “Max” indicator on the water level window (2 Liters). (Fig. 1)
  3. Ensure that the anti-scale filter is attached to the lid. If it is not, then snap the anti-scale filter into place.
  4. Snap the lid onto the lid hinge pins that are on either side of the kettle and lock the lid in place.
  5. Place the kettle on the power base and press the On/Off button.
  6. Set the variable temperature control to the highest temperature setting (100˚C) and let the water come to a boil until the kettle shuts off automatically. (Fig. 2)

Using Your Kettle

  1. Lift the kettle off the base before filling.

  2. Press the lid release button for easy filling. (Fig. 3)

  3. Fill the kettle with the desired amount of water using the water level window as your guide. Ensure that water is between the ‘MIN’ and ‘MAX’ levels.

    • CAUTION: Do not allow the kettle to boil dry as this will cause damage to the kettle.
    • WARNING: If the kettle is overfilled, there is a risk that water will spit out of the spout.
  4. Make sure that the lid is securely locked in place and that the kettle is seated correctly on the base.

  5. The LED temperature display on the control panel will blink ‘OFF’ when the kettle is placed on the power base. Press the On/Off button to turn the unit “On”. The power “On” light will illuminate.

  6. Turn the variable temperature control to the desired temperature, 30°C to 100°C or push it to set it directly to 100°C . Once the temperature of the water has reached the set temperature, the unit will automatically shut off and the power “On” light will turn off.

  7. If you wish to keep your water at the set temperature, press the temperature hold button. The temperature hold light will now illuminate. (Fig. 4)

  8. To stop the temperature hold feature, press the temperature hold button one more time and the temperature hold light will turn off.

  9. To turn the unit “Off” depress the On/Off button. The power “On” light will turn “Off”.

    • Remove the kettle from the power base for convenient and easy serving.
    • CAUTION: Do not place hot kettle directly on furniture or flammable materials. Use a hot plate or cloth under the kettle when placing on a table, countertop or other furniture.
    • NOTE: The kettle will not turn on if the temperature of the water in the kettle is higher than the temperature selected.
  10. After use, empty the kettle and ensure that the temperature hold is “Off”.
    The unit will automatically shut off when the set temperature of the water has been reached.

  11. Unplug the power base from the electrical outlet.

Care and Maintenance of Your Kettle

WARNING: Always disconnect the appliance from the power source before cleaning. Never immerse the kettle or base in water or any other liquid.
It is necessary to clean your cordless kettle regularly to ensure optimum performance. Mineral deposits in tap water may cause the water level window and the inside of the kettle to discolor.

  1. To remove build-up, fill the kettle with 1 part vinegar and 5 parts water and leave it unplugged overnight or for a period of approximately 8 hours. Do not use cordless kettle while descaling solution is inside.
  2. After the period of soaking, empty the kettle. Due to the fact that a small amount of solution will be left in the kettle, it is necessary to rinse the kettle out with clean water 2 or 3 times. Your kettle is now ready for use.
  3. The outside of the kettle can be wiped clean with a soft damp cloth.

NOTE: Never use any chemical, steel wool, or abrasive cleaners to clean any part of the kettle.

To Shorten Power Cord Length:

  • Wrap the extra cord length around hidden cord storage until length is correct for base placement. Make sure that the cord has been properly wrapped and the base is seated firmly.

Don’ts

  • Never use the cordless kettle for boiling or heating anything other than water.
  • Never place any utensils, containers or baby bottles in unit.
  • Never immerse unit or power base in water or any other liquid.
  • Never let unit run dry.
  • Never leave unit unattended when in use.

Do’s

  • Use caution when pouring hot water.
  • When boiling water for baby formula, always boil water to boiling point (100°C) and then let it cool. Follow the manufacturer’s instructions on how to prepare the baby formula.
  • Always ensure that there is water in kettle before turning the unit on.
  • Always use fresh water.
  • Always unplug power base when unit is not in use.
  • Rinse the anti-scale filter regularly.
  • Hold kettle firmly when lifting from power base.

Hints & Tips

  • Boil water for hot water bottles.
  • Heat water for manicures and pedicures.
  • Boil water for baby formulas.
  • Warm water for warm compresses.
  • Boil water for tea, coffee and instant soup broth.

TROUBLESHOOTING GUIDE

TROUBLESHOOTING GUIDE

PRO BLEM| PO SSIBLE RE ASO N| PO SSIBLE SO LUTIO N
Flashing “Off” on LCD| ****

| The kettle has not been programmed.| 1.     Depress the On/Off button and select a desired

temperature.

Water does not boil| ****



| The kettle is not plugged into a 120V AC electrical outlet.

The ‘On/Off’ button was not depressed to start the

heating process.

| 1.      The kettle must be plugged into a 120V AC electrical

outlet.

2.      Depressed the ‘On/Off’

button to start the heating process.

‘On/Off’ light will not illuminate when

depressed

| ****

| Water has not cooled down from the desired temperature.| 1.     Increase temperature selection.

ONE (1) YEAR LIMITED WARRANTY

  • EURO-PRO OPERATING LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use.
  • If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For Customer Service support, call 1 800-798-7398 or visit our website www.euro-pro.com.
  • If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of purchase date and $12.95 to cover the cost of return shipping and handling must be included liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This limited warranty does not cover damage caused by misuse, abuse, negligent handling, or damage due to faulty packaging or mishandling in transit. This warranty is extended to the original purchaser of the unit and excludes all other legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC, if any, is limited to the specific obligations expressly assumed by it under the terms of the limited warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province to province.
  • Important: Carefully pack items to avoid damage in shipping. Be sure to include proof of purchase date and to attach the tag to the item before packing with your name, complete address, and phone number with a note giving purchase information, model number, and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.

OWNERSHIP REGISTRATION CARD FOR CANADIAN CONSUMERS ONLY

  • Please fill out and mail the product registration card within ten (10) days of purchase. The registration will enable us to contact you in the unlikely event of a product safety notification.
  • By returning this card you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
  • RETURN TO EURO-PRO OPERATING LLC, 4400 Bois Franc, St. Laurent, QC, H4S 1A7
  • EK119B __
  • Appliance model ___
  • Date purchased Name of store __
  • Owner’s name ____
  • Address City Prov. Postal Code___
  • EURO-PRO Operating LLC Boston, MA, 02465
  • 1800-798-7398
  • www.euro-pro.com

Documents / Resources

| Bravetti EK119B Programmable Electric Kettle [pdf] Owner's Manual
EK119B Programmable Electric Kettle, EK119B, Programmable Electric Kettle, Electric Kettle
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals